BBTEK BADXl7bDUlM Eclipse Wireless Earbuds Instruction Manual
- June 17, 2024
- BBTEK
Table of Contents
BBTEK BADXl7bDUlM Eclipse Wireless Earbuds
Safety Instructions
- Keep earbuds and case away from extreme heat or humidity.
- Extreme temperatures can cause the device to deform, reduce the battery capacity, and shorten the lifespan of the device.
- Do not use the earbuds at a high volume for extended periods of time. To avoid hearing damage, use your earbuds at a comfortable and moderate volume level.
- Stop using this product immediately if it causes pain or discomfort.
- Do not submerge the earbuds or case in water.
- Keep earbuds, cases, and accessories out of reach of children and pets to avoid accidents.
- Do not disassemble or modify the earbuds or case for any reason.
- This may cause a malfunction or product failure. Please contact us at info@bb-tek.com for repairs.
What’s Included
Box Contents
How to Use
Connect your device
- Remove earbuds from the charging case by pulling the rubber tab on the outside of the case.
- Press and hold both L/R earbuds for 10 seconds. If the earbuds are charged, you will see a blinking blue and red light on the earbuds, indicating they are ready to be paired.
- Open the Bluetooth settings on the device you would like to connect your earbuds to.
- Find BBTEK TWS and select to connect.
If there is an issue connecting both earbuds to your phone or you canno search for the Bluetooth name:
- Place both earbuds back into the charging case.
- Delete the earbuds from the Bluetooth pairings on your device.
- Turn your device’s Bluetooth settings off.
- Turn your device’s Bluetooth settings back on.
- Reconnect your device to the earbuds following the connection instructions above.
Charge your device
- Place both earbuds inside the charging case.
- Close the charging case and connect the case to the included USB cable.
- Connect the USB cable to power. The earbuds and charging case will charge simultaneously.
For proper use, do not insert earbuds into the charging case if they are wet, damaged, or dirty.
While charging, the case and/or charger may become hot. This does not affect
the device’s lifespan or performance and is in the device’s normal range of
operation.
Do not disassemble, modify, or attempt to repair your device. Placing objects,
such as magnetic stripe cards, including credit cards, phone cards, passbooks,
and boarding passes, next to the device may cause damage to the device’s
magnetic field.
For additional video instructions, scan the QR code below or visit: https://bb-tek.com/products/eclipse-wireless-earbuds
Touch Controls
Function | What To Do | Voice Prompt | Light Activity |
---|---|---|---|
Power on | Press and hold L or R earbud for 1.5 seconds, or take the earbuds | ||
out of the case to turn on automatically. | Power on | Flashing red and blue |
lights
Power off| Press and hold L or R earbuds for 10 seconds, or place the earbuds
in the case and close to turn off automatically.| Power off| Flashing red
light for 1 second
Bluetooth pairing| While the earbuds are off, press and hold both L/R earbuds
for 10 seconds.| Pairing mode| Alternating red and blue lights
Incoming call
|
Answer or reject the call
|
Caller announced
|
Flashing blue lights
Answer call| Tap Lor R earbud twice| | LED off
Reject call| Press and hold L or R earbud| Call rejected| LED off
End call| Tap Lor R earbud twice| | LED off
Play/ pause| Tap Lor R earbud twice| | LED off
---|---|---|---
Next song| Press the button on the R
earbud 3 times
| | LED off
Previous song|
Press button on the L earbud 3 times
| | LED off
Volume up| Press button on the R
earbud
| | LED off
Volume down| Press button on the L earbud| | LED off
Virtual
assistant on
| Quickly tap Lor R
earbud 4 times
| |
Virtual
assistant off
| Quickly tap Lor R
earbud 4 times
| |
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>