TORK S4 Dose Sensor Soap and Sanitizer Dispenser User Guide
- June 17, 2024
- TORK
Table of Contents
TORK S4 Dose Sensor Soap and Sanitizer Dispenser
Product Information
Specifications:
-
Product Name: Dose Sensor for Tork Soap and Sanitizer
Dispenser -
Model: S4
-
Model: S5
-
Battery Type: AAA LR03 (x2)
-
Dimensions: 3mm
-
Country of Origin: Sweden
-
Version: A
Product Usage Instructions:
Step 1: Installing the Dose Sensor
To install the Dose Sensor for Tork Soap and Sanitizer Dispenser, follow these steps:
- Make sure the dispenser is turned off and has no power supply.
- Locate the Dose Sensor slot on the dispenser.
- Insert the Dose Sensor into the slot until it clicks into place.
- Ensure the Dose Sensor is securely attached.
Step 2: Replacing the Battery
If the battery of the Dose Sensor needs to be replaced, follow these steps:
- Make sure the dispenser is turned off and has no power supply.
- Locate the battery compartment on the Dose Sensor.
- Slide open the battery compartment cover.
- Remove the old batteries from the compartment.
- Insert three AAA LR03 batteries into the compartment, following the correct polarity (+/-).
- Close the battery compartment cover securely.
FAQ
Q: How do I know when the Dose Sensor battery needs to be replaced?
A: When the Dose Sensor stops functioning or the dispenser fails to dispense soap or sanitizer, it is likely that the battery needs to be replaced.
Q: Where can I find the contact information for Essity?
A: For UK customers, you can contact Essity UK Limited at Southfields Road, Dunstable, Bedfordshire, LU6 3EJ, UK. Phone: +44 1582 677400. For North American customers, the distributor is Essity HMS North America Inc located at 2929 Arch Street Suite 2600 Philadelphia, PA 19104.
Q: Can I use any other type of battery for the Dose Sensor?
A: No, the Dose Sensor requires three AAA LR03 batteries. The use of any other battery type may damage the sensor and void the warranty.
WHAT IS IN THE BOX
INSTALLATION
Dose Sensor for Tork Soap and Sanitizer Dispenser
Replace battery
Manufactured by Essity Hygiene and Health AB SE-405 03 Göteborg, Sweden
Visiting address: Mölndals Bro 2, Mölndal
UK:
Essity UK Limited
Southfields Road, Dunstable, Bedfordshire, LU6 3EJ, UK+44 1582 677400
North America:
Distributed by Essity HMS North America Inc
2929 Arch Street
Suite 2600
Philadelphia, PA 19104
www.essity.com
www.torkglobal.com
Made in Sweden