Pyle PDICLE35 Ceiling Speakers Instruction Guide
- June 4, 2024
- Pyle
Table of Contents
Pyle PDICLE35 Ceiling Speakers
Specifications
- Includes (2) (2) Speakers, size 3.5
- Housing is Made of a Lightweight Aluminum Alloy
- Internal LED Light: Power-Efficient and High-Efficiency
- Full 2-Way Range Sound reproduction in stereo
- High-Compliance Easy Installation: 1/2″ Polymer Tweeter Spring-Loaded Clips
- Rubber-edged Reinforced Polypropylene Cone
- Perfect for Custom Installations & Applications, Simple Speaker Connector Post Mounts Flush on Walls or Ceilings
- Construction using environmentally friendly ABS
What’s in the box?
- 5’’ Ceiling Speakers(2)
Product Descriptions
The Pyle PDICLE35 two-way in-ceiling speaker system delivers stereo sound to any room in your home or office without cluttering floor space. Each unit in the pair measures 3.5” round, equipped with a 1” high-temperature voice coil and high-compliance 1/2″ polymer tweeter for a full, rich sound. These speakers pump out up to 140 watts max and are sold as a pair.
Features
- MAX 140 Watts of power output
- white LED bulb with a 5-watt output
- Light output: 650 Lumen
- 8 Ohm Impedance
- Detection range: 90 dB
- Frequency Reaction: 60–20 kHz
- Dimensions overall (diameter x depth): 7 in. x 2.8 in.
- Cutout Dimensions: 2″
- 7″ Mounting Depth
- Weight of Speaker: 36 lbs. (-Each)
- Voltage: 100/240
- 62 pounds in weight.
ADVANCED DESIGN
The speakers in this surround sound system have a circular shape that makes them ideal for any unique audio application on almost any flat surface without taking up valuable floor space. The Pyle in-wall and ceiling speakers make it easy to add sound to any space. Installation is made simple by the included cut-out template. Any room in your house or workplace can easily receive stereo sound thanks to the Pyle In-Wall/Ceiling Speakers.
FLUSH MOUNT
The integrated spring-loaded clips on the Pyle home ceiling speakers allow for safe and flush wall mounting, and the grill covers’ stain-resistance and reinforced ABS construction add to their aesthetic appeal.
UPGRADED SOUND
It’s simple to produce lustrous sound performance with wireless surround sound. The 1/2″ high-compliance polymer tweeters fill the room with clear 2-way sound, producing full-ranged audio.
FIRST AND FOREMOST, SAFETY
Each speaker has an integrated LED light, and the housing basket is made of an aluminum frame for added heat resistance.
Note
Products with electrical plugs are made with American consumers in mind.
Because outlets and voltage vary from country to country, this device might
need an adapter or converter to be used where you are traveling.
Warranty and Support
You can get in touch with the manufacturer directly or find out more information on their website if you’d want a copy of the warranty for a product you saw on Amazon.com. Manufacturer’s warranties might not always be applicable, depending on things like how the product is used, where it was bought, and who sold it to you.
FAQ’s
With the appropriate wall dimmer, can the LED lights be dimmed?****
No. The LED lights can only be turned on or off; they cannot be dimmed.
Does the light only turn on when the system is turned on?****
Actually, it’s two different objects that are held together by a few screws. The speaker, which screws onto the rear of the lights, has its own set of wires and terminals for producing sound, much like any other standard speaker that is already fitted together. The front component of the lights has two wires that power the LEDs inside it.
Can I wire the speakers to turn on Bluetooth constantly?****
Hello, you must attach this device to a wall outlet. Visit our website, pyleaudio.com, to view the unit’s further specifications. For further information, enter the model number PDICLE35 in the search box.
Are these water-resistant and appropriate for use in the shower or bathroom?****
It is not moisture-resistant.
Can I turn these lights down?****
Hello, sorry, you are unable to lower the lights. For additional details, please visit our website at pyleaudio.com. Enter the model number into the PDICLE4 search box. I appreciate it.
Can TV speakers be ceiling mounted?****
TV audio can be played using ceiling speakers; however they cannot be connected since TVs lack independent speaker outputs.
What distance from the ceiling should speakers be hung?****
In-wall and ceiling speakers need to be separated by at least 18 to 24 inches.
Can speakers that hang from the ceiling be used?****
Because they provide the same volume of audio, in-ceiling speakers can be utilised in place of in-wall speakers. The size difference will be the most noticeable. Typically, in-wall speakers are bigger than in-ceiling speakers.
Must speakers installed in ceilings be enclosed?****
Yes. Your in-ceiling speakers’ sound quality could deteriorate if a back box is not fitted, which could result in noise pollution in the surrounding areas.
How do I play music through the speakers in my ceiling?****
Install speaker wires on each amp-powered speaker after purchasing a multi- zone AV receiver. By selecting an AV receiver with Bluetooth and WiFi built in, you may find that setting up your home audio system is less complicated.
Are the speakers on the ceiling putting out good sound?****
Actually, it’s a fantastic idea to play music over ceiling speakers. To give you the impression that you are at a live performance or event, they could use surround sound.
Do I require a subwoofer for my ceiling speakers?****
A subwoofer will be useful in handling the bass and low-end frequencies even if ceiling speakers are capable of handling all frequencies.
Do I need an amplifier for my speakers?****
You don’t need an amplifier. You don’t need to be concerned about running out of power if your music player can handle it on its own.
How many ceiling speakers are required for each room?****
For a more uniformly dispersed sound, rooms larger than 3 x 3 metres and 5 x 5 metres should use one pair of ceiling speakers and two pairs, respectively.
Why aren’t the speakers in the ceiling working?****
The audio source, the wiring, or the speakers themselves could all be at fault. You could change those connections to see whether the source is the problem. As an illustration, connect a working speaker to a faulty speaker.