/

/

)

Start listening

1 Press B SRC repeatedly to select SIRIUS XM.

2 Press BAND repeatedly to select a band.

3 Press

.

” ” indicator lights up.

4 Turn the volume knob to select a category, then press the knob.

If “ALL CHANNELS” is selected, all the available channels will be shown.

5 Turn the volume knob to select a channel, then press the knob.

(or)

Press S / T to search for a channel manually.

· Pressing and holding S / T changes the channel rapidly.

If a locked channel or a mature channel is selected, a pass code input screen appears. Enter the pass code to receive the channel. (Page 19)

Direct Access Tuning (using the remote control)
1 Press DIRECT to enter Direct Access Tuning. 2 Press the number buttons to enter a channel number. 3 Press ENT IW to search for the channel.
· To cancel, press or DIRECT. · If no operation is done for 10 seconds after step 2, Direct Access Tuning is
automatically canceled.

Search

ENGLISH 17

SiriusXM® Radio (for

/

/

/

/

/

)

SiriusXM Keymode
Press and hold the volume knob to change the keymode (channel or replay). (Default: Channel keymode) ” ” indicator lights up when replay keymode is selected.

When channel keymode is selected…

To

On the faceplate

On the remote control

Select a channel

Press S / T.

Press S / T (+).

Change a channel rapidly
Store a channel of the current band
Select a stored channel of the current band

Press and hold S / T.

Press and hold S / T (+).

Press and hold one of the number buttons (1 to 6).

( Not available )

Press one of the number Press one of the number

buttons (1 to 6).

buttons (1 to 6).

When replay keymode is selected…

To

On the faceplate

Play back/pause

Press 6 IW.

Skip backward/ forward

Press S / T.

Rewind/Fast-forward Press and hold S / T.

Go to Live

Press 1.

On the remote control Press ENT IW. Press S / T (+).
Press and hold S / T (+). Press 1.

SmartFavorites and TuneStartTM
User stored channels are recognized as SmartFavorite channels. The SiriusXM Vehicle Tuner automatically buffers the broadcast content in the background. · SmartFavorites feature is available with SXV200 or later SiriusXM Vehicle
Tuner. SXV300 (and later) SiriusXM Vehicle Tuner can use all 18 stored channels as SmartFavorites.
The SXV200 SiriusXM Vehicle Tuner can use 6 stored channels from the current band as SmartFavorites.
When you select a SmartFavorite channel, you can rewind and replay up to 30 minutes of any of the missed news, talk, sports or music content. · Playback starts from the beginning of the song if [TUNE START] is set to [ON] (page 19) for most music channels stored as a SmartFavorite.
Press one of the number buttons (1 to 6) to select a stored channel.
TuneScanTM
You can get a short preview of the songs that you have missed on each of your SmartFavorites music channels or a music channel currently tuned into.
Press and hold BAND to start scanning the first 6 seconds of the recorded music contents.
· To listen to the current song, press the volume knob to stop scanning. The unit continues playing the current song.
· To select the previous/next song, press S / T. · To cancel scanning, press and hold the volume knob. Playback returns to
the channel before you entered TuneScan.

18 ENGLISH

Search

SiriusXM® Radio (for

/

/

/

/

/

)

SiriusXM settings

1 Press the volume knob to enter [FUNCTION].

2 Turn the volume knob to select an item (see the following table), then

press the knob.

3 Repeat step 2 until the desired item is selected/activated or follow the

instructions stated on the selected item.

4 Press and hold

to exit.

To return to the previous setting item, press

.

Default: [XX] [SIRIUS XM] [SEEK MODE] [CHANNEL LOCK] [CODE SET]

Selects the tuning method for S / T buttons when pressed. [CHANNEL]: Manually search for a channel. ; [PRESET]: Search for a preset channel of the selected band.
To unlock settings: 1 Turn the volume knob to select a number. 2 Press S / T to move to the entry position. 3 Repeat step 1 and step 2 to enter the current pass code.
(Initial pass code is 0000.) 4 Press the volume knob to confirm.
1 Turn the volume knob to select a number. 2 Press S / T to move to the entry position. 3 Repeat step 1 and step 2 to enter a new 4-digit pass code. 4 Press the volume knob to confirm. 5 Repeat step 1 to step 4 to reconfirm the pass code. · Make a note of the new pass code to enter channel lock settings for next
time.

