DRIFT Innovation X5 4K Wearable Waterproof Camera Head Mounted User Guide

DRIFT Innovation X5 4K Wearable Waterproof Camera Head Mounted User Guide

CUSTOMER SUPPORT

Download the full manual and check our official

website for firmware updates, customer support,

and info on all of our products. https://driftinnovation.com/

If you have any suggestions, comments or concerns; please contact our customer support team atsupport@driftinnovation.com

WARRANTY

Warranty does not apply if the product is damaged due to physical abuse, mishandling, accident, fire, frostbite, water damage, negligence or failure to follow the supplied operating instructions. For more information on warranty, see: https://driftinnovation.com/warranty.

DIRECTORY

SPECIFICATION PACKAGE CONTENTS ABOUT YOUR DEVICE INITIAL  SETUP QUICK    GUIDE MODE NAVIGATION GENERAL SETTINGS APP/ UPDATE FEATURE OVERVIEW CONNECT YOUR X5 DISCLOSURES

SPECIFICATION

Voice Control                Supported
Video Anti-Vibration Supported
Video Format

PACKAGE CONTENTS

A X5
B Head strap
C   TRS-Audio Adaptor Cable
TRS-Power Cable

ABOUT YOUR DEVICE

INITIAL SETUP

1. Open the Memory Card and USB door.
2. Insert a Class 10 or higher microSD/HC/XC card(up to 256GB). Format before first usage!
3. Connect X5 via a Type-C USB cable to a  powered USB port and charge the battery for 2.5 hours before first use.
4. Close the USB door and ensure that the latc is secured. You are ready to go!

QUICK GUIDE

POWER ON/OFF

1. Press and hold the button to power on.

2. The LCD Screen will power on, showing thewelcome display.

3. .X5 is now ready to record video or take photos using the Action button or voice commands.

4. .The mode is indicated by the color of the
   Status LED and LCD Screen, along with the icon in the top left of the Screen.

5. .To power off, press and hold the button for 3 seconds

Status LED Indication

RESET YOUR DEVICE

If the X5 becomes unresponsive, press the and at the same time to reset

it.

VOICE COMMANDS LIST

Note: for every voice command, please use “Drift” as the wakeup command, wait until you hear the X5 respond “Hi”, then speak the command phrase to trigger the action from your X5.

MODE NAVIGATION

To change the current mode, press the button to cycle through Video, Photo and General Settings.

VIDEO MODE

(Green LED) Press the  button to start recording. The Status LED and LCD backlight will flash red to indicate recording. Press the
button again to stop recording.
Video Settings
Resolution
Frame Rate Press the button to highlight resolution o frame rate, press to cycle through the options .

PHOTO MODE

Resolution
Press the button to move highlight block to the resolution setting, press to scroll through the available resolutions.

GENERAL SETTINGS

(Blue LED) Press the button to scroll dow through the available settings, or press and hold the button to scroll up through the menu. Press to cycle through the options of a highlighted setting.

Settings Menu

Wi-Fi

Wi-Fi  Frequency BT           Mode Pair   Remote Voice Control Video Stabilization Field Of View Exposure

Self-Timer Bit Rae Filters ISO

Mic Sensitivities

On/Off

2.4/5.8 GHz

On/Off Paired/Unpaired On/Off

On/Off 140/115/90

+ 2 / + 1/0 / -1 / -2

Off/3s/5s/10s High/Mid/Low Normal/Vivid/Low Light Auto/ 100/200 /400/800 Off/1/2/3/4/5

APP/ UPDATE

APP

Find the Drift See App for Android devices in Google Play, or the Apple Store for iOS devices. With Drift See, you can remotely preview, configure and access media files on your X5, or make a video call.

UPDATING YOUR X5

Download the latest firmware from the Drift website and copy the X5.bin file into the root of a formatted micro SD card. Insert the micro SD card into the X5 and power it on. The X5 screen will display the “Upgrading” icon when the firmware is installed. During the process the X5 will reboot 2 times.

FEATURE OVERVIEW

Register your X5

Launch the Drift See app on your mobile device, navigate to
[Device] page and click the [+] button on the upper right corner.
Enter the Wi-Fi name and password of the network you wish to connect to, and tap the OK button to generate a QR code.
Turn on your X5 and press and hold the button for 2s to set the device into Scanning QR code mode. Aim the lens at the QR code on your phone and once the QR code is recognized, the X5 will connect to the network and the App will automatically
return to the [Devices] page, which will show that your X5 is detected. Tap the Register button to complete the registration of the X5.

Video call

After your X5 is registered, navigate to the “Me” page in the
Drift See App, and tap the [+] button to add co-workers who you want to invite to your video call.
To start a video call, turn on your X5 and make sure it’s connected to the Internet, through either a Wi-Fi router or your phone’s hotspot. Use the voice command “Drift, Make a call”, and your co-workers will receive an SMS for the calling request,
prompting them to launch the Drift See app where they will see your X5 is online, on the homepage. Tap the X5 to join the call.

.Laser Light

The laser light allows the X5 user to quickly and easily check where the camera is pointing while wearing it. Simply use the voice command “Drift, Light Up”, and the Laser Light will be turned on. A red dot is visible in front of you, which points to the
center position of the picture or video you are taking. Use the\ voice command “Drift, Light Off”, to turn the laser light off.

.Video-Lapse Mode

Captures a fast-motion video, allowing you to share a condensed version of your recording. When enabled, video lapse mode will automatically stitch together a timelapse video and save it to your memory card, with no editing required. Simply turn on
Video-Lapse mode in the settings menu, select a Video-Lapse Interval, and navigate to Video mode, press button to start recording

Video Tagging

Video tagging mode can be enabled in the X5 settings menu.
When activated, this feature allows the X5 to continuously record video, but only save to the memory card when important footage is “Tagged” by pressing
A ‘Tagging Interval’ can be selected in the settings menu, and this will determine the duration of the videos recorded. For example, if a 30s interval is selected and the user presses th button the last 30s of video will be saved to the memory card.
The X5 will then continue to record for a further 30s, giving a total video duration of 1 min.
The Video Tagging feature requires a class 10 micro SD card with
4GB of free space to function correctly. Please note that video tagging mode cannot be enabled together with Loop Recording Mode.

Loop Recording Mode

Loop Recording Mode allows your X5 to record in a continuous
loop. This means that when the memory card becomes full, the
X5 will record over the oldest footage.
The interval setting is the duration of the loops that the X5 will record. For example, if you select a 2m interval and record for 20 minutes, you’ll find 10 videos saved on your memory card, each two minutes long.

Bit Rate

Users can choose to keep the normal compression used by the
H.264 codec, or if they prefer, allow a higher flow of data for preserving more of the original recording. This will result in a bigger file size.

Filter

Quickly tailor your X5’s settings to the recording conditions
with filters. Choose between Normal / Vivid / Low Light.

CONNECT YOUR X5

CONNECTING TO A PC

1.  Connect the X5 using the USB cable (provided); X5 screen will show a USB icon.
2.  X5’s folder may open automatically; if not, open using My Computer.
3.  X5 should be recognized as a removable disk; double-click to open.
4. Open the DCIM folder to access your files.

CONNECTING TO A MAC

1.  Connect the X5 using the USB cable (provided); the X5 screen will show a USB icon.
2. . X5’s folder may open automatically; if not, open using Finder.
3. . X5 should be recognized as an external device double-click to open.
4. . Open the DCIM folder to access your files.

DISCLOSURES

FCC Information
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept interference received including interference that may cause undesired operation.

WARNING

Changes or modifications to this unit not expressly approve by the party responsible for compliance could void the user’s authority to operate the equipment.
The equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can b determined by powering the equipment on and off, the user is encouraged to try to correct the interference by one or
more of the following measures: Reorient or relocate the receiving antenna;

Increase the separation between the equipment and the receiver;
Connect the equipment into an outlet on a circuit different from that which the receiver is connected;
Consult the dealer or an experienced radio / TV technician for help.
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.
This Class [B] digital apparatus complies with Canadian ICES-003.
Son fonctionnement est soumis aux deux conditions suivantes:
(1) cet appareil ne peut pas causer l’intervention, et
(2) cet appareil doit accepter de l’intervention, y compris l’ intervention qui peut causer l’opération non désirée de.
Cet appareil numérique de la classe [B] est conforme à la norme
NMB-003 du Canada.
Cet appareil s’accorde avec Industrie Canada licence-exempte RSS standard.

FCC RADIATION EXPOSURE

This equipment complies with FCC radiation exposure limits se forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-locatedor operating in conjunction with any other antenna or transmitter.

Read More About This Manual & Download PDF:

References

• Drift | No matter what moves you, capture it best with Drift – Drift Innovation
• Limited Product Statement Warranty – Drift Innovation

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>