TEKHNE Visor EZ115 Bike Head Light Installation Guide

TEKHNE Visor EZ115 Bike Head Light

Product Information

The Visor is a bike accessory that provides protection from sunlight and other elements while riding. It comes in a vibrant redcolor which symbolizes energy and passion, and a blue color which represents intelligence, innovation, and reliability.

Specifications

• Part Name: Visor
• Quantity: 1
• Part Name : Damper
• Quantity: 1
• Part Name : Cap
• Quantity: 1
• Part Name : Tape
• Quantity: 2

Product Usage Instructions

Precautions

1. Follow the instructions carefully to prevent incorrect assembly.
2. Avoid removing the visor after affixing it onto the bike.
3. Avoid washing the visor for 24 hours after affixing.

Assembly Instructions

• Step 1: Peel tape liner
  Start by peeling off the liner from the tape.

• Step 2: Loosen Bolt
  Loosen the bolt temporarily to prepare for installation.

• Step 3: Align the Cover Handle
  Make sure the guiding rib is aligned and centered to the Cover Handle before proceeding to the next step.

• Step 4: Clean the Surface
  Ensure that the surface where the visor will be attached is clean from grease, dirt, and dust.

• Step 5: Attach the Visor Cover Handle
  Push the Visor Cover Handle onto the bike with a firm push.

• Step 6: Press the Guiding Rib
  Press the guiding rib of the visor onto the Cover Handle at an angle.

• Step 7: Hold Visor Upwards
  Hold the visor upwards to prevent the tape from sticking onto the Cover Handle at this moment.

• Step 8: Adjust and Tighten the Bolt
  Adjust and tighten the bolt to secure the visor in place. Make sure it is centered using the center marking.

• Step 9: Push Visor Headlight Bolt
  Push the visor headlight bolt into position.

FAQ

• Can I remove the visor after affixing it onto my bike?
  It is recommended to avoid removing the visor after affixing it onto the bike to ensure proper functionality and durability.

• Can I wash the visor immediately after affixing it?
  It is advised to avoid washing the visor for 24 hours after affixing to allow the adhesive to properly set.

INTRODUCTION

• Tekhne is inspired by the Greek word ‘technê’ (pronunciation: /’te.xni/), meaning art, craft, technique, or skill.
• Products offered byTekhne are specially crafted to meet the needs and expectations of consumer’s machines (motorcycles) – performance and reliable parts with cutting-edge technology.
• The colours are specifically chosen to further emphasize what the brand stands for:
  • Red symbolizes energy and passion.
  • Blue represents intelligence, innovation and relibility.

BOX CONTENTS

1. VISOR 1
2. DAMPER 1
3. CAP 1
4. TAPE, 1 2

ASSEMBLY INSTRUCTIONS

Precaution

• Carefully follow the instructions to prevent incorrect assembly.
• Avoid removing the visor after affixing onto bike
• Avoid washing the Visor for 24 hours after affixing.

1. Loosen Bolt
2. Adjust headlight to the lowest position
3. Temporary tightened Bolt
4. Peel tape liner

IMPORTANT!
Make sure the guiding rib is alligned and centered to the Cover Handle before proceed to step ⑤

5. Position the Visor onto Cover Handle at an angle. Make sure guiding rib is in contact with the Cover Handle.
   Hold Visor upwards to prevent Tape from sticking onto Cover Handle at this moment.

6. Push the Visor onto Cover Handle

7. While pushing, press the Visor down to stick onto Cover Handle

8. Adjust the headlight until the Bolt is center to the marking. Tightened the Bolt.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>