ExBrite MC2432V10LX LED Lighted Medicine Cabinet Instruction Manual

LED Lighted Medicine Cabinet
Installation and Operating Manual

Please do not return the product to the store.
Contact us with any questions.

Model Specification

• Aluminum Frame
• Integrated LED
• Three Mirror
• Adjustable Shelves
• Quiet Hinge（170°Opening）
• Recessed or Surface mount
• Color Temperature:3000-6000K
• Dimming
• Anti Fog
• Built-in 2 sockets and USB
• Clock & Temperature Display
• Light-Sensitive Night Light
• Front and Backlit
• Adjustable 10X Magnifying Mirror

Note
For easy and safe installation, please refer to the following:
Read all instructions thoroughly before installing the enclosed product. Read and take note of all Safety Precautions, care and maintenance information.
PLEASE KEEP THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE DURING PRODUCT OPERATION AND MAINTENANCE.
WARNING AND SAFETY INSTRUCTIONS
Before installing your LED Medicine Cabinet, please make sure that you carefully read through this instruction sheet, refer back to them during installation to ensure your product is fitted safely and correctly. Keep the instruction for future use.
WARNING Risk of Fire and Electric Shock

• All fittings must be installed in accordance with current IEE wiring regulations. If in doubt, please consult a qualified electrician.
• Turn breaker off the electrical supply at the main circuit board before installation and maintenance.
• Suitable for indoor use only. This product should be positioned well away from curtains and fabrics. Never cover the mirror.
• Regularly check any parts for damage, if any part is damaged the product should not be used.

INSTALLATION SAFETY

• Inspect the product immediately upon receipt for any possible damage during transportation or missing parts. Handle the product with care and protect against knocks to all sides and edges of the glass.
• Ensure there are no hidden pipes or cables in the wall before drilling and sawing.
• Wear suitable safety glasses when drilling. Take care if drilling on tiled surfaces in case the drill slips.

CAUTION
The light source of this product is non-changeable light diodes (LED). Do not disassemble the product, as the light diodes can cause damage to the eyes.
NOTE: The important safeguards and instructions that appear in this manual are not meant to cover all possible conditions and situations that may occur. It must be understood that common sense, caution and care are factors that can’t be built into any product. These factors must be supplied by the person(s) caring for and operating the fixture. Do not install this fixture in hazardous locations.

PARTS SUPPLIED

TOOLS REQUIRED

Installation Instruction

The medicine cabinet supports two installation methods:
1.Surface Installation and 2.Embedded Installation.
Please choose the installation way as needed.
Some cabinet doors will be separated from the cabinet to reduce packaging volume. Please install the cabinet door after completing the cabinet installation according to the instruction.
The installation instructions for the cabinet door is at the end of the installation instructions.
Before installing the medicine cabinet, please remove cabinet doors first. This will make the installation easier and more convenient. Certainly, you can proceed with the installation directly, just be careful during installation to avoid any door collisions.

1. First, disconnect the wires from the cabinet doors.
2. Turn the adjustment screw in the picture clockwise to the end to prevent the hinge from disassembling and hitting the cabinet.
3. Then, press the end of the hinges and detach the cabinet door.

Surface Installation Instruction The side panels and cabinets are individually packaged ,
you need follow the STEP 5 to install the side panels for surface mounting, for embedded installation no need install the side boards.
Surface Installation Instruction Step10:Cabinet Door Installation

1. Insert the hinges to the base ,then connect the doors with the cabinet
2. Turn the adjustment screw counterclockwise as shown in the picture to adjust the gap between the door and the cabinet.
3. If necessary, adjust other adjust screws on the hinge to align the doors, ensure that gaps are even and the doors open and close smoothly.
4. Insert the wire on the door into the terminal on the cabinet and tighten the screw

Embedded Installation Instruction
Before installing, it is necessary to determine the opening size, which can be referred to in the table below.

Embedded Installation Dimension

No.| Dimension| W/inch| H/inch| D/inch
1| 24″ X 32″| 23-1/4| 31-1/4| 4
2| 30″ X 32″| 29-1/4| 31-1/4| 4
3| 36″ X 32″| 35-1/4| 31-1/4| 4
4| 40″ X 32″| 39-1/4| 31-1/4| 4
5| 48″ X 32″| 47-1/4| 31-1/4| 4

Embedded Installation Instruction *All diagrams are for reference only.All model dimensions and proportion position will vary.
Step5：Cabinet Door Installation

1. Insert the hinges to the base ,then connect the doors with the cabinet
2. Turn the adjustment screw counterclockwise as shown in the picture to adjust the gap between the door and the cabinet.
3. If necessary , adjust other adjust screws on the hinge to align the doors, ensure that gaps are even and the doors open and close smoothly.
4. Insert the wire on the door into the terminal on the cabinet and tighten the screw

Operating Manual

• Setting the light & Defogger

The buttons turn blue when connected to the main power supply and turn white after a brief touch. Optional to be wired to wall switch by ON/OFF memory function.

| • Briefly touch the button to control on/off the light and illumination modes.
• The first touch is to turn on all the lights, the second touch is to turn on only the front light, the third touch is to turn on only the back light, and the touch again turn off all the lights, and so on.
• Press and hold the button to adjust the brightness when the mirror is on.
• If there is no operation within 15 seconds, touching this button will directly turn off the lights.
---|---
| • Briefly touch the button to change the color temperature among the 3000K,4200K and 6000K when the light is on.
• Press and hold the button to change the color temperature steplessly.
| • The mirror begins to warm up and defog after you press the defogger button.
• Press the button again to turn off the anti-fog function.
• Press and hold the button to turn the blue backlight on or off.
• Note: To prevent damage from prolonged high temperatures, the defogger will automatically stop after 60 minutes of continuous operation.

• Setting the clock
  – Press and hold the Button for seconds, the “Hour” will flash, then briefly touch button to set Hour.
  – Wait for seconds after setting up the Hour then it will automatically switch to the Minute adjustment mode.
  – Briefly touch Button to set up the Minute.
  – Wait seconds after you finish the time setting, the time will be saved automatically.
  – The clock and temperature will automatically scroll for display.

• Interior LED Light – The Interior LED Light will be automatically on when the cabinet door opened.
  – Don’t cover the light sensor.

• Light-Sensitive Night Light
  The top view of cabinet doorThe bottom-up view of cabinet door– When the ambient brightness decreases, the night light will turn on.
  – The rocker switch allows you to toggle the night light function on or off.
  – Don’t cover the sensor.

• Magnifying Mirror
  • The magnifying mirror can be placed anywhere within the illuminated area on the inside mirror of the door, allowing you to adjust its position according to your preferences.
  • The lighting of the magnifying mirror is synchronized with the lighting of the medicine cabinet in terms of brightness and color temperature, and it can be adjusted through the touch switch on the door.

Hotline: +13023368180

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>