rabbitgoo Large Dog No Pull Pet Harness Instruction Manual
- June 17, 2024
- rabbitgoo
Table of Contents
rabbitgoo Large Dog No Pull Pet Harness
rabbitgoo No Pull Dog Harness
Measure Your Dog
If the harness does not fit your dog: Please firstly refer to the size chart on the website to see if you have chosen the right size. Please adjust the harness according to the user manual and the instruction video on the website. If you have any problems with the adjustment, please feel free to contact us, and we are always happy to help. A This harness is not chew-proof: If your dog tends to bite or chew on things, please keep the harness away from him/her when not in use.
Care Instruction: Hand wash with mild soap or neutral detergent. Not machine washable. Please allow the harness to air dry completely if it gets wet or is washed.
- Al got a wrong size
- I don’t like the color
- Al got a wrong item
I What do I do?
If the harness is in its original condition (i.e., without any signs of use or
damage): You can return or exchange the item via Amazon within 30 days of
delivery for a full refund. To initiate a return or exchange, please visit
www.amazon.com/returns and follow the
instructions.
If the harness isn’t in its original condition: No worries! Just contact us
anytime for quick and complete after-sales service. You may reach us via:
Email: [email protected]
[email protected] (for EU & UK customers)
Facebook:rabbitgoostore
Website: www.rabbitgoo.com
How to put on the Harness.
Step 1: Unsnap both buckles and loosen the straps. We recommend you first loosen all the straps, and then adjust and tighten them after putting the harness on your dog.
Step 2: Put on the harness. Slide the neck piece through your dog’s head.
The logo “rabbitgoo” should be up on your dog’s back.
Step 3: Arrange straps and buckle up on both sides. Arrange the bottom
straps between your dog’s two front legs, under the belly. After properly
positioning the harness on your dog’s body, clasp the straps using the two
side buckles. Be sure to buckle both sides up.
Step 4: Adjust neck and chest straps. Adjust the chest straps to ensure
that the harness is secure, but not too tight. You can slide the adjuster and
pull or push the strap through the adjuster to create a good fit.
Step 5: Secure the straps properly. Be sure the upper and lower straps
are paralleled after adjustment.
Step 6: Check for the 2-finger rule. Check the fitting using the 2-Finger
Rule: You should be able to fit two fingers between the harness and any part
of your dog’s body, so the harness fits snugly without restricting your dog’s
movement.