Weili WLG3-505V-US Bidet Toilet Seat User Manual

: June 17, 2024
: WEILI

Weili WLG3-505V-US Bidet Toilet Seat

Specifications

Model: WLG3-505V-US, WLG4-505V-US, WLJG3-505V-US, WLJG4-505V-US, WLG3-505D-US, WLG4-505D-US, WLJG3-505D-US, WLJG4-505D-US
Correct specifications depend on the actual model
All specifications are subject to change without prior notice

Important Safeguards
When using electrical products, especially when children are present, basic safety precautions should always be followed. Please read all instructions before using.

Grounding Instructions
This product should be grounded to reduce the risk of electric shock. The grounding wire with a grounding plug must be plugged into a properly installed and grounded outlet. If repair or replacement of the cord or plug is necessary, do not connect the grounding wire to either flat blade terminal. The grounding wire is insulated with an outer surface that is green with or without yellow stripes. If you are unsure about the grounding instructions or if the product is properly grounded, consult a qualified electrician or serviceman.

Content

Important safeguards
Functional differences of different models
Safety precautions
Part name
Product installation
Confirmation before use
How to use
Function description
Cleaning procedure
Not in use for long time
Quick judgment and maintenance for the trouble
Technical parameters
Service/maintenance guide
Warranty service card

Product Usage Instructions

Part Name
Before using the bidet toilet seat, familiarize yourself with the different parts:

Seat heating
Water heating
Rear/Female Wash
Warm air drying
Deodorization
Auto lid open/close
Lid slow close
Auto flushing
Smart Remote Control
Leakage protection
Moving wash (if available)
Massage (if available)
Laxative (if available)
Self-cleaning (if available)
Antibacterial seat (if available)
External filter (if available)
Energy saving (if available)

Product Installation
Before starting the installation work, carefully read the installation manual provided. If you encounter any problems during installation or experience performance issues, please contact us for assistance.

Confirmation Before Use
Prior to using the bidet toilet seat, ensure the following:

Proper installation as per the installation manual
All connections are secure
No visible damage to the unit
The power supply is properly grounded

How to Use
To use the bidet toilet seat:

Sit on the seat and adjust the position as desired
Use the smart remote control or buttons on the unit to select the desired function
Adjust water temperature and pressure settings as needed
After use, activate the cleaning procedure
Wait for the warm air drying function to complete (if desired)
Flush the toilet using the auto flushing function (if available)

Function Description
The bidet toilet seat offers various functions for personal hygiene and comfort. These include:

Seat heating
Water heating
Rear/Female Wash
Warm air drying
Deodorization
Auto lid open/close
Lid slow close
Auto flushing
Smart Remote Control
Leakage protection
Moving wash (if available)
Massage (if available)
Laxative (if available)
Self-cleaning (if available)
Antibacterial seat (if available)
External filter (if available)
Energy saving (if available)

Cleaning Procedure
To clean the bidet toilet seat:

Turn off the power supply
Wipe the surface of the unit with a soft cloth and mild detergent
Do not use abrasive cleaners or solvents
Ensure all parts are dry before reactivating the power supply

Not in Use for a Long Time
If the bidet toilet seat will not be used for an extended period:

Turn off the power supply
Disconnect the water supply
Cover the unit to protect it from dust and debris

Quick Judgment and Maintenance for the Trouble
If you encounter any issues with the bidet toilet seat, consult the troubleshooting section of the manual for quick judgment and maintenance instructions. If the problem persists, contact our customer service for further assistance.

Technical Parameters
Refer to the technical parameters section of the manual for detailed information about the specifications and technical aspects of the bidet toilet seat.

Service/Maintenance Guide
The service/maintenance guide provides instructions on how to properly maintain and service the bidet toilet seat. Follow the recommended maintenance schedule to ensure optimal performance and longevity of the product.

Warranty Service Card
Keep the warranty service card properly for future reference. In case of any warranty-related issues, refer to the warranty service card for instructions on how to proceed.

FAQ

Q: Can I reuse the old inlet hose?
A: No, please use the new hose assembly included with the product. Do not reuse the old inlet hose.

Q: Is the product compatible with a potable water system?
A: Yes, if connected to a potable water system, the system must be protected against backflow.

Before starting installation work, read the manual carefully. If you encounter any problems in installation or performance, please be sure to contact us. Our contact information is on the bottom page of the manual. There is a guarantee in this manual, so please keep it properly and take it out for reading when necessary.

IMPORTANT SAFEGUARDS

When using electrical products, especially when children are present, basic safety precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING

GROUNDING INSTRUCTIONS
This product should be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing an escape wire for the electric current. This product is equipped with a cord having a grounding wire with a grounding plug. The plug must be plugged into an outlet that is properly installed and grounded.

DANGER – Improper use of the grounding plug can result in a risk of electric shock. If repair or replacement of the cord or plug is necessary, do not connect the grounding wire to either flat blade terminal. The wire with insulation having an outer surface that is green with or without yellow stripes is the grounding wire. Check with a qualified electrician or serviceman if the grounding instructions are not completely understood, or if in doubt as to whether the product is properly grounded. This product is factory equipped with a specific electric cord and plug to permit connection to a proper electric circuit. Make sure that the product is connected to an outlet having the same configuration as the plug. No adapter should be used with this product. Do not modify the plug provided — if it will not fit the outlet, have the proper outlet installed by a qualified electrician. If the product must be reconnected for use on a different type of electric circuit, the connection should be made by qualified service personnel.

CAUTION : Risk of property damage. If it is necessary to use an extension cord, a single cord may be used provided that the “Type” begins with “SJ”, the cord is a 12 gauge, grounded (12/3), is no longer than 25 feet (7.6 meters), and is plugged into a GFCI* electrical outlet. Promptly replace an extension cord that exhibits any sign of damage.

DANGER – To reduce the risk of electrocution:

Do not use while bathing.
Do not place or store product where it can fall or be pulled into a tub or sink.
Do not place in or drop into water or other liquid.
Do not reach for a product that has fallen into water. Unplug immediately.

WARNING – To reduce the risk of burns, electrocution, fire, or injury to persons.

Close supervision is necessary when this product is used by, on, or near children or invalids.
Use this product only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer.
Never operate this product if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return the product to a service center for examination and repair.
Keep the cord away from heated surfaces.
Never block the air openings of the product or place it on a soft surface, such as a bed or couch, where the air openings may be blocked. Keep the air openings free of lint, hair, and the like.
Never use while sleeping or drowsy.
Never drop or insert any object into any opening or hose.
Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.
Connect this product to a properly grounded outlet only. See Grounding Instructions.
Unplug this product before filling. Fill (reservoir) with water only unless otherwise specified by the manufacturer. Do not overfill (or specify filling instructions).

SAVE THESE INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING (THIS APPLIANCE)

WARNING – To reduce the risk of fire, electric shock, or injury:

Do not leave Appliance when plugged in. Unplug from outlet when not in use and before servicing.
Do not allow to be used as a toy. Close attention is necessary when used by or near children.
Use only as described in this manual. Use only manufacturer’s recommended attachments.
Do not use with damaged cord or plug. If Appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center.
Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not run Appliance over cord. Keep cord away from heated surfaces.
Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
Do not handle plug or Appliance with wet hands.
Turn off all controls before unplugging.

SAVE THESE INSTRUCTIONS Please use the new hose assembly included with the product. Do not reuse old inlet hose.

WARNING : IF A CONNECTION IS MADE TOA A POTABLE WATER SYSTEM, THE SYSTEM SHALL BE PROTECTED AGAINST BACKFLOW

Functional differences of different models **

**

Please confirm the model you purchased first, and then check the corresponding function. The model and specification can be found on the nameplate at the rear of the machine. indicates that the function is available and the blank indicates that no such function.

Models

Functions

|

WLG3-505V-US WLG3-505D-US

|

WLG4-505V-US WLG4-505D-US

|

WLJG3-505V-US WLJG3-505D-US

|

WLJG4-505V-US WLJG4-505D-US

---|---|---|---|---

Basic functions

| Seat heating| ○| ○| ○| ○
Water heating| ○| ○| ○| ○
Rear/Female Wash| ○| ○| ○| ○
Warm air drying| | ○| | ○

Additional functions

| Deodorization| ○| ○| |
Auto lid open/close| ○| ○| |
Lid slow close| ○| ○| ○| ○
Auto flushing| | | |
Smart Remote

Control

| ○| ○| ○| ○
Leakage protection switch| ○| ○| ○| ○
Moving wash| ○| ○| ○| ○
Massage| ○| ○| ○| ○
Laxative| ○| ○| ○| ○
Sterilization of electrolyzed water| | | |
Antibacterial seat| ○| ○| ○| ○
External filter| ○| ○| ○| ○
Energy saving| ○| ○| ○| ○

SAFETY PRECAUTIONS

In order to prevent hazards and property losses caused by users and others, please read the safety precautions in detail to use this product correctly. The following information is related to safety, please pay special attention! The logo and its meaning are described below：

Warning
It means that if you ignore this sign and misoperate, you may cause serious injury or death.

