DRIFT HD720 Professional HD Action Camera User Manual

June 17, 2024
DRIFT

DRIFT Logo DRIFCHD 720
Professional HD Action Camera
+ LCD Screen & Remote Control

DRIFT HD720 Professional HD Action Camera

About Your camera

DRIFT HD720 Professional HD Action Camera - rear Hathc

A Rear Hatch
B 15° LCD Screen
C Up Button
D Menu Button
E Down Button
F Select Button
(On/Off/Rec/Stop) with LED
G Rotating Camera Lens
ContentsDRIFT HD720 Professional HD Action Camera - rear Hathc -
Fig

Drift HD720
Remote Control
USB Cable
Rechargeable Battery
Universal Clip
Flat Surface Mount
Curved Surface Mount
Gogale Mount

getting started

  1. Open and remove the rear hatch
  2. Insert a formatted Micro SD card into the slot
  3. Slide the battery into the slot. as shown
  4. Charge the battery for 2 hours before first use
  5. Replace and close the rear hatch

DRIFT HD720 Professional HD Action Camera - rear Hathc -
Powering

powering up and down

  1. Press the Select Button to tum the camera on
  2. The LED will light up green, indicating the unit is powered on
  3. You are ready to record video or take pictures
  4. To powcr down, press and hold the Select Button for 3 seconds

basic menu settings

  1. Press the MENU Button
  2. The LCD will show the menu options
  3. Scroll through the options
  4. Use the SELECT Button to choose the one you want
  5. Press the MENU Button to exit a menu setting or option

A Photo viewing mode
B Video playback mode
C MENU button
D SELECT button
E Video configuration menu
F Setup menu

videos and photos

You capture a video or take a photo depending on the camera settings. You can use either the camera or remote control to do so.
To start recording or to take a photo:
Press the Select Button on the camera or the Record Button on the remote control

mounting the camera

DRIFT HD720 Professional HD Action Camera - rear Hathc - Camera
-

  1. Firmly attach the camera to the desired mount
  2. Align the lens of the camera, gently twisting it to suit your mounting option
  3. Notice that the indicated mark on the lens must be always pointing up, independent of the mount used

Specifications

Video resolution: 720p and SD
Video format: 16:9
File format: .MOV (H.264 codec)
Sensor type: CMOS
FPS: 720p – 25/30 fps
Recording angle: SD – 25/30/50/60 fps
Lens rotation: 720p and SD – 130°
Lens focal range: 300°
Zoom: 0.5m to infinity
Photo mode: x4 (digital)
LCD Screen: 5 megapixels
Remote range: 1.5° colour TFT
Radio frequency: 3m (9.84ft)
Built-in memory: 433.92MHz ISM band
Memory capacity: 32MB

Micro SD memory cards up to 32GB
Exposure:
Auto / Manual (advanced users)
Connectivity”
USB Ptug & Play, mini-B US8 connector
Compatibility:
Windows XP & up / Mac OS 10.2 & up
Camera:
106 {UL} x 55 (W) x 38 (D} mm / 145g
1110mAh rechargeable lithium-ion battery (inctuded); DC 37V
Remote control:-
52 (L) x 40 (W) x 13 (D) mrn / 19g DC 3V (1xCR2032 battery inctuded Built-in microphone Water resistant

Disclosures

FCC Information
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this device may not cause harmtul interference, and (2) this dewce must accept interference received, including interference that may cause undesired operation.
WARNING
Changes or modifications to this unit not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment.
NOTE
The equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses. and can radiate radio frequency energy and. if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by powering the equipment on and off, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna:
  • Increase the separation between the equipment and the receiver:
  • Connect the equipment into an outlet on a circuit different from that which the receiver is connected:
  • Consult the dealer or an experienced radio / TV technician for help.

CAUTION

Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. 3.7V1110mAh Li-ion battery.
Do not dispose of electrical products in the general waste and ensure the used product or batteries are disposed safely according to your local authority and regulations.

Thank you for purchasing the Drift HD
We are confident you will have great fun with your camera .

CUSTOMER SUPPORT
Check our official website for firmware updates, customer support, news about our products and videos from our users.
If you have any suggestions, comments or problems, please contact our customer support team at support@driftinnovation.com
WARRANTY
To obtain our warranty service, register your product at www.driftinnovation.com

| www.facebook.com/driftinnovation
---|---
| www.twitter.com/driftinnovation
| www.vimeo.com/driftinnovation
| www.flickr.com/driftinnovation

DRIFT Logo

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals