LAVEX 257WB3048S Steel Table Top Work Table Instruction Manual

LAVEX 257WB3048S Steel Table Top Work Table

PARTS

ASSEMBLY

1. STEP 1
   Insert one of the adjusting feet (A) into a step rivet of one of the leg frames (B). Choose your desired height and use a nylon rivet (C) to secure the foot.

2. STEP 2
   Repeat Step 1 to install all four adjusting feet.

3. STEP 3
   Secure the lateral channel bracing (D) to the leg frames using the screws (E) and nylon lock nuts (F) provided.

4. STEP 4
   Flip the table upside down on a surface that won’t scratch. Start installing the middle support bars, place them diagonally inside and rotate so that the holes line up. Secure the bars in place with provided hardware.

5. STEP 5
   Slide the last two support bars into place on the very ends of the tabletop, lining up the holes in the same fashion as the middle ones. Do not screw end pieces in yet. Flip the tabletop over onto the assembled legs.

6. STEP 6
   Line up the three holes from the tabletop, support bars, and legs and secure with the provided hardware

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>