[LOCK SETTING] [MATURE CH]: Selects the SiriusXM-defined lock setting. ; [USER DEFINED]: Selects the individual channels the user wants to lock. ; OFF: Cancels. [CHANNEL EDIT]*1

1 Turn the volume knob to select a category, then press the knob.

2 Turn the volume knob to select a channel you want to lock, then

press the knob.

“L” appears in front of the channel number.

3 Press and hold

to exit.

[TUNE START]*2 [ON]: All qualified music channels in the SmartFavorites will start playback from the beginning of the song. ; OFF: Cancels. [SIGNAL LEVEL]

Shows the strength ([NO SIGNAL]/[WEAK]/[GOOD]/[STRONG]) of the current received signal.

[BUFFER USAGE]

Shows the memory usage ([0%] to [100%]) for Replay buffer.

1 Displayed only when [LOCK SETTING] is set to [USER DEFINED]. 2 Available only if the connected SiriusXM Vehicle Tuner is SXV200 or later which supports
SmartFavorites.

Search

ENGLISH 19

AUX
You can listen to music from a portable audio player via the auxiliary input jack.
Preparation: Select [ON] for [BUILT-IN AUX] in [SOURCE SELECT]. (Page 6)

Start listening

1 Connect a portable audio player (commercially available).

Auxiliary input jack

Portable audio player

3.5 mm (1/8″) stereo mini plug with “L” shaped connector (commercially available)
2 Press B SRC repeatedly to select AUX. 3 Turn on the portable audio player and start playback.

Set the name of the external device

While listening to a portable audio player connected to the unit…

1 Press the volume knob to enter [FUNCTION].

2 Turn the volume knob to select [SYSTEM], then press the knob.

3 Turn the volume knob to select [AUX NAME SET], then press the knob.

4 Turn the volume knob to select an item, then press the knob.

[AUX] (default)/[DVD]/[PORTABLE]/[GAME]/[VIDEO]/[TV]

5 Press and hold

to exit.

To return to the previous setting item, press

.

Using Other Applications
KENWOOD Remote application
You can control the KENWOOD car receiver from iPhone/iPod touch (via Bluetooth or via USB input terminal) or Android device (via Bluetooth) using KENWOOD Remote application. · For more information, visit http://www.kenwood.com/cs/ce/.
Preparation: Install the latest version of KENWOOD Remote application on your device before connecting.

Start using KENWOOD Remote application

1 Start up the KENWOOD Remote application on your device. 2 Connect your device.
· For Android device: Pair the Android device with this unit via Bluetooth. (Page 22)
· For iPhone/iPod touch: Connect iPhone/iPod touch to the USB input terminal. (Page 11) (or) Pair the iPhone/iPod touch with this unit via Bluetooth. (Page 22) (Make sure the USB input terminal is not connected to any device.)
3 Select the device to use from the [FUNCTION] menu. See “Settings to use KENWOOD Remote application” on page 21. By default, [ANDROID] is selected. To use iPhone/iPod touch, select [YES] for [IOS].

· For

/

/

/

/

/

, “R.APP” indicator lights up when KENWOOD Remote

application is connected.

20 ENGLISH

Search

Using Other Applications

Settings to use KENWOOD Remote application

1 Press the volume knob to enter [FUNCTION].

2 Turn the volume knob to select an item (see the following table), then

press the knob.

3 Repeat step 2 until the desired item is selected/activated.

4 Press and hold

to exit.

To return to the previous setting item, press

.

[STATUS]

Shows the status of the selected device. [IOS CONNECTED]: You are able to use the application using the iPhone/ iPod touch connected via Bluetooth or USB input terminal. [IOS NOT CONNECTED]: No iOS device is connected to use the application. [ANDROID CONNECTED]: You are able to use the application using the Android device connected via Bluetooth. [ANDROID NOT CONNECTED]: No Android device is connected to use the application.

Default: [XX] [REMOTE APP] [SELECT]

Selects the device ([IOS] or [ANDROID]) to use the application.

[IOS] [ANDROID] [ANDROID LIST] [YES]: Selects iPhone/iPod touch to use the application via Bluetooth or connected via USB input terminal. ; [NO]: Cancels. If [IOS] is selected, select iPod BT source (or iPod USB source if your iPhone/ iPod touch is connected via USB input terminal) to activate the application. · The connectivity of the application will be interrupted or disconnected if:
­ You change from iPod BT source to any playback source connected via the USB input terminal.
­ You change from iPod USB source to iPod BT source.
[YES]: Selects Android device to use the application via Bluetooth. ; [NO]: Cancels.
Selects the Android device to use from the list. · Displayed only when [ANDROID] of [SELECT] is set to [YES].

Tuneln Radio/Tuneln Radio Pro While listening to TuneIn Radio or TuneIn Radio Pro, connect the iPhone/ iPod touch to the USB input terminal of the unit so that the unit will output the sound from these applications.

Search

ENGLISH 21

Bluetooth®

· Depending on the Bluetooth version, operating system and the firmware version of your mobile phone, Bluetooth features may not work with this unit.
· Be sure to turn on the Bluetooth function of the device to make the following operations.
· Signal conditions vary depending on the surroundings.
Bluetooth — Connection
Supported Bluetooth profiles ­ Hands-Free Profile (HFP) ­ Advanced Audio Distribution Profile (A2DP) ­ Audio/Video Remote Control Profile (AVRCP) ­ Serial Port Profile (SPP) ­ Phonebook Access Profile (PBAP)
Supported Bluetooth codecs ­ Sub Band Codec (SBC) ­ Advanced Audio Coding (AAC)

Connect the microphone

Rear panel

Microphone input jack

Microphone (supplied)

Secure using cord clamps (not supplied) if necessary.

Adjust the microphone angle

Pair and connect a Bluetooth device for the first time
1 Press B SRC to turn on the unit. 2 Search and select the name of your receiver (“KDC-X704″/
“KDC-X304″/”KDC-BT778HD”/”KDC-BT378U”/”KDC-BT360U”/ “KDC-BT34″/”KDC-BT278U ”/”KDC-MP378BT”/”KMR-D378BT”) on the Bluetooth device. “PAIRING” “PASS XXXXXX” “Device name” “PRESS” “VOLUME KNOB” appears on the display. · For some Bluetooth devices, you may need to enter the Personal
Identification Number (PIN) code immediately after searching. 3 Press the volume knob to start pairing.
“PAIRING OK” appears when pairing is completed.

Once pairing is completed, Bluetooth connection is established

automatically.

·

/

/

/

/

/

: “BT1” and/or “BT2″ indicator on the faceplate lights up.

” ” indicator lights up to show the strength of the battery and signal of

the connected device.

·

/

/

: “BT1” and/or “BT2” indicator

on the display window lights up.

· This unit supports Secure Simple Pairing (SSP). · Up to five devices can be registered (paired) in total. · Once the pairing is completed, the Bluetooth device will remain registered
in the unit even if you reset the unit. To delete the paired device, see [DEVICE DELETE] on page 26. · A maximum of two Bluetooth phones and one Bluetooth audio device can be connected at any time. To connect or disconnect the registered device, see [PHONE SELECT] or [AUDIO SELECT] in [BT MODE]. (Page 26) However, while in BT AUDIO source, you can connect to five Bluetooth audio devices and switch between these five devices. (Page 27) · Some Bluetooth devices may not automatically connect to the unit after pairing. Connect the device to the unit manually.

22 ENGLISH

Search

Bluetooth®
· Refer to the instruction manual of the Bluetooth device for more information.

The following operations may differ or be unavailable depending on the connected phone.