Caution
It means that if this sign is ignored and misoperated, personal injury or financial loss may be caused.

WARNING
Do not splash the product with water. May cause fire or electric shock.

Reminder：
Children, people with physical (intellectual) defects and lack of experience or common sense should be accompanied by special personnel when using this product.This product must be connected with cold water supply (water inlet temperature is 1-40 ℃), otherwise, it may burn or the machine failure.

WARNING
If you ignore this sign and operate incorrectly, it may cause danger!

Check whether the power socket is grounded.This product must be well grounded and can only be connected to the special 120V, 60Hz, 10A circuit with grounding fault short circuit or grounding leakage protector.
It is only suitable for AC voltage of 120V (60Hz). It is forbidden to use too much load on the same socket.May overheat or cause fire.
Do not plug/unplug the power plug when your hands are wet. May get electric shock hazard.
Remove the dust on the plug and completely insert the plug into the socket. Pull out the plug and clean it with a dry cloth.
Do not use loose sockets. May cause fire or electric shock.
Do not pour water or detergent on the bodyor power plug. May cause fire or electric shock.
Do not pull the power plug or power cord at will. May cause fire or electric shock
Please pull out the plug before cleaning the product. May get electric shock hazard.
Do not put high temperature and inflammables near the product. May cause fire
Ensure that the product uses tap water, and do not use other water sources other than tap water that do not meet the sanitary standards.
- May cause skin infection
- May cause machine failure
Do not disassemble or refit the product by yourself. May cause fire or electric shock
Do not bend or twist the water hose. May be leaking
Do not place heavy objects on the seat ring or cover. May damage the product.
Do not close the seat cover and seat ring with force. May damage the product.
Do not use the following items to clean this product, paint thinner, decontamination powder, nylon brush, etc. May damage the product.
When replacing the power cord, observe the following:
- If the power cord is damaged, contact the retail store where you purchased this product or the nearby customer service center.
- Only authorized technicians can replace the power cord.
Do not expose the product to direct sunlight. May causes discoloration, plastic corrosion and damage
When using the product, make sure you don’t clean against the cover.The cover may be damaged.
Do not use DC or AC power supply with voltage not 120V. May cause product fault
Do not pour on the body and nozzle

Part name

The figure on the right is applicable to the following models

WLJG3-505V-UL/WLJG3-505D-UL
WLJG4-505V-UL/WLJG4-505D-UL
WLG3-505V-UL/WLG3-505D-UL
WLG4-505V-UL/WLG4-505D-UL

Product installation

Size requirements of adapter cover

A. Distance from water tank to the front of toilet: 505-535mm.
B. Distance from mounting holes to the back edge of toilet bowl: ≤70mm.
C. Spacing between two mounting holes: 118-182mm.
D. Distance from mounting hole to water tank: ＞30mm.

Preparation before installation
Before installing the smart toilet cover:

Remove the existing toilet cover and close the water supply system of the toilet cover.
Press the flush button to release the pressure from the water supply pipe.
Place a container under the inlet valve to fill the excess water.
Close the water inlet angle valve and disconnect the connection between the water inlet valve of the toilet cover and the water supply pipe.

Caution: When determining the outlet position of the circuit, it is necessary to follow the local standards.

Install circuit outlet:

Before installation, please reserve a power socket within about 1m on the right side of the toilet.
It is recommended to use a waterproof socket instead of extension cord connection products.

All ceramic body outline drawings in this manual are for demonstration only.

Install the fixing plate

Install the expansion rubber plug into the mounting hole of the ceramic body.
Place a fixing plate above the mounting hole of the ceramic body.
Thread the bolt into the long hole of the adjusting block.
The adjusting block shall be placed in the groove of the fixed plate in parallel, use the installation cardboard to assist in positioning the retainer plate, and the adjusting block shall be locked on the fixing plate with bolts.

Install the toilet lid

Align the bottom of the toilet with the direction of the fixing plate, and let the toilet push in the direction of the arrow. When you hear the “click” sound, it indicates that it is installed in place.

Warm tip:
Tips for fixing plate installation: first tighten the fixing plate to 70%, install the toilet cover, adjust the position, then press and hold the push rod to remove the toilet cover, tighten the bolts of the fixing plate, and finally install the toilet cover.

Remote control installation
(Some models do not have a control remote).

Installation method I

Remove the EVA adhesive sticker on the back of the remote control base.(as shown in Figure 1).
Stick the remote control base at the verified position.(as shown in Figure 2).
After the base is installed, put the remote control on the base as shown in the figure.(as shown in Figure 5 and Figure 6)

Installation method II

Facing the fixing hole of the remote control base, drill two expansion pipe holes with diameter of 6 on the wall and insert the expansion pipe.(as shown in Figure 3)
Install the remote control base and fix it with screws.(as shown in Figure 4)
After the base is installed, put the remote control on the base as shown in the figure.(as shown in Figure 5 and Figure 6)

Power on and water supply

Connect the water supply
Connect the external water source with the water inlet with the equipped hose and filter screen.

CAUTION
The plug shall be connected to an effectively grounded socket. Otherwise, electric shock may be caused in case of power failure or leakage.

Turn on electricity

Install 120V (more than 10A) socket at a position above 50cm from the ground.
The socket shall be installed where the water is not easy to splash.
Use a grounded socket. Insert the power plug of the product into the socket.

WARNING!
Please connect the power supply according to the product power supply requirements, otherwise, it may cause product fault.

Confirmation before use

Open valve
Open the inlet valve to provide water for the whole machine.

Confirmation and commissioning

Check power supply.
Confirm that the power plug is plugged in tightly and the indicator light on the plug is on, indicating that the system has been powered on. If the indicator light is not on, you can press the “reset” button on the plug to power on. After power on, you can hear the “tick” sound of the system buzzer.
Human-body seating sensor
In the area shown in the figure, someone raises the seat sensing. The system function can be enabled only when the system senses that someone is seated.
Check basic functions
When the human body seating sensing is on, press the “ ” or “ ” function on the quick panel to start the corresponding function.
Check the drying function
When the human body is seated in the conduction state, press the “ ” function on the quick panel to start the corresponding function.

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

this device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. The device has been evaluated to meet general RF exposure requirements.

How to use

Quick use of knob

Turn backward to start rear wash function, and turn again to reduce water pressure.
Turn forward to start the female wash function, and turn again to increase the water pressure.
Long press for 2 seconds to facilitate defecation (some models do not have this function), rotate again to water pressure gear cycle. In noncleaning state: Press once to start the drying mode. In the cleaning state, press once to stop the current mode, and press again to start the drying mode.

How to use the button
Water temperature button: Short press the button to switch the water temperature to level1, level2, level3, off, and cycle in turn. Long press the button to switch the nozzle moving or fixed cleaning state when using the rear wash/female wash function . Seat temperature button: Short press the button to switch the seat temperature to level1, level2, level3, off, and cycle in turn. Long press the button to switch the nozzle position to level1, level2, level3, level2, level1, and cycle in turn when using the rear wash/female wash function.

Stop| Press the stop button to end the running function such as “rear wash”, “female wash”, “air drying” and “pulse wash”.| (Some models without this function)
---|---|---

Rear Wash

| When the seat ring senses by its sensing are that someone is sitting, and press the Rear Wash button in stop or other modes, it will start the washing function after a beep, and stop after 90 seconds. If the person leaves the seat ring during the function is running, the function will be stopped.

Female Wash

| When the seat ring senses by its sensing are that someone is sitting, and press the

Female Wash button in stop or other modes, it will start the washing function after a beep, and stop after 90 seconds. If the person leaves the seat ring during the function is running, the function will be stopped.

Power Wash

| When the seat ring senses by its sensing are that someone is sitting, and press the Power Wash button in stop or other modes, it will start the washing function after a beep, and stop after 90 seconds. If the person leaves the seat ring during the function is running, the function will be stopped.
Wind temperature| Press the water pressure button to change the water pressure of “rear wash” and “female wash” modes. The water pressure has three levels.
Water temperature| Press the water temperature button to increase the water temperature in the “rear

wash” and “female wash” modes. It has three levels and stand-by mode. 3 level is the highest and stand-by mode means all the indicated lights are off.

Seat temperature| Press the seat temperature button to change the temperature of the seat ring. The

seat ring temperature has 3 levels and stand-by mode. Level 3 is the highest and stand-by mode means all the indicated lights are off.

