LAVEX 712SSUP1842 Urinal Partition Instruction Manual

LAVEX 712SSUP1842 Urinal Partition

Product Information

Specifications

• Model Numbers: #712SSUP1842, #712SSUP2442
• Product Type: Urinal Partition
• Parts Included: Partition (x1), Wall Brackets (x3), Short Self-Tapping Screws (x12), Screw Anchors (x6), Long Expansion Screws (x6)

Product Usage Instructions

Assembly Instructions

1. Locate the Partition (A) and Wall Brackets (B).
2. Using the required tools (not included), gather the Short Self-Tapping Screws (C) and Screw Anchors (D), as well as the Long Expansion Screws (E).
3. Position the Wall Brackets (B) on the wall where you want to mount the Partition (A). Use a level to ensure they are aligned properly.
4. Mark the positions for drilling holes on the wall using the Wall Brackets (B) as a guide.
5. Drill holes on the marked positions, taking care not to go fully through the Partition (A).
6. Insert the Screw Anchors (D) into the drilled holes.
7. Align the Wall Brackets (B) with the Screw Anchors (D) and secure them using the Short Self-Tapping Screws (C).
8. Place a stable support under the Partition (A) to prevent movement while marking it.
9. Mark the desired spacing between the brackets on the Partition (A).
10. Drill holes on the marked positions on the Partition (A).
11. Align the Wall Brackets (B) with the drilled holes on the Partition (A) and secure them using the Long Expansion Screws (E).

FAQ

• Q: What tools are required for assembly?
• A : The required tools are not included in the product. You will need a drill and appropriate drill bits for the wall material, a level for alignment, and a screwdriver for securing the screws.
• Q: How do I prevent the Partition from moving during assembly?
• A: We recommend placing a stable support, such as a heavy object or a second person, under the Partition while marking and drilling to prevent movement.

ASSEMBLY INSTRUCTIONS

REQUIRED TOOLS

NOT INCLUDED

• Marking Tool
• Power Drill
• Drill Bits (1/4″ and 13/64″)

INCLUDED

• Allen Key

PARTS LIST

STEP 1

• Establish the desired location to install partition and ensure the location has adequate support.
• Mark down a centre line where the partition will be installed.

STEP 2

• Mark drill holes for Wall Brackets (B) using the holes in the Wall Brackets (B) as a template.
• Erase the centre line.

Note: Keep in mind to ensure the brackets in line with one another through their centres on the previously made center line and keep the desired spacing between the brackets.

STEP 3

• Use the desired drill bit (typically
• a 1/4″) and a power drill to create holes for anchoring.

STEP 4

• Push the included Screw Anchors (D) into the newly drilled wall holes.

STEP 5

• Use the Long Expansion Screws (E) and Allen Key to mount the wall brackets into the Screw Anchors (D).

STEP 6

•  Slot the Partition (A) into the Wall Brackets (B) and mark where drill holes should be on the Partition (A) using the Wall Brackets (B) as a template.

Note: We recommend you use a stable support to put under the partition to prevent movement while marking the partition.

STEP 7

• Remove the Partition (A) from the Wall Brackets (B).
• Use the desired drill bit (typically 13/64″) and a power drill to create holes for anchoring on Partition (A) using the areas just marked.

Note : Be mindful of drill depth so you don’t go fully through the Partition.

STEP 8

• Put the Partition (A) back into the Wall Brackets (B) and secure the partition using the included Short Self-Tapping Screws (C) and the Allen Key.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>