Auto Pairing When you connect iPhone/iPod touch to the USB input terminal, pairing request (via Bluetooth) is automatically activated if [AUTO PAIRING] is set to [ON]. (Page 26) Press the volume knob to pair once you have confirmed the device name.
Bluetooth — Mobile phone

Receive a call

When there is an incoming call:

·

/

/

/

/

/

:

[ZONE 2] illuminates in green color and flashes.

· The unit answers the call automatically if [AUTO ANSWER] is set to a selected

time. (Page 24)

During a call:

·

/

/

/

/

/

:

[ZONE 1] illuminates according to the settings made for [DISPLAY]

(page 33) and [ZONE 2] illuminates in green color.

· If you turn off the unit or detach the faceplate, Bluetooth is disconnected.

To

On the faceplate

First incoming call…

Answer a call

Press or the volume knob or one of the number buttons (1 to 6).

Reject a call

Press

.

End a call

Press

.

While talking on the first incoming call…

Answer another incoming call and hold the current call

Press .

Reject another incoming Press

.

call

While having two active calls…

End current call and activate held call

Press

.

Swap between the current call and held call

Press .

Adjust the phone volume*1 [00] to [35] (Default: [15])

Turn the volume knob during a call.

Switch between handsfree and private talk modes*3

Press 6 IW during a call.

1, 2, *3: See page 24.

Search

On the remote control Press .
Press . Press . Press . Press .
Press . Press . Press VOL *2 or VOL during a call. ( Not available )
ENGLISH 23

Bluetooth®
1 This adjustment will not affect the volume of the other sources. 2 Press and hold VOL to continuously increase the volume to 15. *3 Operations may vary according to the connected Bluetooth device.

Improve the voice quality

While talking on the phone…

1 Press the volume knob to enter [FUNCTION].

2 Turn the volume knob to select an item (see the following table), then

press the knob.

3 Repeat step 2 until the desired item is selected or activated.

4 Press and hold

to exit.

To return to the previous setting item, press

.

[MIC GAIN] [NR LEVEL] [ECHO CANCEL]

Default: [XX] [LEVEL ­10] to [LEVEL +10] ([LEVEL ­4]): The sensitivity of the microphone increases as the number increases.
[LEVEL ­5] to [LEVEL +5] ([LEVEL 0]): Adjust the noise reduction level until the least noise is being heard during a phone conversation.
[LEVEL ­5] to [LEVEL +5] ([LEVEL 0]): Adjust the echo cancellation delay time until the least echo is being heard during a phone conversation.

Make the setting for answering a call

1 Press to enter Bluetooth mode.

2 Turn the volume knob to select [SETTINGS], then press the knob.

3 Turn the volume knob to select [AUTO ANSWER], then press the knob.

4 Turn the volume knob to select the time (in seconds) for the unit to

answer the call automatically, then press the knob.

[01] to [30], or select OFF to cancels. (Default: OFF)

5 Press and hold

to exit.

To return to the previous setting item, press

.

Make a call

You can make a call from the call history, phonebook, or dialing the number. Call by voice is also possible if your mobile phone has the feature.

1 Press to enter Bluetooth mode.

“(First device name)” appears.

· If two Bluetooth phones are connected, press again to switch to the

other phone.

“(Second device name)” appears.

2 Turn the volume knob to select an item (see the following table), then

press the knob.

3 Repeat step 2 until the desired item is selected/activated or follow the

instructions stated on the selected item.

4 Press and hold

to exit.

To return to the previous setting item, press

.

[CALL HISTORY]

(Applicable only if the phone supports PBAP.) 1 Press the volume knob to select a name or a phone number.
· “I” indicates call received, “O” indicates call made, “M” indicates call missed.
· Press DISP to change the display category (NUMBER or NAME). · “NO DATA” appears if there is no recorded call history or call number. 2 Press the volume knob to call.

24 ENGLISH

Search

Bluetooth®

[PHONE BOOK]

(Applicable only if the phone supports PBAP.) 1 Turn the volume knob quickly to enter alphabet search mode (if the
phonebook contains many contacts). The first menu (ABCDEFGHIJK) appears. · To go to the other menu (LMNOPQRSTUV or WXYZ1 ), press 2 /
1 . · To select the desired first letter, turn the volume knob or press
S / T, then press the knob. Select “1” to search with numbers and select ” ” to search with symbols. 2 Turn the volume knob to select a name, then press the knob. 3 Turn the volume knob to select a phone number, then press the knob to call.

