GENESIS Zircon XIII Customizable Mouse for Gamers Installation Guide

: June 10, 2024
: Genesis

QUICK INSTALLATION GUIDE

WELCOME TO #GENESISGAMING

Scan QR code for more

GENESIS Zircon XIII Customizable Mouse for Gamers 1

PRODUCT INFORMATION

PACKAGE CONTENT

a) b)

REQUIREMENTS

PC or compatible device with a USB port
Windows® 7/8/10/11, Linux, Android

USER MANUAL

7 programmable buttons
Hot swappable mechanical switches
Top grade optical sensor with up to 26000 DPI
Advanced software with macro/profile editor
4 sets if spacers for button stroke adjustment
Dual communication mode (2.4GHz | USB)
2 changeable back covers for body size adjustment
Built-in rechargeable battery

INSTALLATION

Connect the cable to a free USB port on your computer, it is necessary to wait about 15 seconds for the first connection until the drivers are fully installed.
The mouse includes software that allows you to set up advanced features, if you want to use these features, you need to download and install the software from our website www.genesis-zone.com
Open the installation folder and then double-click the setup.exe file.
Follow the instruction to install the program.
After a successful installation, the software icon appears on the main bottom panel. Double-clicking the icon opens the settings interface.

WIRED MODE

The mouse will switch to wired mode automatically once you connect USB cable to the mouse and computer.

Tips:

Wired mode offers better smoothness performance of sensor than wireless mode, for best results set the polling rate to 1000 Hz.
Wired mode allows simultaneous using of the mouse and charging the battery.

WIRELESS MODE

Connection of mouse via USB receiver

Turn ON your computer or other compatible device
Move the switch located on the bottom of the mouse to position
Connect receiver to a free USB port on your computer
The operating system will automatically install the required drivers
The mouse is ready for use

Note:

The device is equipped with intelligent technology for energy management. When the mouse enter into hibernation (sleep) mode, press any button of the mouse for its revival.
The mouse is equipped with an ON/OFF switch to save the battery power when not in use for longer period.

Tips:

To get the best performance of wireless connection and reduce latency, connect the USB receiver as close as possible to the mouse and make sure that there are no obstacles between the mouse and the receiver that can interfere with the wireless signal.
In wireless mode set the polling rate to 500 Hz to get better smoothness performance of sensor.

CHARGING THE BATTERY

Connect the included USB-C cable to the mouse
Connect USB plug to a suitable power source (max. output DC 5V 0,5A)
When the battery is fully charged, the DPI indicators will stop moving.

Note: When the battery level is too low, the DPI indicator will starts flashing.
Caution: Please charge the battery every 3 months, if you do not use the mouse for a long time. Long-term storage of the mouse with low battery level, or using the chargers with power over 5V 0,5A may damage the battery.

OPENING THE MOUSE

Remove the back cover by pulling at place 1 shown on illustration
Push the button cover at place 2 shown on illustration and pull to remove it. We recommend to remove USB receiver beforehand to make it easier of removing the cover.
Slide the locking mechanism 3 located on the bottom of mouse and place opening tool 4 at the location 5 shown on illustration to open the mouse body

REPLACING THE SWITCHES

To replace the switches simply remove the switch 6 shown on illustration after opening the mouse body and insert the new one in the right direction

BUTTON TRAVEL DISTANCE ADJUSTMENT

Factory pre-installed button spacers are 0,6 mm
If you want adjust button travel distance remove pre-installed spacers from part 7 and insert new spacers with selected thickness

BUTTON FORCE ADJUSTMENT

Factory pre-installed button springs are 15 g (silver color spring)
If you want apply a higher button force, remove pre-installed springs from part 8 and insert new springs with 25 g force (copper-colored spring)

CLOSING THE MOUSE

Insert the button cover into dedicated place starting from the front and push the part 9 shown on illustration to snap into latches
Close the mouse body by sliding the front part 10 forward firstly, then slide the locking mechanism 3 and push the back part firmly to snap into the latches
Insert the back cover into dedicated place by first inserting the front part into mounting holes 11

REGULATORY

EU Declaration of Conformity – Hereby, IMPAKT S.A. declares that that the equipment type NMG-2089, NMG-2090 is in compliance with Directives 2014/53/EU, 2011/65/EU and 2015/863/EU. The full text of the EU declaration of conformity is available via the product tab at www.impakt.com.pl.

The WEEE symbol (the crossed-out wheeled bin) usage indicates that this product is not a household waste. Appropriate waste management aids in avoiding consequences, which are harmful for people and environment and result from dangerous materials used in the device, as well as, improper storage and processing of such equipment. Segregated household waste collection allows recycling of materials and components of which the device was made of. In order to get detailed information about recycling of this particular product, please contact your retailer or a local authority.

Frequency range: 2400 – 2483 MHz
Maximum radio-frequency power transmitted: +11,0 dBm

SAFETY INFORMATION

Use as intended, improper usage may break the device.
Non-authorized repairs or disassembly voids the warranty and may damage the product.
Dropping or hitting the device may lead to device being damaged, scratched or flawed in other way.
Do not use the product in low and high temperatures, strong magnetic fields and damp or dusty surroundings.

GENERAL

The safe product, conforming to the EU requirements.
The safe product, conforming to the UKCA requirements.
The product is made in accordance with RoHS European standard.
2 years limited manufacturer warranty

GENESIS Zircon XIII Customizable Mouse for Gamers 5

WWW.GENESIS-ZONE.COM

PRODUCT & SUPPORT INFORMATION

© GENESIS. All rights reserved. GENESIS name and logo, and all related product and service names, design marks and slogans are the trademarks or registered trademarks of GENESIS. All other product and service marks contained herein are the trademarks of their respective owners. | V.3280