Embr Wave Wearable Body Cooling Device User Manual

: June 17, 2024
: Embr

Table of Contents

Wave Wearable Body Cooling Device
SET IT TO CHARGE
DOWNLOAD THE MOBILE APP
WEAR IT INSIDE YOUR WRIST
FEEL THE WAVES
TIPS FOR COOLING
IMPORTANT SAFETY INSTRUCTIONS
WARRANTY INFORMATION
Documents / Resources

Wearable Body Cooling Device
User Manual

Wave Wearable Body Cooling Device

WELCOME!
The following instructions will help you get to know your Embr Wave and use it to its full potential. Please read and keep this User Manual and take the time to carefully read and follow the Important Safety Instructions.
Welcome to Embr Wave!
Embr Wave is a thermal wristband that provides thermal comfort at the touch of a button.
What’s in the box?
Your Embr Wave box includes:

Embr Wave thermal wristband
Micro USB charging cable
Storage pouch
Quickstart guide
Context card
Safety& warranty information

SET IT TO CHARGE

First, remove the protective film.
Next, fully charge Embr Wave using the included micro USB cable and a wall charger (not supplied).
The charging port is located behind the magnetic wristband: you can loosen the wristband to access it. The light bar will shine solid green when it’s done charging after 1.5 hours. When fully charged, Embr Wave will have a battery life of 20-50 sessions in Quick Mode.
Note: Before charging, be sure the product is at room temperature, between 0ºC and 45ºC.

DOWNLOAD THE MOBILE APP

While it’s charging, download the Embr Wave mobile app and follow the on- screen instructions to set up your device.
Once your device is set up and charged, you can use the app to select preset modes that offer longer duration and specially designed waveforms (like Extended Mode for 30-minute sessions), have greater temperature control, and get access to software updates.

Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc., registered in the U.S. and other countries.
Google Play and the Google Play logo are trademarks of Google LLC.

WEAR IT INSIDE YOUR WRIST

Once it’s charged, place Embr Wave on the inside of either wrist, lifting the magnetic clasp and loosening the band to put it on. It should be snug but not uncomfortably tight.
The inner wrist is an especially temperaturesensitive area, so Embr Wave is more effective there.
If the warming or cooling sessions feel too intense for you, you can wear Embr Wave on the outside of your wrist.
ACTIVATE EMBR WAVE Wake up Embr Wave by clicking either side of the light bar: you’ll see the red& blue standby lights turn on.
Start cooling or warming by clicking the blue or red side once. The device will start cooling or warming instantly.
Tip: You can also control your Embr Wave from the mobile app.
For best results, use Embr Wave when you’re just starting to feel uncomfortable. Try it next time you’re overheated, feeling stressed, or chilly at your office.

FEEL THE WAVES

The device will precisely cool or warm your wrist, pausing for several seconds before ramping up again in waves.
Gently focus on the temperature.
Because the human body is more sensitive to temperature contrast than to static temperatures, Embr Wave cools and warms in rhythmic waves.
Now let Embr Wave take effect.
In the background, these temperature waves are balancing your body to help you naturally feel more comfortable. You will feel more comfortable in minutes.
Want a longer duration?
By default, the cooling and warming are both set to Quick Mode, in which each session lasts 3-5 minutes before returning to standby. If you prefer a longer session, you can also set your desired duration in the Embr Wave mobile app.
Starting a new session
If you want, you can then start a new session by waking up your Embr Wave by clicking the light bar, and then clicking the blue or red side: the device will return to your last used temperature level and mode.
ADJUSTING THE TEMPERATURE
There are multiple levels of warming and cooling. We’ve set the temperature to a level that feels best to most users, but you should adjust the level to find what feels most pleasant to you.
To adjust the temperature level, click the left or right side of the light bar.
For even more precise calibration, you can hold down the left side of the light bar to lower the temperature, or the right side to raise it. During warming, the light bar will glow red. During cooling, it will glow blue.
UNDERSTANDING THE LIGHT BAR
The light bar will indicate the status of your Embr Wave. Embr Wave
Wearable Body Cooling Device - LIGHT BAR THE LIGHT BAR, CONTINUED
Low battery
When the light bar flashes orange, Embr Wave is running low on battery.
Fully charged
When Embr Wave is done charging, the light bar will shine solid green.
Too cold to start
If the device is too cold, a yellow and cyan light pattern will slowly fade in and out to indicate that it needs to warm up— wear it against your skin for a few seconds, and you should be all set!
Too hot to start
If Embr Wave is too hot to start a session, a yellow and orange light pattern will slowly glow. Let it rest 3-5 minutes, or until the light bar turns back off.
Overheated
If your device overheats, the entire light bar will flash yellow and red. If this happens, wait to use your Embr Wave until it has cooled down.

TIPS FOR COOLING

During cooling, you’ll notice that the aluminum top gradually gets warm as it pulls heat away from your body. For best results:

Think of Embr Wave as a friend who is working hard for you and may need rest for 3-5 minutes between cooling sessions.
Let Embr Wave breathe! Leave the metal body uncovered to facilitate heat dissipation (e.g., not under your sleeve).
Wear the wristband loosely while you aren’t actively cooling.

Note: During warming, it’s the opposite: you’ll want to keep as much heat in as possible! So for best results, cover your device with your sleeve while warming.

IMPORTANT SAFETY INSTRUCTIONS

Embr Wave is designed to provide thermal comfort, not to regulate core body temperature. It is intended for use in moderate environments, and it is not designed as a replacement for clothing, air conditioning, or other traditional temperature solutions.
Embr Wave is a consumer product and not a medical device intended to diagnose, treat, or cure any disease. If you have any medical condition that you believe could be affected by Embr Wave, consult with your physician prior to using the product. If you experience adverse reactions, immediately remove the system, stop using it, and consult with your physician. Embr Wave is designed to be worn on the wrist only. Different parts of the body have different thermal sensitivities. Use Embr Wave on other body locations at your own risk.
The product’s warming feature should be used with care and common sense. DO NOT use Embr Wave in temperature settings that feel painful or uncomfortable. Exposure to hot surfaces may cause pain or skin damage.
DO NOT use Embr Wave continuously for more than 4 hours. Using the heating mode continuously for long periods may result in the skin turning red due to prolonged heat exposure.
This product contains magnetic material. Consult your physician on whether this might affect your implantable medical
device.
DO NOT submerge or expose for extended periods to water or wear while participating in water sports, i.e. swimming, waterskiing, surfing, etc.
IMPORTANT SAFETY INSTRUCTIONS
Do NOT use Embr Wave if you have open wounds, sores, rashes, infection, or inflamed skin in or around the area of contact. Consult with your doctor before using Embr Wave if you are pregnant. Keep this system out of the reach of children. The Embr Wave band contains some nickel. Nickel exposure from these materials is unlikely, but customers with known nickel allergies should be attentive when wearing the product until they can determine they are not experiencing an allergic reaction.
To reduce the risk of fire or electric shock, DO NOT expose the product to rain or moisture. DO NOT subject the product to mechanical shock. DO NOT expose products containing batteries to excessive heat (e.g. from storage in direct sunlight, fire or the like).
DO NOT expose this apparatus to dripping or splashing, and do not place objects filled with liquids such as vases, on or near the apparatus. As with any electronic products, use care not to spill liquids into any part of the system. Liquids can cause failure and/or a fire hazard.
Charging temperature range: 0-45ºC. Discharging temperature range: 0-60ºC. Use this product only with an agency approved power supply which meets local regulatory requirements (e.g. UL, CSA, VDE, CCC). DO NOT leave the product on prolonged charge when not in use.
The product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the environment. For more information on disposal and recycling of this product, contact your local municipality or disposal service.

WARRANTY INFORMATION

(a) Limited Warranty. The limited warranty set forth herein applies only to the Buyer, may be acted upon only by the Buyer, and may not be assigned, sold or transferred to any third party. Embr warrants only to the Buyer that, for a period of one (1) year from delivery, the Product shall substantially conform to Embr’s published specifications as of the date of shipment. The limited warranty herein shall not apply to (i) any Product that has been customized, altered or repaired by any person or entity other than personnel of Embr or personnel specifically authorized by Embr, (ii) any Product that has been subjected to abuse, misuse, damage, neglect, or accident beyond Embr’s published limitations for the Product or other causes external to the Products (including, without limitation, environmental conditions and power conditions), (iii) use of the Product in combination with products or software not supplied by Embr, (iv) any use or operation of the Product other than in accordance with Embr’s then-current published specifications and instructions for the Product, or (v) any non-conformities or defects notified by Buyer to Seller with respect to a Product after the expiration of the applicable warranty period for such Product.
(b) Remedies. Buyer’s sole and exclusive remedy and Seller’s sole and exclusive liability for a breach of this limited warranty shall be, at Seller’s option, Seller’s use of its commercially reasonable efforts to repair or replace the non-conforming Product. If Embr is unable, after reasonable efforts, to repair or replace such substantially non-conforming Products, Embr, may, at its sole discretion, elect to refund of an amount not to exceed the actual payments received by Embr for such Product(s). Buyer shall not return any
Product to Embr without an Embr-issued RMA number; Buyer shall contact Embr at hello@embrlabs.com to request a return and to obtain directions for returns of Products. Shipping costs and the risk of loss for a returned defective Product with a proper RMA number shall be borne by Embr, and Embr shall assume the risk of loss while the Product is in the Embr facility. Products that are repaired or replaced by Embr shall be covered by this limited warranty for the remaining warranty period for such original Product.
13. WARRANTY INFORMATION
Disclaimers. THIS LIMITED WARRANTY IS IN LIEU OF ANY OTHER WARRANTY, WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT) WITH RESPECT TO THE PRODUCTS, THE MANUFACTURE, SALE, SUPPLYING OR FAILURE OR DELAY IN SUPPLYING OF THE PRODUCTS, SERVICES RELATED THERETO OR THE USE, RESULTS OR DISPOSITION OF THE PRODUCTS. EMBR EXPRESSLY DISCLAIMS ALL WARRANTIES (WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL) WITH RESPECT TO THE RESULTS OBTAINED FROM THE PRODUCT. OUR PRODUCTS DO NOT PROTECT YOU FROM OVERHEATING OR ANY OTHER HEALTH OR SAFETY RISKS. YOU ARE SOLELY RESPONSIBLE FOR MAINTAINING YOUR OWN HEALTH AND SAFETY.
REGULATORY INFORMATION
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Changes or modifications not expressly approved by Embr Labs could void the user’s authority to operate the equipment.
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
This product conforms to all applicable EU directive requirements.
Made and imported by Embr Labs, Inc
285 Washington St Ste C, Somerville MA, 02143 USA embrlabs.com
Need help?
Find answers to frequently asked questions, schedule a phone call, or reach our team via chat or email at: support.embrlabs.com
You can always find the latest version of this user manual at: manual.embrlabs.com

Model: Embr Wave
FCC ID 2ANTG-WAVE1
IC: 23206-WAVE1

Documents / Resources

| Embr Wave Wearable Body Cooling Device [pdf] User Manual
Wave Wearable Body Cooling Device, Wave, Wearable Body Cooling Device, Body Cooling Device, Cooling Device, Device
---|---