avide DOUBLE-18W Desk Lamp User Manual

avide DOUBLE-18W Desk Lamp

Specifications

• Model: ABLDL-DOUBLE-18W
• Material: Aluminum, Silicone
• Adjustable Clamp: Up to 7 cm
• Color Temperature Selection: 3000k-3500k-4000k-5000k-6500k
• Brightness Adjustment: 10%-100% adjustable

Product Usage Instructions

Installation

• Assembly:
  • Connect the flexible tube connector to the control box.
  • Insert the flexible tube connector into the aluminum tube and tighten the screws.
  • Insert the aluminum tube into the clamp and tighten the screws.
• Plug in the power adapter.

Usage

• To turn on/off the lamp, press and hold the switch for approximately 2 seconds.
• The lamp will automatically turn off after 40 minutes if left untouched for a long press of approximately 2 seconds.
• To adjust the color temperature, press the corresponding button to cycle through the available options.
• To adjust the brightness, press the “+” or “-” button to increase or decrease the brightness level between 10% and 100%.

Component Part and Function

Use Instructions

• Angle adjustment
• The arm length on both sides of the lamp can be adjusted by 90°
• You can adjust the light direction as you like

• Touch turn on/off the lamp. Press long press the switch for 2 seconds, the light flashes 2 times, then enter the timing 40 minutes mode, and the light will automatically turn off after 40 minutes
• Press to adjust the color temperature. There are 5 color temperatures available (3000k-3500k-4000k-5000k-6500k)
• Press to adjust brightness, There are (10%-100%6)

Product installation

If the lamp does not light up or flicker, please check or deal with it by the following methods:

1. Check whether the adapter used by the lamp is a special power adapter for the light;
2. Please try to change a socket (exclude whether it is the reason for the socket);
3. Check whether the DC plug is fully inserted into the power hole of the lamp:
4. Whether the lamp head is completely inserted into the main body. After trying the above methods, if the problem has not been solved, you can contact the place of purchase.

Before using the product for the first time, please read the instructions and retain them for later reference.

Warnings

• Make sure that the appliance has not been damaged during transport!
• Do not disassemble the product at home.
• To avoid damage, please do not overtighten the adjustable parts of the lamp.
• Please do not use the lamp at high temperatures or in high-humidity environments. The lamp can only be used in dry, indoor conditions!
• Do not stare into the light of the LED.

In the following cases, please unplug the power cord immediately and do not use the lamp:
The power cord or the connector has been damaged. If the power cable becomes damaged, it should be replaced with cables, obtained directly from the manufacturer or its service facility.

• The lamp base is humid or wet.
• In case of any damage to any part of the lamp.
• The lamp smokes or sparks.
• Flashing or failure of the LED light source.

The product contains a built-in battery. Do not expose the product to extreme temperatures or disassemble the product. The battery can only be replaced by a specialist. When replacing the battery, please place the old battery in the designated collection.

1. Please charge the battery using the supplied charger before using it for the first time.
2. Use the touch switch to turn the LEDs on and off.
3. The brightness of the lamp can be set steplessly by pressing the power button.
4. When the battery dives, the brightness decreases continuously.
5. Use the included USB cable and 5V USB adapter or USB port on your computer to recharge the battery.
6. During charging, the indicator on the back lits continuously.
7. When the battery is charged, the indicator light turns off.
8. Continuous charging of the lamp while operating it, significantly reduces battery life.

Cleaning / Maintenance

The unit may require cleaning at least once a month, depending on the manner of use.

1. Power off the luminaire before cleaning!
2. Use a slightly moistened cloth to clean the outer surface of the luminaire. Do not use any aggressive cleaners. Avoid getting water inside the product and on the electric components!

Waste equipment must not be collected separately or disposed of with household waste because it may contain components hazardous to the environment or health. Used or waste equipment may be dropped off free of charge at the point of sale, or at any distributor which sells equipment of identical nature and function. Dispose of products at a facility specializing in the collection of electronic waste. By doing so, you will protect the environment as well as the health of others and yourself. If you have any questions, contact the local waste management organization. We shall undertake the tasks pertinent to the manufacturer as prescribed in the relevant regulations and shall bear any associated costs arising.

FAQ

• Q: How do I adjust the color temperature?
  • A: Press the color temperature button to cycle through the available options: 3000k-3500k-4000k-5000k-6500k.
• Q: How do I adjust the brightness?
  • A: Press the “+” or “-” button to increase or decrease the brightness level between 10% and 100%.

EU Importer: Armin Trade Kft. H-4024 Debrecen, Kossuth u. 22, ll/4. info@armintrade.com
This product was designed and developed in the European Union. Copyright © 2023 Avide ® All Rights Reserved. For product-related information, please visit: www.avidelighting.com
For technical or warranty support, please contact the authorized representative:

Bramcke GmbH
52353 Düren An Gut Nazareth 18A Germany
www.bramcke.de

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>