Lid open/clos| Press the lid open/close button to open the toilet lid, and then press the button again to close it. Press for 3s to start or stop the auto lid open/close function.
Recommended mode| Press the recommended mode to use the preset setting.
User mode| Press the user button for 2 seconds to memorize the current water temperature, air temperature, seat temperature, nozzle position and water pressure. Press the user button to use the memory setting.
ECO| Press the ECO button to start power-saving function (the buzzer rings once); press the button again to stop the power-saving function (the buzzer rings twice for a short time). The seat temp. will be 28℃ in the ECO mode.
Nozzle cleaning| Press the nozzle cleaning button, and the nozzle will come out. Then the cleaning hole will spray water to clean the nozzle for 10 seconds. Press stop button to stop it when it is running.

Massage laxative

| When the “rear wash” or “female wash” function is started, press the massage button to start or stop this massage function, and the water temperature changes alternately at 32-38 ℃.
Child wash| Press the Child Wash button in stop or other modes, it will start the washing function after a beep, and stop after 90 seconds. In the child wash mode, the water pressure is level 1, the position is level 3, the water temperature is level 1, and the seat ring is level 1 (People don’t have to sit on the toilet seat when use this function).
| When nobody is sitting on the toilet seat, press the deodorization button and the deodorization fan will run for 5 minutes.
Night ligh| Turn on or turn off the decorative light of the control knob.

Code matching

| Press and hold the “Female wash” button on remote control for 3 seconds, and the three indicators on the remote control will flash red. At the same time, the machine is powered on, and the buzzer will make a long beep to indicate that the code is successfully paired. Otherwise, repeat the above actions again.

Air Drying

| When the seat ring senses by its sensing are that someone is sitting, and press the Air Drying button in stop or other modes, it will start the drying function after a beep, and stop after 3 minutes. If the person leaves the seat ring during the function is running, the function will be stopped.
Recommended mode|

Press the recommended mode to use the preset setting.

Nozzle position

| Press the nozzle position button to move the nozzle forward in the “rear wash” and “female wash” modes.It has three levels from 1 to 3 indicated lights on. Each time you press it, the nozzle moves forward for one level, and then returns to the level after the level 3.| (Some models without this function)
---|---|---

Wind temperature

| Press the wind temperature button to change the air outlet temperature in the “air drying” mode. The outlet air temperature has 3 levels and stand-by mode. 3 level is the highest and stand-by mode means all the indicated lights are off.
Nozzle forward| Press this button in “Rear wash”“Female wash” mode, the nozzle will move forward by one level, up to three levels.
Nozzle backward| Press this button in “Rear wash”“Female wash” mode, the nozzle will move backward by one level, up to three levels.

How to use the control remote
The function of the remote controller shall be subject to the actual object.

The function of the remote controller shall be subject to the actual object.

Function description

(Some models without this function)

Cleaning procedure

Product Cleaning

Nozzle Cleaning
Press the “nozzle cleaning” button on the panel of the remote control, and the nozzle will automatically come out to facilitate the user to clean. Use a soft cloth or soft-bristled toothbrush to dip into the kitchen and wipe the nozzle with detergent. You can also remove the nozzle for cleaning. The method is holding the spray lance in one hand (not shaking) and pull out the spray nozzle with the other hand, and the spray nozzle will be taken out. After cleaning, it can be installed back. Finally, press the “stop” button, and the spray lance will return automatically.
Power cut
Unplug the power plug before cleaning the product body.
Clean the external parts of the product
Clean the product with a soft cloth and neutral detergent. Do not use hydrogen chloride cleaner, thinner, benzene, sandpaper, polishing machine, perfume and insecticide and other cleaning products.
Clean the filter screen
When users feel that the water flow is less than normal during use, they can clean both ends of the filter screen with a brush. The product must be completely separated from the water supply hose during cleaning. If the product is connected to an external filter, please replace it regularly according to the water quality.

Not in use for a long time

Drain and cut off the power supply

Pull the plug out.
Close the valve and stop supplying water to the system. Remove the water inlet hose from the water inlet valve and drain the water in the hose.
Press and hold the push rod in the direction of arrow 1,and then horizontally remove the toilet in the opposite direction of the water tank (arrow 2).

CAUTION
When using the product again, please confirm and test run (refer to the part Product Installation).

