ZKTeco RevFace15 Visible Light Facial Recognition Installation Guide

June 4, 2024
ZKTECO

ZKTeco RevFace15 Visible Light Facial Recognition

ZKTeco-RevFace15-Visible-Light-Facial-Recognition

INSTALLATION

Installation Requirements

ZKTeco-RevFace15-Visible-Light-Facial-Recognition-
fig-1

  • Installation Height: 1.Sm
    Height of the Face Adapted for

  • Detection: 1.2m to 2m

Installation environment:

Device Installation

Installing on the wall

  1. Place the mounting template sticker onto the wall, and drill holes according to the mounting paper.
  2. Fix the back plate onto the wall using wall mounting screws.
  3. Fix the device into back plate.
  4. Use the safety screw to fasten the device to the back plate. ZKTeco-RevFace15-Visible-Light-Facial-Recognition-fig-3
Power Connection

ZKTeco-RevFace15-Visible-Light-Facial-Recognition-
fig-4

  • Recommended AC adapter: 12V, 3A
  • To share the power with other devices, use an AC adapter with higher current ratings.
Port Introduction

ZKTeco-RevFace15-Visible-Light-Facial-Recognition-
fig-5

Printer Connection

ZKTeco-RevFace15-Visible-Light-Facial-Recognition-
fig-6

Wiegand Reader Connection
RS485 Connection ****
Door Sensor, Exit Button & Alarm Connection
Lock Relay Connection

The system supports both the Normally Opened Lock and the Normally Closed Lock. The NO Lock (normally open when powered) is connected with ‘NO’ and ‘COM’ terminals, and the NC Lock (normally close when powered) is connected with ‘NC’ and ‘COM’ terminals. The power can be shared with the lock or can be used separately for the lock, as shown in the example with NC Lock below:

  1. Device not sharing power with the lock
  2. Device sharing power with the lock
Ethernet Connection

Connect the device and the software over an Ethernet cable. An example is shown below: ZKTeco-RevFace15-Visible-Light-Facial-Recognition-
fig-11

Click [Comm.] > [Ethernet] > [IP Address], input the IP address and click [OK].
Note: In LAN, the IP addresses of the server (PC) and the device must be in the same network segment when connecting to ZKBioAccess IVS software.

Download Center

Use the mobile phone and scan the QR Code to download the User Manual, Installation Guide and Quick Start Guide.

ZKTeco Industrial Park, No. 32, Industrial Road, Tangxia Town, Dongguan, China.
Phone : +86 769 – 82109991
Fax : +86 755 – 89602394
www.zkteco.com 

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals