LAVEX INDUSTRIAL Stationary Receiving Desk Instruction Manual
- October 30, 2023
- LAVEX INDUSTRIAL
Table of Contents
LAVEX INDUSTRIAL Stationary Receiving Desk
Product Information
The Stationary Receiving Desk is a sturdy and durable desk that comes with a top storage compartment, a drawer box, and a shelf. The desk is designed to provide ample storage space and can be used in various settings such as offices, warehouses, and homes. The desk is made of high-quality materials and is easy to assemble.
Product Usage Instructions
- Begin by unpacking all the parts and confirming that you have all the necessary components listed in the assembly instructions.
- Start by assembling the side underframes (A) using the hex screws (included) and the top horizontal tubes (B). Refer to Figure 1 for guidance.
- Attach the shelf (C) to the underframes using the cross-recessed pan head screws (D), flat washers (E), and flange nuts (P). See Figure 2.
- Attach the drawer box (J) to the underframes using the cross-recessed pan head screws (D), flat washers (I), and flange nuts (P). See Figure 2.
- Attach the top cover plate (L) and the top storage compartment (M) to the drawer box using the M6 x 12mm cross-recessed flat head screws (N), flat washers (O), and nylon lock nuts (K). Turn up the cover plate when installing the screws for convenient assembly. See Figures 5 & 6.
- Once all parts are assembled, confirm that everything is secure and in place.
- Your Stationary Receiving Desk is now ready to use.
PARTS
- A (2) Side Underframe
- B (2) Top Horizontal Tube
- C (1) Shelf
- D [4) Cross-recessed pan head screw
- E (4)¼” Flat Washer
- F (4)¼-20″ Nylon Lock Nut
- G (12)⅚-18″ × 1½” Hex Screw
- H (8) ¾6-18″ Nylon Lock Nut
- I (8) ⅚” Flat Washer
- J (1) Drawer Box
- K (1) MS743 Lock
- L (1) Top Cover Plate
- M (1) Top Storage Compartment
- N (4) M6 × 12mm Cross Recessed Flat Head Screw
- 0 (4) M6 Flat Washer
- P (4) M6 Flange Nut
ASSEMBLY INSTRUCTIONS
Install the underframes and the shelf. Use 5/16–18″ x 11/2″ hexagon screws to
install the top horizontal pipes and use 5/16–18″ x 11/2″ Hexagon screws, flat
washers, and nylon lock nuts to fix the shelf. See figures 1 & 2. Side
Underframe ( x2 ) Hex Screw ( x8 ) Top Horizontal Tube ( 2x ) Flat
Install the drawer box. Fix the box to the underframes with 1/4–20″ x 11/2″
cross-recessed flat head screws, flat washers, and nylon lock nuts. See
figures 3 & 4.
Install the top cover plate and the top storage compartment. Use M6 x 12mm
cross recessed flat head screws, flat washers, and nylon lock nuts to fix the
top cover plate and the top storage compartment to the drawer box. Turn up the
cover plate when installing the screws for convenient assembly. See Figures 5
& 6.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>