Quick judgment and maintenance for the troubles

If you think there is a fault, please read the following items first and take measures. If the fault cannot be solved, please contact the purchase place, exclusive store or our customer service center.
Please unplug the power cord before maintenance.

CAUTION
When the power cord is damaged, it shall be replaced by the manufacturer, after-sales service center or professional personnel (with qualification certificate) to avoid safety accidents.
In case of water leakage, first rotate the handle of the inlet valve clockwise, close the valve and stop water supply.

Please confirm the following precautions before maintenance

Fault Problem	Checking	Solution

Power

Function non-responding

| ● Is there power outrage? Is there power in the power socket?

● Is the main power turned on?

| ● Please wait until power is restored. Please turn on the power socket.

● Please turn on the main power.

Rear wash/Female wash/Pulse wash

No water

| ● Is water cut off?

● Is water valve closed?

● Did you not touch the sensing area?

| ● Please wait for water.

● Please open the water valve.

● Please sit on the sensing area.

Water pressure is decreasing

| ● Is the warm water switch off or the water temperature setting is low?

● Is the filter or external filter clogged?

| ● Turn up the water pressure by control knob or remote control.

● Clean the filter; Change the external filter regularly

Water temperature is low

| ● Is the warm water switch off or the water temperature setting is low?| ● Adjust the water temperature by control button or remote control

Stop spraying water after 90s of washing

|

● Just a setting. Not a fault problem

| ● Use the washing functions again
Fault Problem| Checking| Solution
---|---|---
Water stop during washing| ● Probably that the human body doesn’t touch the sensing area of the seat ring| Adjust sitting position to make suresitting on the sensing area

Seated sensing are of the sear ring

It activates the washing or deodorizing function without being seated.|

● Is the seat be splashed with water or has a wet towel on it?

| ● Please wipe the water off with dry towel;

● Please take the wet towel away.

Auto flush function

Auto flush is not activated| ● Auto flush module not installed or not installed correctly;

● Some models doesn’t have this function.

| ● Please install the auto flush module according to the instruction above.

Seat heating

Seat temperature is low

| ● Is the warm seat switch off or the seat temperature setting is low?

● Is it in ECO mode?

| ● Adjust the water temperature by control button or remote control;

● Please wait for 5 mins after seated.

Or turn off ECO mode.

ECO function

ECO function is not activated

| ● Is power outrage or the power cord be unplugged?

● Is the battery on the remote control depleted?

| ● Press the ECO button on the remote control for activating the function

● Replacement battery.

Remote control

Remote control not responding

| ● Is the battery on the remote control depleted?

● Is the battery installed incorrectly?

● Probably that the human body doesn’t touch the sensing area of the seat ring?

| ● Replacement battery.

● Please install the battery correctly.

● Adjust sitting position to make sure sitting on the sensing area.

Fault Problem	Checking	Solution

Deodorization
Deodorization is not activated| ● Probably that the human body doesn’t touch the sensing area of the seat ring.| ● Adjust sitting position to make sure sitting on the sensing area.
Warm air drying
Air temperature is low| ● Is the air temp. setting low?| ● Adjust the air temp. by remote control.

Function stops during drying

| ● Normally it stops after 3 mins of drying| ● Use this function again.

● Adjust sitting position to make sure sitting on the sensing area

Air drying is not activated| ● Probably that the human body doesn’t touch the sensing area of the seat ring| ● Adjust sitting position to make sure sitting on the sensing area
Others

Dirt not cleaned

| ● Is the water valve fully open?

● Is the water valve filter blocked?

● Water pressure too low when sharing water with bathroom.

| ● Open the water valve

● Clean the filter

Water is dirty| ● The external filter is used over 6 months.| ● Replace a new filter
Water pipe connection leaking| ● Is the nut of the connecting pipe not tightened?| ● Tighten it
If there is any abnormal situation other than the above table, please contact the seller.

Knob Light

Troubleshooting

WARNING

Do not disassemble, repair or refit the product by yourself.
May cause electric shock, fire or failure.

Technical parameters

Model Technical parameters| WLG3-505V-US WLG3-505D-US WLJG3-505V-US WLJG3 -505D-US| WLG4-505V-US WLG4-505D-US WLJG4-505V-US WLJG4-505D-US
---|---|---
Rated power| 120V~ 60Hz

Rated power

| 1220W (The inlet water temperature is 15 ℃, the outlet water temperature is at the maximum level, the water pressure is 0.2MPa, the water pressure is at the maximum level, and 30 seconds before the Rear wash operation).
Power line length| 1.2m
Warm water heating mode| Instant heating
Water temperature| The temperature adjustment range is about 30 ℃ ~ 39 ℃

Safety device

| Flow monitoring sensor, water temperature sensor, bimeta temperature control switch, temperature fuse.

