PROAIM FLCM-FLN-600N Flowline 600N Stabilizing Body Support for Camera Instruction Manual
- June 17, 2024
- PROAIM
Table of Contents
PROAIM FLCM-FLN-600N Flowline 600N Stabilizing Body Support for Camera
Product Information
Specifications
- Product Name: Flowline Professional Series (FLCM-FLN-600N|750N)
- Weight Capacity: 12kg to 15kg for 600N Jacket, 15kg to 19kg for 750N Jacket
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is listed below.
- Suspension Line Camera Hook
- Height Adjustment Knobs
- Accessory Bag
- Support Arm
- Angle Adjustment Ring
- Side Support Adjustment
- Storage Bag
Product Usage Instructions
Flowline Setup
NOTE: It is recommended to attach the minimum required weight for pulling down the balancing rope to ensure proper operation of your Flycam Flowline system.
- Join the Support Arm with the Section on the Support Jacket using the simple push-fit technique.
- Slightly loosen all four Adjustment Knobs provided on the back of the Support Jacket to adjust the height of the Support Arm.
- Wear the Support Jacket and tighten the buckles provided at the waist and chest. Then adjust until you find it comfortable.
- Adjust the Support Arms on both sides. This will fine-tune your Jacket to a comfortable position and also help in shifting weight to your shoulders and hips.
- Loosen the knob on the hook and attach the camera to it. Tighten the knob back to ensure a slip-free connection.
Note: When filming upwards or downwards, you might have to manually pull up or pull down the camera setup at your convenience.
Note: Leave a gap of approximately 2cm/1″ between the top of the Camera
Hook and the Support Arm.
- Finally, attach one end of the Safety Belt with the camera and the other end with the Support Jacket for more safety and protection.
- When folding the Flycam Flowline, always make sure to put the upper part of the Support Arm inside the hip/waist belt and fasten the buckle at the hip/waist belt. This will prevent the Suspension Line from wearing.
Your Flycam Flowline Professional Series is all dressed up and ready to go!
(Shown with optional accessories)
Warranty: We offer a year warranty for our products from the date of purchase. Within this period of time, we will repair it without charge for labor or parts. Warranty doesn’t cover transportation costs nor does it cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspection and evaluation by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissatisfaction, please Contact us immediately and we promise our utmost support and care until you use our product.
FAQ
Q: What is the weight capacity of the Flowline Professional Series?
A: The weight capacity is 12kg to 15kg for the 600N Jacket and 15kg to 19kg for the 750N Jacket.
Q: How should I adjust the height of the Support Arm?
A: Slightly loosen all four Adjustment Knobs on the back of the Support Jacket and adjust the height to your preference.
Q: How should I attach the camera to the Flowline system?
A: Loosen the knob on the hook, attach the camera, and then tighten the knob to ensure a secure connection.
Q: How should I fold the Flycam Flowline for storage?
A: Put the upper part of the Support Arm inside the hip/waist belt and fasten the buckle at the hip/waist belt to prevent the Suspension Line from wearing.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>