aubor OWS810 Open Ear Headphones Instruction Manual

aubor OWS810 Open Ear Headphones

How to connect

1. Please keep the distance between the open headset and the mobile phone (or other connected devices) within 1 meter, the closer the better;
2. Open the lid of the charging case, take out the L/R headphones and automatically pair, the pairing time is 3~5 seconds, prompt slow flashing, wait Connect open devices; If the pairing is not successful for 3 minutes, please turn off the computer.
3. Turn on the user’s mobile phone open function (or other open devices), search or scan, at this time the mobile phone will search for nearby open device, click on the searched headset name: A1, after successful connection, you can make a mobile phone call at this time, listen to songs;
4. After the phone and open are successfully connected, the device will automatically shut down after 3 minutes of disconnection from a distance; If the headset is not connected for 3 minutes, the headset will automatically shut down.

Quick Start Guide

Earphone operation mode

(power on and pairing)

Boot up| 1. Open the lid of the charging case, take out the L/R earbuds, and automatically turn on and pair automatically.

2. L/R ear press and hold for 3 seconds .

---|---
Shut down| 1. After the earphone L/R is placed in the charging case, it will automatically turn off.

2. L/R ear press and hold for 5 seconds and the device is invalid after connecting.

(call control)

(L/R) to touch area to reject incoming calls.
Voice assistants| Click on the right ear three times in a row

(playing music)

Charging instructions

1. When the charging compartment is low on power, the green light flashes, please charge it in time.
2. Connect one end of the USB charging cable to the Type-C charging input port of the charging compartment and the other end to the USB port of the power adapter. The orange light blinks when the charging compartment is charging, and the orange light is always on when it is fully charged.
3. When the left and right ear is low on battery, it will report a low battery tone. Please put the headset into the charging compartment and close the cover to charge. When charging the green light is always on, fully charged green light off.
4. When the headphone charging interface has foreign objects and poor contact, please use a cotton swab dipped in alcohol to gently wipe clean the headphone charging interface.

Wearing wireless headphones

1. Take out the headphones;
2. Wear it behind the ear;
3. Adjust the headphones to a comfortable position;
4. Headphones ready

Troubleshooting

1. Unable to boot.
   Determine whether the headset is fully charged, whether the button is misoperated, and then charge and activate.

2. Unable to connect to Bluetooth.
   Whether the headphone indicator is in the alternately flashing stage of red and blue

3. Can’t back to even.
   Make sure the front end (e.g., Bluetooth) is open properly.

4. Headphone volume is low.
   Whether the phone increases the volume, the phone needs to increase or decrease the volume. Wearing away Whether it is right.

Matters needing attention

1. Do not use violence against the product, do not use heavy objects to squeeze, away from high temperature and humidity environment.
2. Stay away from WIFI, router and other high-frequency transmitting equipment, which will affect the signal of the machine, Receiving, causing the sound to snap and break.
3. Please use the product in an effective environment (10 meters), and there is no space between the Bluetooth device and the headset, Have a physical barrier (e.g. wall, etc.)
4. If you do not intend to use this product for a long time, please store it in a dry environment and charge the headphones at least once a month to extend their lifespan and avoid extreme temperatures and dust.

Note : This product can be used in connection with any audio device with wireless function.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution : Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Portable

RF Exposure Information
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>