DAYMAK Boomerbeast Deluxe and Ultimate 3 Wheel Recreational Scooter User Manual

DAYMAK Boomerbeast Deluxe and Ultimate 3 Wheel Recreational Scooter

Product Information

Specifications

• Product Name: Boomerbeast Deluxe and Ultimate
• Manufacturer: Daymak

Product Usage Instructions

Mounting your tablet
The Boomerbeast comes with a tablet mount that allows you to attach a tablet for speed, distance traveled, and performance configuration. Follow these steps:

1. Take Piece A and put it around the handlebar.
2. Take Piece B and put it through the screws and hold it in place where you want the tablet to rest.
3. Screw each piece from Piece C tightly to lock the tablet holder in place.
4. Take Piece D and align the four holes to match the four pegs from Piece B. Once aligned, push either up or down until it clicks into place.
5. Adjust the tablet width to the desired size and flip down the lever on the back to lock it into place.
6. Slide in the tablet and you are ready to go!

On the right side of the handlebar, you will find a tablet charging port with a rubber cover. Use this port to charge your tablet. Please note that the Boomerbeast must be in the ON position and the charger port must be set to 1. To disable power to the charging port, set it to 0.

Connecting your Tablet to your Unit
Connecting via Bluetooth:

1. Turn on your tablet using the single button on the right-hand side and hold it for 3 seconds.
2. Once turned on, click on the Daymak Drive Bluetooth App.
3. The Boomerbeast can be connected via Bluetooth to increase torque range and more.
4. Once the app is open, it will show you a list of nearby Bluetooth devices as well as the front and rear motor. Connect to the motor.
5. The first time you connect, it will require you to input a password: 12345678.
6. Please note that to connect to the unit, the Boomerbeast must be set to the ON position.
7. A speedometer will appear once connected, and you are ready to go!

For more information on the Daymak Drive App, please refer to the quick guide seen here: http://daymak.com/manuals/Daymak%20Drive%20Manual.pdf
Please note that the Boomerbeast Ultimate has two controllers, so any changes made will only affect one motor.

Driving your unit
Once your Boomerbeast is set up and connected, follow these instructions:

Right Handlebar:

1. Throttle: Turn this toward you to engage the motor and propel the unit forward. Start slowly until you get a feel for its speed.
2. Lights: Set this into one of three positions:
   • Rightmost position: All lights are off.
   • Middle position: Rear running lights are on.
   • Leftmost position: All lights are on.
3. Reverse Switch: Hold this button down while turning the throttle to go in reverse.

FAQ

• Q: How do I mount a tablet on my Boomerbeast scooter?
  A: Follow the steps outlined in the “Mounting your tablet” section of the user manual.

• Q: How do I connect my tablet to the Boomerbeast via Bluetooth?
  A: Follow the steps outlined in the “Connecting your Tablet to your Unit” section of the user manual.

• Q: How do I drive my Boomerbeast scooter?
  A: Follow the instructions provided in the “Driving your unit” section of the user manual.

About Daymak

• Daymak is one of Canada’s largest Alternative Vehicle providers. We design, engineer, manufacture, import and repair everything from recreational dirt scooters, go-karts, and electric golf cars to alternative transportation solutions such as e-scooters and gas scooters.
• Our electric scooters represent an energy-efficient and eco-friendly alternative for people who need to get around the city. They greatly increase the practicality of scooter transportation in urban centers. Costing only a few cents to charge, an e-scooter can make city life more convenient and much less expensive.
• While many new Green technologies are still in their infancy, electric scooters have been developing over the last 40 years or more. E-scooter technology has been dramatically refined since the introduction of the first custom conversion scooters. Today, electric scooters are a supremely reliable and affordable means of transportation.
• Daymak is constantly developing new eco-friendly alternative transportation strategies, led by its own Research and Development department in Toronto, Canada. We are always improving our products. Our innovative in-house engineering and quality testing provide customers with many new kinds of reliable, eco-friendly vehicles, designed to help change the lives of our customers and the world.
• Daymak warranties, services, and stocks parts for everything it sells. We support our products.
• Please feel free to visit our website. You’ll find the latest in cool transportation solutions, support for the products you’ve purchased, and contact information.

Safety

• When operating the Boomerbeast please make sure you adhere to the following: Always check your mirrors and blind spots when operating through trails.
• Turn on headlights when in need of additional visibility.
• Make sure that your battery power is sufficient before you go out to ride
• Do not ride with more than 1 passenger
• Do not overcharge the battery by leaving the charger in the charging port. Once the battery is fully charged remove the charger immediately.
• Do not try to operate the unit while charging.
• Do not let anyone under the age of 16 years old operate this vehicle.
• Do not operate this unit up extreme inclines to avoid tipping.
• Do not make sharp/abrupt turns at high speeds to avoid tipping.
• Do not operate under the influence of any use of drugs or alcohol
• Do not operate on public roads
• Do not operate at excessive speeds.
• Do not completely submerge the unit in water

**Scooter Part Diagrams

**

Diagram 1: The Boomerbeast Electric Scooter

1. Controller
2. Throttle
3. Tablet Charging Port
4. Tablet / Mount
5. Ignition
6. Mirrors
7. Seat
8. Rack
9. Tires
10. Ball Hitch
11. Motor (rear)
12. Battery
13. Charging Port
14. Motor (front) [Ultimate Only]
15. Shocks
16. Turn Signals
17. Headlights
18. Brakes

Boomer Beast Operation

Mounting your tablet
The Boomerbeast comes with a tablet mount that allows you to attach a tablet that gives you speed, and distance traveled and allows you to configure the performance in front of you.
The Mounting brackets come with 4 pieces.

Instructions

• To start take Piece A and put it around the handlebar as seen here:
• Take Piece B and put it through the screws and hold it in place where you want the table to rest.
• Take the two pieces from Piece C and screw each one on the screws tightly to lock the tablet holder in place.
• Take Piece D, and align the four holes to match the four pegs from Piece B. Once they are in, push either up or down (depending on where you mounted it) until it clicks into place. Adjust the tablet width to the size you need and flip down the lever on the back to lock that into place.
• Slide in the tablet and you are ready to go!
• On the right side of the handlebar, you will find a tablet charging port with a rubber cover. Use this to charge your tablet.
  Please Note The Boomerbeast must be in the ON position and the charger port must be set to 1. To disable power to the charging port set this to 0

Turning on your unit
Ignition – The Boomerbeast comes with an ignition that you must put your key into to turn it on.

1. Wheel Lock – To put it into position 1 put the key into the ignition slot and turn left as far as you can go. Once you cannot turn anymore, turn the handlebars of the Beast to the left, then push the key further into the ignition and turn to the left again. Once in this position, your tire will be locked perpendicular to the bike making it harder to steal. Reverse this process to release the wheel lock
2. OFF – Put the key into this position to turn off the unit.
3. ON – Put the key into this position to turn on the unit.

Please note The unit does not need to have the Tablet on for it to be running, so do not leave the Boomerbeast unattended for risk of injury.

Connecting your Tablet to your Unit

Connecting via Bluetooth
Turn on your tablet with the single button on the right-hand side and hold it for 3 seconds. Once it has turned on click on the Daymak Drive Bluetooth App.

• The Boomerbeast can be connected to via Bluetooth to increase torque range and more.

• Once the App is open, it will show you a list of the nearby Bluetooth devices as well as the Front and rear motors. Connect to the motor. The first time you connect, it will require you to input a password: 12345678.
  Please note To connect to the unit the Boomerbeast must be set to the ON position (see Turning on your unit)

• Once you have done that, a speedometer will show up and you are ready to go!

• For more information on the Daymak Drive App, please refer to the quick guide seen here: http://daymak.com/manuals/Daymak%20Drive%20Manual.pdf

Please note the Boomerbeast Beast Ultimate has two controllers, so any changes to affect one motor, will not affect the other.

Driving your unit
Once you have your Boomerbeast set up and connected. It’s time to ride!

Right Handlebar

1. Throttle – Turn this toward you to engage the motor and to propel the unit forward. Do this very slowly at first until you get the feel of how quickly it goes.
   Lights – Set this into one of 3 positions
   Rightmost position – All lights are off
   Middle position – Rear running lights are on
   Leftmost position – All lights are on

2. Reverse Switch – Hold this button down while turning the throttle to go into reverse

Left Handlebar

1. Motor Power – Choose from the rear-wheel drive or Wheeled Drive. Set it to 1 For just rear wheels, and set it to 2 for all wheels. (Ultimate only)
2. Turn Signals – Slide this switch to the right when signaling to turn right. And left when signaling to turn left. Press the white button in the middle once the turn is complete.
3. Horn – Press this button to activate the horn.

Brakes

• On both sides of the handlebar, there are brake levers as seen on the right. To engage the brakes, pull the brake lever towards you.
• The right brake lever activates the front brakes
• The left brake lever activates the rear brakes

Brake lock

• To engage the brake lock, first, pull the brake lever towards you as you would normally engage the brakes.
• Then push the knob seen here behind the brake lever. To release it pull the small latch that surrounds the button back and pull the brake lever again to its normal position

The Battery

• The Boomerbeast Deluxe / Ultimate comes with a solar-powered lithium-ion battery case. This allows the unit to trickle charge the bike while it is out in the sun for additional range and battery longevity.
• To take it out of the battery, on the right-hand side, there is a lock in which you can put your key into. Turn the key and release the frame top of the frame that keeps it in place.
• Unplug all connecting wires to the battery and then lift it up by the handles on each side.

The Boomerbeast battey can function completly on its own whether you want to use it as a power bank or charge it in or outside of your home.

1. External Charging Port – This is the charging port if you want to charge the battery outside of this unit. Plug the charger directly into this spot. Please see below for charging instructions. Please note 6) Power setting must be set to 1 for this to work
2. Power connection port – Connect this to the unit to give power to your Boomer-beast
3. USB power port – Connect USB devices here to power them Please note 6) Power setting must be set to 2 for this to work
4. 110V Outlet – Connect regular 110V devices here to power them Please note 6) Power setting must be set to 2 for this to work
5. Handle – Raise this handle to easily lift the battery pack. There is one on each side for easier maneuvering.
6. Power Setting – Set this to 0 for no power input or output. Set it to 1 to allow
   it to be charged (power input). Set this to 2 to give power to other devices (power output). Please note These settings are irrelevant when the Power connection port is connected

The Battery

Charging Your Unit
If you are charging the Boomerbeast directly in the frame there is a chargeport to the left near the front of the unit that is covered by a plastic flap.

• To begin charging, take the charger and plug it into a 110V wall outlet. Once it has been plugged in, the light will turn green to show that the charger is on. Take the other end and plug it into the Boomerbeast as seen on the right and the charger will turn red.
• When charging the unit directly to the battery, use the following procedures as illustrated however make sure the Power Setting on the battery is set to 1 (see previous section)
• Once it is completely done charging the charger will turn green again. Once it has turned green unplug the unit as soon as possible.
• If the unit has been charging for over 12 hours and the light still hasn’t turned green unplug it and plug it back in to see if it stays green. If it does it’s done charging.
• Do not overcharge the battery, leaving the charger in the unit can severe damage to the battery, the unit, and the surroundings.

The Controller

Daymak Drive Bluetooth Controller
The Daymak Drive controller is what makes the unit do what it does when a function is pressed or a switch is switched.

• This controller is located underneath the seat covered by a black panel. This should not be tampered with by consumers. If you have any issues with your controller please see a licensed Daymak dealer for support.
  Please note On the Ultimate version, there are two controllers.

Mirrors

• The Boomerbeast comes with a set of mirrors that screw on each handlebar. Screw each mirror into the appropriate side (left mirror on the left side etc). Until it is loosely in the position you want. Then take a wrench and tighten the bolt at the bottom of the mirrors to make it stick in that position.

Ball joint Hitch

• The Boomerbeast comes with a ball joint hitch so that you can tow a wagon or whatever you need to behind your unit.

Rear Rack

• The Boomerbeast comes with a rack for additional storage room.

The Seat

King Seat
The Boomerbeast comes with an adjustable King seat with armrests.

1. Arm Rests – Raise these up or down as you see fit. Set it, however, makes you the most comfortable.
2. Back Rest Angle – Pull this lever up and push the backrest of your chair to set it to the angle that is most comfortable for you.
3. Seat Position – Pull this lever up and slide the seat either forward or backward to pull the seat closer or further from the handlebars.

Maintenance

• Always ensure that your tire pressure is to the recommended value of your unit. You can find the PSI value on the side of each tire.
• Check your brakes before you ride, make sure they are firm and the unit does not move while they are being pulled.
• Check that all lights are working, headlights brake lights, and signal lights.
• When storing it outside, use a cover to prevent weather damage to the unit. If possible bring the whole unit inside. Otherwise if possible bring the battery inside.
• Bring your unit to your local Daymak dealer for a yearly check-up if possible.
• Do not overcharge the battery, once the battery is fully charged unplug it as soon as possible.

Tips and Tricks

• Whenever you get out of your vehicle, always put your brake lock on. This will prevent it from rolling away downhill, and will also stop someone from accidentally engaging the motor while off the vehicle.
• If possible leave the lights on, if your lights are on, whether the tablet is connected or not, if the ignition is turned on you will know because the lights are also on.
• You don’t need to use the tablet provided, but you can connect with your smartphone! Download the app from the Apple App Store, or the Google Play store, and connect directly to your phone.
• When engaging the throttle always start slowly to get a feel of how quickly the unit may move.
• When braking, use your rear brakes first, and then your front brakes for the safest stopping.
• An additional lock is advised when leaving it outside for extended periods, secure a safe lock to the frame to prevent theft.

Thank you for choosing Daymak

References

• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>