ARCTIC APBL1 Plastic Polymer Based Pipe Repair Tool User Guide
- June 17, 2024
- Arctic
Table of Contents
ARCTIC APBL1 Plastic Polymer Based Pipe Repair Tool User Guide
- Make sure the AQUAPEA / meter entry point is accessible
- Quantify the leak
- If the leak is above 4 lpm you can enter the AQUAPEA
- Turn down the internal stop tap
- Unscrew the meter and non-return valve
- Enter the AQUAPEA
- Refit the meter and non-return valve
- Turn the water supply back on
- Monitor the meter at all times
- Once the AQUAPEA has fixed the leak leave the pressure on for 15 minutes
- Monitor the meter again and once satisfied open internal stop tap
- Normal operation can resume
HOW THE AQUAPEAR WORKS
DO NOT ENTER THE AQUAPEA UNDER 4 litres per minute (lpm)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>