PHILIPS Dynalite DMC4 UL DCM-DyNet Communication Module Instruction Manual

June 4, 2024
Philips

Dynalite DMC4 UL DCM-DyNet Communication Module
Instruction Manual
PHILIPS Dynalite DMC4 UL DCM DyNet Communication
Module

Installation Instructions

PHILIPS Dynalite DMC4 UL DCM DyNet Communication Module - icon
1 Devices must be installed by a qualified electrician in accordance with all national and local electrical and construction codes and regulations.
PHILIPS Dynalite DMC4 UL DCM DyNet Communication Module - fig
1PHILIPS Dynalite DMC4 UL DCM DyNet
Communication Module - fig 2PHILIPS
Dynalite DMC4 UL DCM DyNet Communication Module - fig 3PHILIPS Dynalite DMC4 UL DCM DyNet Communication Module -
fig 4PHILIPS Dynalite DMC4 UL DCM
DyNet Communication Module - fig 5PHILIPS Dynalite DMC4 UL DCM DyNet Communication Module -
fig 6vPHILIPS Dynalite DMC4 UL DCM
DyNet Communication Module - fig 7PHILIPS Dynalite DMC4 UL DCM DyNet Communication Module -
fig 8PHILIPS Dynalite DMC4 UL DCM
DyNet Communication Module - fig 9PHILIPS Dynalite DMC4 UL DCM DyNet Communication Module -
fig 10PHILIPS Dynalite DMC4 UL DCM
DyNet Communication Module - icon 2 Federal Communications Commission (FCC) Compliance Notice: Radio Frequency Notice – This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful nterference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Any modifications not approved by the manufacturer of this device could void the user’s authority to operate this device.
PHILIPS Dynalite DMC4 UL DCM DyNet Communication Module - icon
2 Installation of a home and building automation and control system shall comply with HD 60364-4-41. The temperature limits and current-carrying capacities f
the communication wires specified in HD 384.5.523 shall not be exceeded.
PHILIPS Dynalite DMC4 UL DCM DyNet Communication Module - icon
2 This Class B digital apparatus complies with Canadian ICES-003: CAN ICES-3(B)/NMB-3(B). Cet appareil numerique de la classe B est conforme a la norme NMB- 003 du Canada: CAN ICES-3(B)/NMB-3(B).
© 2021 Signify Holding. All rights reserved. Specifications are subject to change without notice. No representation or warranty as to the accuracy or completeness of the information included herein is given and any liability for any action in reliance thereon is disclaimed. Philips and the Philips Shield Emblem have registered trademarks of  Koninklijke Philips N.V. All other trademarks are owned by Signify Holding or their respective owners.

AZZ 432 0821 R14
www.lighting.philips.com/dynalie

Documents / Resources

| PHILIPS Dynalite DMC4 UL DCM-DyNet Communication Module [pdf] Instruction Manual
Dynalite DMC4 UL, DCM-DyNet, Communication Module, DCM-DyNet Communication Module, Dynalite DMC4 UL DCM-DyNet Communication Module
---|---

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals