EBS SWEDEN W8Q2Y4P3 Multi DC Power Supply User Manual
- June 16, 2024
- EBS SWEDEN
Table of Contents
EBS SWEDEN W8Q2Y4P3 Multi DC Power Supply
Product Information
Specifications:
- USB Outputs: 2 x USB Type A, 5V 2A each
- 9V DC Outputs: 2 x 9V DC outputs, 900 mA each
- 9V/12V DC Outputs: 8 x 9/12 DC outputs (selectable), 900 mA each at 9V, 800 mA at 12V
- Input Power: 24V input power supply (included), handles 100-230V
Overview:
The EBS RUNSTEN is a versatile power supply unit designed for musicians and pedalboard setups. It features multiple USB and DC outputs to power various devices and pedals. The unit also includes special adaptors for extended use and flexibility.
Product Usage Instructions
Connecting Pedals:
To connect your pedals to the RUNSTEN, we recommend using the EBS DC-1 cables. These cables are available in different lengths from EBS dealers and online stores. Connect your pedals using the included cables or the desired lengths.
Powering the RUNSTEN:
Plug the dedicated 24V input power supply into the Input Power Socket on the RUNSTEN. The power supply is universal and compatible with voltages ranging from 100V to 230V.
DC Output Selection:
The RUNSTEN provides both 9V and 12V DC outputs. Each output has a corresponding selector switch marked with the matching output number. Select between 9V or 12V DC by flipping the respective switch.
Extended Use of the RUNSTEN:
The RUNSTEN offers additional capabilities for specific requirements:
Increasing Voltage:
For situations where 9V or 12V DC is not enough, you can increase the voltage by using the included DC1-48 90/0 SER cable. Connect the Red contacts of the cable to two outputs on the RUNSTEN. The total voltage will be the sum of the two connected outputs, delivering up to 24V DC.
Increasing Current:
If you need extra current, use the included DC1-48 90/0 PAR cable. Connect the two Black contacts that are close together to two outputs on the RUNSTEN. The total current will be the sum of the two connected outputs, delivering up to 1800 mA. Note that both outputs must be set to the same voltage to avoid current surge and potential damage.
Special Adaptors:
The RUNSTEN includes special adaptors for various requirements:
- 2.5 mm Cable: Use this cable if your pedal’s DC power input has a 2.5 mm plug. Connect the BLACK contact to the RUNSTEN and the GRAY contact to your pedal.
- Polarity Reversal Cable: Use this cable to reverse the polarity from Center Negative to Center Positive if your pedal requires a Center Positive connection. Connect the BLACK contact to the RUNSTEN and the RED contact to your pedal.
If you require additional special adaptors, they are available for purchase from the EBS webshop linked on our website.
Using RUNSTEN as an Extension:
If you use the RUNSTEN as your sole source of power, connect it to a 100-240V power supply using the included universal adaptor.
However, if you have another power supply with an 18-24V output, you can use the RUNSTEN as an extension. Use a cable with an EIAJ-5 contact to connect to the RUNSTEN. Please note that if using the RUNSTEN as an extension, the current of the outputs will depend on the specifications of the other power supply and may not align with the RUNSTEN’s specifications.
FAQ:
Q: Where can I find more information about EBS pedalboard accessories?
A: For information about all EBS pedalboard accessories, including the original space-saving Flat Patch Cables, you can scan the provided QR code. You will find our entire catalog at ebssweden.com.
OVERVIEW
We recommend the EBS DC-1 cables to connect your pedals to RUNSTEN. If you need more/other lenghts than the included cables, they are available at EBS dealers and online stores across the World.
EXTENDED USE OF THE RUNSTEN
When 9 or 12V DC isn’t enough, or you need extra current, or you need to reverse the polarity, or connect a pedal with a 2.5 mm contact, you can use the special adaptors included with your RUNSTEN (if you need more, they are available from the EBS WEBSHOP as well).
- To increase the VOLTAGE use the DC1-48 90/0 SER cable included with the Runsten. Connect the Red contacts to two outputs on the RUNSTEN, and the total Voltage will be the sum of the two connected outputs to deliver up to 24V DC.
- To increase the CURRENT use the DC1-48 90/0 PAR cable included with the Runsten. Connect the two Black contacts that are close together to two outputs on the RUNSTEN, and the total Current will be the sum of the two connected outputs to deliver up to 1800 mA. IMPORTANT! Both outputs MUST be set to the same voltage in order to avoid current surge and eventual damage.
- Use this cable if the DC power input on your pedal has a 2.5 mm plug. Connect the BLACK contact to the RUNSTEN and the GRAY to your pedal.
- Use this cable to reverse the polarity from Center Negative to Center Positive, if your pedal needs Center Positive connection. Connect the BLACK contact to the RUNSTEN and the RED one to your pedal.
If you need more of these special adaptors, they are all available to order from the EBS webshop, linked from our website ebssweden.com
EXTENDED USE OF THE RUNSTEN, prt 2
If you use RUNSTEN as your sole source of power, we always recommend to use
the included and universal adaptor to connect RUNSTEN to 100-240V.
How ever, some power supplies from other brands features an 18-24V output. If
your power supply has that option, you can use the RUNSTEN as an extension to
that power supply. Use a cable with an EIAJ-5 contact to connect to the
Runsten.
NOTE: If using RUNSTEN as an extension to another power supply, the current of
the outputs will depend on the specifications of the other power supply and
not line up with the RUNSTEN specifications.
For information about all EBS pedalboard accessories, including the original space-saving Flat Patch Cables, scan the QR code. You will find our entire catalog at ebssweden.com
TECHNICAL SPECIFICATIONS EBS RUNSTEN POWER SUPPLY
-
Output Specifications: Ultra low noise DC Outputs:
8 x selectable 9 or 12V, 900 resp 800 mA 2 x 9V, 900 mAAll outputs are short circuit protected and fully galvanically isolated. Connections are center negative on 2.1mm DC jacks. -
USB Outputs: 2 x USB Type A, 5V 2A each
Input specifications* -
Input voltage range: 18-24V DC
-
Maximum power handling: 120W at 5A input.
-
Dedicated external power supply included. The supplied AC/DC desktop type adapter is rated 24V/2.5A which equals a total maximum power of 60W, which should be sufficient for most setups.
- Size: 175 x 69 x 25 mm / 6.89 x 2.72 x 0.98 inch
- Weight: 310 g / 0.68 lbs
Specifications are subject to change without notice.
If you did not find the answer in this manual, please contact EBS at
support@ebssweden.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>