Lochinvar DHW570-1600 ARMOR Condensing Water Heater User Guide
- June 17, 2024
- Lochinvar
Table of Contents
PREASSEMBLED COMPONENTS FOR EASY INSTALLATION
DESIGNED TO MAXIMIZE AVAILABLE SPACE
SINGLE SOURCE OF RESPONSIBILITY
DESIGNED AND ASSEMBLED IN-HOUSE BY INDUSTRY PROFESSIONALS
High Efficiency Commercial DHW Package Solutions
The ARMOR Commercial Condensing Water Heater features Stainless Steel heat
exchanger technology to deliver up to 98% Thermal Efficiency.
To optimize system foot print, deliver the best system appearance, and reduce
installation costs, Lochinvar has created standard water heater Package
Solutions for your application. Each package is factory assembled and tested
to deliver clean, efficiently heated, potable water. All packages include a
welded channel iron skid for the water heaters and storage tank which provide
easy and fast installation. Now more than ever, the ARMOR delivers a wide
range of commercial sizes and features while offering “green” technology that
building owners and facility managers desire.
TAINLESS STEEL CONDENSING HEAT EXCHANGER
The heart of the ARMOR is the advance316L Stainless Steel, condensing
heatexchanger built to ASME Section IV requirements. Constructed with
superiorgrade 316L Stainless Steel, the heat exchanger’s condensing design
will heawater at up to 98% Thermal Efficiency.
JACKETED AND INSULATED STORAGE TANKS
Lochinvar’s glass lined, jacketed, and insulated storage tanks have been
specifically engineered and constructed to provide a high volume supply of hot
water at a constant outlet temperature.
The unique Lock-Temp® baffle design is so effective that 80% of the storage
volume can be utilizeat the stored water temperature, regardless of the rate
of outlet water flow. The durable glass lining is molecularly fused to the
tank at 1600°F to assure long lasting protection against rust and corrosion
while providing clean, clear water. Large diameter, high capacity anode rods
inhibit interior tank corrosion to insure a long, trouble-free life.
ASME CONSTRUCTION
Constructed in accordance with the ASME Section IV standard. The vessels are
constructed for 125 PSI and for 210°F maximum water temperature.
ENERGY SAVING PERFORMANCE
Jacketed and insulated to meet the efficiency requirements of the latest edition of the ASHRAE 90.1 Energy Efficiency Standard. The jacket is heavy gauge, galvanized metal, painted on both sides for an attractive appearance with aximum protection. The 2” of expanded foam insulation equals an R-value of R-13 and provides low standby energy loss for optimum performance and economy.
INTEGRATED SOLUTIONS TO SIMPLIFY YOUR GREATEST WATER HEATING CHALLENGES
- PRE-ENGINEERED, DESIGNED AND FABRICATED TO SERVICE A WIDE ARRAY OF APPLICATIONS
- WELDED STEEL BASE WITH FORKLIFT POCKETS FOR EASY PLACEMENT AND TRANSPORT
- WELDED SCH.40 STAINLESS STEEL SYSTEM PIPING
- ANSI FLANGED COLD WATER AND HOT WATER CONNECTIONS
- EXPANSION TANK SIZED FOR COMMON APPLICATIONS
- ALL COMPONENTS ISOLATED FOR EASY SERVICE AND MAINTENANCE
- SINGLE POINT ELECTRICAL WITH DISCONNECTS FOR HASSLE-FREE INSTALLATION
- ARMOR UNITS ARE FACTORY PROGRAMED FOR CASCADE OPERATION
- FACTORY SIZED CONSTANT SPEED BRONZE PUMPS
- FACTORY PRESSURE TESTED TO ENSURE A TROUBLE-FREE STARTUP
PACKAGED SOLUTIONS
For technical information call
800-722-2101. Lochinvar LLC reserves
the right to make product changes or improvements without prior notice.
Dimensions are approximate and should not be used for construction purposes.
PACKAGE STANDARD FEATURES
Pre-Engineered, Designed and Fabricated
Welded Steel Base with Forklift Pockets
Welded Sch.40 Stainless Steel Piping
ANSI Flanged Cold Water and Hot Water Connections
Throttling Valves on Heater Inlet and Outlet
Y-Strainers w/ Blow Down Valve (where applicab Expansion Tank
T&P Relief Valves Piped to 6″ Above Skid
All Components Isolated for Easy Breakaway
Manway on Front of Tank (where applicable)
Tank Drain Valve Single Point Electrical w/ Disconnects
Cascade Programming Constant Speed Bronze Pumps
Factory Pressure Tested for Leaks ASME Section IV Constructed Glass Lined Tank
125 psi Rated Storage Tank Magnesium Anode Rod Protected Storage Tank
Storage Tank Insulated to Meet ASHRAE 90.1 Requirements
5 Year Limited Storage Tank Warranty
ARMOR STANDARD FEATURES
Up To 98% Thermal Efficiency
Modulating Burner with 5:1 Turndown
Direct-Spark Ignition Low NOx Operation Sealed Combustion Low Gas Pressure
Operation
CON·X·US Remote Connect (DHW2500-3000)
Vertical & Horizontal Vent Termination
Category IV Venting up to 150 Feet (DHW2500-3000)
PVC, CPVC, Polypropylene or AL29-4C Vent Material
ASME Stainless Steel Heat Exchanger
Gasketless Design 160 psi Working Pressure On/Off Switch
Adjustable High Limit with Manual Reset
Automatic Reset High Limit
High & Low Gas Pressure Switches Flow Switch
Inlet & Outlet Temperature Sensors
ASME Temperature & Pressure Relief Valve
5 Year Limited Warranty (See Warranties for Details).
1 Year Warranty on Parts
SMART CONTROL FEATURES
Full-Color Touchscreen LCD Display (DHW2500-3000)
Multi Color Graphic LCD Display (DHW570-1600)
Building Automation Integration With 0-10 VDC Input
Password Security Low Water Flow Safety Control & Indication
Inlet & Outlet Temperature Readout
Freeze Protection Service Reminder Time Clock
Data Logging Hours Running
Ignition Attempts
Last 10 Lockouts
Programmable System Efficiency Optimizers Night Setback
High Voltage Terminal Strip 120V/1PH/60 Hz
Water Heater Pump Control Contacts
Building Recirculation Pump Control Contacts
Low Voltage Terminal Strip 24 VAC Auxiliary Device Relay
Auxiliary Proving Switch Contacts Alarm Contacts
Runtime Contacts Tank Thermostat Contacts
Tank Sensor Contacts Cascade Contacts
Flow Switch Contacts or technical information call
800-722-2101. Lochinvar, LLC reserves
the right to make product changes or improvements without prior notice.
Lochinvar, LLC
300 Maddox Simpson Parkway
Lebanon, Tennessee 37090
P: 615.889.8900
F: 615.547.1000
Lochinvar.com DHW-01
500 – 11/2023 Printed in U.S.A.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>