LAFATI SC189 Stainless Steel Workstation Sink Installation Guide
- June 17, 2024
- LAFATI
Table of Contents
LAFATI SC189 Stainless Steel Workstation Sink
MATERIAL
True 16 Gauge Thickness Premium T304 Grade Stainless Steel 18/10
Chromium/Nickel Content Commercial Brushed Finish
FEATURES
- Heavy-duty sound guard padding and undercoating
- Slanted bottom with elegant drain grooves for easy draining
- Single-Tier Ledge for Accessories
PARTS LIST
Product Details
Introduction
Conformance
This product conforms to EC Regulation 1935/2004 on materials and articles
intended to come into contact with food.
Warnings and personal safety
Care and use of kitchen sinks
“ Do’s”
- Clean the sink every day by thoroughly rinsing it with a mild soap and warm water then wipe it dry.
- Rub lightly with a soft cloth in the direction of the grain lines regularly for additional preventive cleaning.
- Keep the sink free of any standing water as this can cause a buildup of mineral deposits, which can affect the appearance of your sink.
- Any stubborn stains should be removed by scrubbing in the direction of the grain using a mild abrasive such as Comet. Always rinse the sink thoroughly after using any cleaning agent and wipe it dry.
- Clean any mineral deposits built up with a mild solution of vinegar and water followed by a thorough flushing with water.
- Remove any scratches with a Scotch-Brite pad and cleaning agent rubbing in the direction of the grain. NOT RECOMMENDED FOR MIRROR FINISH.
“Do’s”
Do not allow food or beverage residue as well as metal canned products to
remain on the sinksurface.
- Do not leave pots, steel cookware, or utensils in the sink for a lengthy period; iron particles often develop rust spots on the stainless steel surface.
- Do not use a steel wool or scouring pad as it damages the sink surface and causes discoloration.
- Do not set hot pans or other kitchen products directly in the sink.
- Never leave rubber mats, sponges, or cleaning pads in the sink overnight as this will trap water andcould stain and discolor the sink surface.
- Do not use any drain cleaning products containing sulfuric or hydrochloric acid as this will damagethe sink. Silver cleaners can also contain acids that could damage the sink surface.
- Never let the sink come into contact with water containing heavy metals which can make its coloifade or get it rusty.
- Never use the inside of the sink as a cutting surface
Installation instructions
Remarks: While installing, please apply sealant or adhesive tape on the screw thread in case of leaks
Maintenance and cleaning
After use. please clean the product by rubbing the stainless surface with a clean, damp cloth and wiping it dryAvoid fluoride from household products, bleach, food, silver cleaning materials, sulfur, and hydrochloric acidcleaning products which may cause potential corrosion damage to the sink
www.lafatitech.com
[email protected]
SPECIFICATION SHEET