Wind temperature

Product weight

|

WLG3-505V-US WLG3-505D-US

|

4.3kg

|

WLG4-505V-US WLG4-505D-US

|

4.5kg

WLJG3-505V-US WLJG3-505D-US

|

3.8kg

|

WLJG4-505V-US WLJG4-505D-US

|

4.0kg

The bar codes on our products and outer boxes are only for internal use, not for other purposes. Zhongshan Donlim Weili Cleaning Technology Co.,Ltd. reserves the right of final interpretation of this manual. We reserve the right to change specifications without prior notice.

Service/maintenance guide

Before requiring maintenance, please confirm the items of “when considered to be faulty”.

Warranty service card
- This manual is attached with warranty service card. Relevant information must be filled in when purchasing. Keep them properly when they are confirmed to be correct.
- The warranty period is 1 year from the date of installation.
Market supply period of spare parts for maintenance.
- The market supply period of spare parts for maintenance is 5 years from the date of production.
When maintenance is required during the warranty period.
- After reading the manual again and confirming that the product is still abnormal, please contact the customer service center for maintenance.
- Warranty shall be provided when maintenance is required.
Contents to be provided during liaison.
- Address, name and telephone number
- Maintenance convenience date
- Name of a part
- Number
- Installation date
For products beyond the maintenance period, when maintenance is required.
- Please negotiate with the buyer first

After maintenance or normal use, the products will be repaired at a charge according to the requirements of customers.

It is advisable to regularly check (charge).
In order to use the products more safely, longer and faster, the company recommends that the products installed for more than 3 years should be inspected regularly.

The maintenance cost is obvious (When maintenance is required).
The maintenance fee consists of [technology fee], [accessories fee] and [visiting fee]. [Technical fee] refers to the cost of checking faults, repairing and replacing accessories and checking after repair.[Accessories cost] refers to the cost of accessories used in maintenance. [Visiting fee] refers to the cost incurred by technicians to and from the location of the fault.

Warranty service card

Product name| | Product model|
---|---|---|---
Manufacturing No.| | Purchase Date|
Seller| | Telephone|
Province City Dealer (affix one’s seal)
Product warranty instructions

1. Warranty certificate: the formal invoice and Three Guarantees certificate of purchase are the warranty certificates that you enjoy the national “Three Guarantees” and the company’s standard services. Please keep them properly. When you need services, please take the initiative to show them to the service organization certified by the company.

2. The warranty period is 1 year. 3. Warranty ordinance

-In case of failure after normal use according to the instructions, free warranty can be carried

out within the warranty period.

-The warranty parts only refer to the parts configured when the company’s temperature regulating and heating toilet cover leaves the factory.

-To the extent permitted by law, the company can choose to provide you with the promised warranty service by means of repair, replacement and return.

-Any organization or personnel is outside the service commitment. Let you buy other products

and their affiliated software, and make any additional commitments to you and the company will not be responsible.

-The company does not bear the cost and risk of customers taking and delivering products.

-If you use the product beyond the warranty period, the company will provide paid services in accordance with the charging standard for paid services.

-Although it is within the warranty period, the following situations need to be repaired at a charge. a.Faults and damages due to careless use, customers’ negligent operation and failure to repair or

transform in authorized service and maintenance institutions.

b.Failure or damage caused by fire, earthquake, flood, lightning and other natural disasters. c.Install additional products or parts to the product according to the user’s requirements, resulting

in the failure or damage of the product.

d.Failure or damage of this product caused by places other than ordinary homes (such as public places).

e.Failure or damage due to the use of non specified power supply (voltage, frequency).

Customer keep it as a precaution.

Maintenance record

Repair date	Maintenance record

Warranty card

Product name| | Product model|
---|---|---|---
Manufacturing No.| | Purchase Date|
Seller| | Contact Number|
Customer Name|
Customer address|
Dealer| (affix one’s seal)

FCC WARNING
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

this device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.

Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.

Caution : Changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.

Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Zhongshan Donlim Weili Cleaning Technology Co.,Ltd No.30, Dongfu Road, Niujiao Village, Fusha Town, Zhongshan City, Guangdong Province, China