Hkleae YY001 Baby Bassinet User Guide

Hkleae YY001 Baby Bassinet

ACCESSORIES

SPECIAL STATEMENTS

The illustrations in this manual in order to indicate the operation method of the product and product structure, physical and figure. When there is a small difference between the actual object and the picture, please refer to the actual object.

Read all instructions before assembling and using the product.
And keep the instructions for a long time.

• Users and guardians should read this manual carefully before use and keep it for future reference. If not follow this manual may affect the safety of children!
• Keep away from fire or other strong heat sources.
• Check periodically during use, please do not use other band spare parts as replacement. please contact our after sales service if any replacements required.
• Do not use the bedside crib if any loose part or damaged joint is found.
• Please do not leave your baby unattended!
• Do not place this product near the window, as the curtain cord may entwine your baby!
• To avoid suffocation, keep the plastic bag or cover away from baby!
• The maximum load weight of the bedside crib is 6.8kg!
• Do not place items more than 3kg in the basket!
• The four brakes must be stepped on when the crib is used.
• Age of use: 0-5 months!

Open The Carton

Open the carton and take out

1. Bed frame
2. Bottom tube
3. Basket trusteeship
4. Wheels
5. Storage basket
6. Mosquito net
7. Fixing belt
   

Unfold The Bed Frame

1. Please turn the food tube in the bed frame to the outside.

2. Turn the foot tube to the point where it is vertically stand, as picture shown.

Open the carton

Wheel installation  : The four universal wheels on the side bed of the baby bed are inserted into the supporting feet to complete the installation .

Wheel disassembly : The four universal wheels on the side of the crib are drawn downward to disassemble the universal wheels.

Installing The Storage Basket

1. Two basket crossbars can be inserted into the basket.
2. As picture shown: Insert the baskets into foot tubes separately. A “click” sound indicating they are locked into place.

Install The Bottom Bracket

1. Place the two feet of the bottom bracket to the hole on the foot tubes, under the height adjustment rods. A “click” sound indicating they are locked into place.
2. After feet are installed, fix the buckles on the two sides to the middle rod.

Height Adjustment

1. Press the adjustment button and adjust height on 7 gear positions.
2. The number marking on the hole shows the gear position.

Cradle Mode

Pull d own t he four universal wheel-son the bedside crib then push them upwards, and the bedside crib switch to the cradle mode,

Detaching Fabric Cover

1. Detach the buckle on the zipper protector.
2. Remove the fabric cover by unzipping along the top edge of the bed frame.
   

The Brake Of  Bedside Crib

Step on the four brakes on the bedside crib .
The crib is on brakes.

Lift the brakes on the bedside crib.
The crib is on mobile postion.

WARNING The four brakes must be stepped on when the crib is used.

Attach To The Bed

Detach the side cover

1. Detach the buckle on the zipper protector.
2. Unzip the two zippers on two sides

Open the side frame

1. Press the two detach buttons under the side frame synchronously.

2. Lift the detached frame up and turn it downward.

3. After the side frame is turned down, please fasten the fixing belt and buckles on the bottom then finish.

4. Place the bedside crib in a suitable position next to the bed and step on the four wheels brakes.

5. Adjust the height to be level with the bed.

6. Take out the fixing belt.

7. There are two connecting buckles on the bottom frame of bedside crib. Please tie the bed with fixing belt and fasten the buckles and make sure they are secured.

Maintenance And Care

• Regularly inspect screws, rivets, screws, and other fasteners to ensure that they are strong and secure, and replace any parts that are in poor condition.
• It is very important to thoroughly clean and dry the bedside crib after using in winter, seaside, wild or rain condition.
• Uncleaned sea salt will erode the metal parts.
• It can be cleaned with clean water and then thoroughly dried after using in these environment condition.
• Do not use the bedside crib if any parts of the product are found to be damaged, please contact the after sales service immediately.
• Do not expose the bedside crib under strong sunlight too long, as exposure under UV light may cause colour fading the fabric even with normal use.
• Be careful not to tear the fabric during the handling of the crib bed.
• Low viscosity oils or lubricants can be used as lubricants on moving parts.
• Do not machine wash.
• Please clean with a sponge, neutral cleaner and warm water.

Read all instructions before assembling and using the product.
Assembly instructions that include:
Correct assembly of product.
Correct assembly and use of the attachment system. including graphics.
Correct conversion (when applicable) from one use mode to another.
List of all parts required for bedside sleeper mode andthe statement: “DO NOT use bedside sleeper if any parts arc missing. damaged. or broken. Contact (insert manufacturer? name) for replacement parts and instructional literature if needed. DO NOT substitute parts.”
Keep instructions for future use.
Always read and follow assembly instructions for each product use mode (bedside sleeper, bassinet, play yard).
Additional warning in the instructions shall address the following: Strings can cause strangulation! Do not place items with a string around a child’s neck, such as hood string or pacifier cords. Do not suspend strings over a bassinet of cradle or attach strings to toys.
The left and right gears can only differ by one gear at most. For example, 1 gear on the left and 2 gear on the right.

WARNING : Do not use this bassinet if you cannot exactly follow the accompanying instructions. Failure to follow these warnings and the instructions could result in serious injury or death.
FALL HAZARD : To help prevent falls, DO NOT use this product when the infant begins to push up on hands and knees or has reached manufacturer’s recommended maximum weight of 15 lbs.(6.8ka).whichever comes first

SUFFOCATION HAZARD INFANTS HAVESUFFOCATED:

• In gaps between extra padding and side of the bassinet and
• On soft bedding

Use only the pad provided by

MANUFACTURER that is no thicker than 11/2″ (3.5cm) and is of such a size that, when pushed against any side of the product it does not leave a gap of more than 1/4″(3 cm) between then mattress and sides.

NEVER add a pillow, comforter, or another matrass for padding.

WARNING :

If a sheet is used with the pad. use only the one provided by the bassinet or cradle manufacturer or one specifically designed to fit the dimension of the bassinet mattress.

To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their backs to sleep, unless otherwise advised by your physician.

Do not leave child unattended in the bassinet when it is in the “rocking” mode. Always make sure the wheels or stands are in the locked “down” position.

Always attach all provided fasteners tightly according to the instructions. Check frequently. Do not use if there are any loose or missing parts or signs of damage. Do not substitute parts. Contact the manufacturer for replacement parts.

Toys are not to be “mouthed” by the baby and should be positioned clearly out of reach of the baby’s face and mouth.
Do not place cords, straps or similar items that could become wound around the child’s neck in or near this product and do not place product near a window or patio door.

When used as a changing table:

FALL HAZARD : To prevent death or serious injury, always keep child within arm’s reach.

WARNING :

Additional warning in the instructions shall address the following: Strings can cause strangulation! Do not place items with a string around a child’s neck, such as hood strings or pacifier cords. Do not suspend strings over a bassinet or cradle or attach strings to toys.

The left and right gears can only differ by one gear at most. For example, 1 gear on the left and 2 gear on the right.

Attachment System:

A label shall be located on the product as close to the attachment point as possible and that the attachment system must always be used in bedside sleeper mod.

1. Hook Attachment: Begin by attaching the hook to one end of the long rope.
   

2. Place the Hook: Position the hook on the side of the adult bed that is opposite to the side where the bedside sleeper is located.
   Extend the Rope: Extend the long rope across the bed towards the bedside sleeper.
   Wrap Around the Bedside Sleeper: Wrap the rope securely around the bedside sleeper.
   

3. Lock with the Clip: Use the clip to lock the rope in place, ensuring it is snugly attached to the bedside sleeper. Check for Security: Confirm that the attachment is secure by gently tugging on the rope and ensuring it won’t come loose.

4. Place the Baby in the Sleeper: After securing the attachment strap. you can place your baby in the bedside sleeper.
   

WARNING :

Product Warnings:

Warnings on the product shall address the following:
Entrapment Hazard-To prevent death from entrapment. bedside sleeper must be properly secured to adulbed using the attachment system

1. There must be no more than in. (13 mm) gap between bedside sleeper and adult bed
2. Check tightness before each use by pulling bedside sleeper in a direction away from adult bed
3. If gap exceeds in. (13 mm), DO NOT use product. Do not fill the gap with pillows, blankets or other items that are suffocation hazards

Always read and follow assembly instructions foeach product use mode (bedside sleeper, bassinet, play yard).
Always use ALL required parts for each use modeCheck instruction manual for a list of required parts Periodically check product for loose. damaged, or missing parts.
Toavoid death from the infants neck being caught on the top raion the side that is next to the adult bed, the top rail must be nhigher than the adult bed mattress
Bed side beds are suitable for adult beds with a height of 13.4-19.3in
A bedside sleeper is designed to provide a sleepingarea for an infant until he or she begins to push up on hands ancknees or approximately 5 months of age. Move your child tcanother sleeping product when your child reaches this stage.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>