· For using phonebook with this unit, make sure to allow access to or transfer from your smartphone. Depending on the connected phone, the process may be different.
· Contacts are categorized as: HM (home), OF (office), MO (mobile), OT (other), GE (general)
· This unit can display only non-accent letters. (Accent letters such as “Ú” are shown as “U”.)

[NUMBER DIAL] 1 Turn the volume knob to select a number (0 to 9) or character ( , #, +). 2 Press S / T to move the entry position. Repeat step 1 and step 2 until you finish entering the phone number. 3 Press the volume knob to call.

(or using the remote control) 1 Press the number buttons (0 to 9) to enter the phone number. 2 Press to call.

[VOICE]

Speak the name of the contact you want to call or the voice command to control the phone functions. (See also the following “Make a call using voice recognition”.)

[LOW]/[MID]/[FULL]: Shows the strength of the battery. [NO SIGNAL]/[LOW]/[MID]/[MAX]: Shows the strength of the current received signal.

• Functionality depends on the type of the phone used.

Make a call using voice recognition
1 Press and hold to activate the voice recognition of the connected phone.
2 Speak the name of the contact you want to call or the voice command to control the phone functions.
· Supported Voice Recognition features vary for each phone. Refer to the instruction manual of the connected phone for details.
Store a contact in memory
You can store up to 6 contacts into the number buttons (1 to 6).
1 Press to enter Bluetooth mode. 2 Turn the volume knob to select [CALL HISTORY], [PHONE BOOK] or
[NUMBER DIAL], then press the knob. 3 Turn the volume knob to select a contact or enter a phone number.
If a contact is selected, press the volume knob to show the phone number. 4 Press and hold one of the number buttons (1 to 6). “STORED” appears when the contact is stored.
To erase a contact from the preset memory, select [NUMBER DIAL] in step 2, store a blank number in step 3 and proceed to step 4.
Make a call to a registered number
1 Press to enter Bluetooth mode. 2 Press one of the number buttons (1 to 6). 3 Press the volume knob to call.
“NO MEMORY” appears if there is no contact stored.

Search

ENGLISH 25

Bluetooth®

Bluetooth mode settings

1 Press the volume knob to enter [FUNCTION].

2 Turn the volume knob to select an item (see the following table), then

press the knob.

3 Repeat step 2 until the desired item is selected/activated or follow the

instructions stated on the selected item.

4 Press and hold

to exit.

To return to the previous setting item, press

.

[BT MODE] [PHONE SELECT] [AUDIO SELECT] [DEVICE DELETE] [PIN CODE EDIT] (0000)
[RECONNECT] [AUTO PAIRING]

Default: [XX] Selects the phone or audio device to connect or disconnect. ” ” appears in front of the device name when connected. ” ” appears in front of the current playback audio device. · You can connect a maximum of two Bluetooth phones and one
Bluetooth audio device at a time.
1 Turn the volume knob to select a device to delete, then press the knob.
2 Turn the volume knob to select [YES] or [NO], then press the knob.
Changes the PIN code (up to 6 digits). 1 Turn the volume knob to select a number. 2 Press S / T to move the entry position.
Repeat step 1 and step 2 until you finish entering the PIN code. 3 Press the volume knob to confirm.
[ON]: The unit is automatically reconnect when the last connected Bluetooth device is within the connectable range. ; OFF: Cancels.
[ON]: The unit is automatically paired with the supported Bluetooth device (iPhone/iPod touch) when it is connected through USB input terminal. Depending on the operating system of the connected device, this function may not work. ;

[INITIALIZE] [YES]: Initializes all the Bluetooth settings (including stored pairing, phonebook, and etc.). ; [NO]: Cancels.

Bluetooth test mode
You can check the connectivity of the supported profile between the Bluetooth device and the unit. · Make sure there is no Bluetooth device paired.
1 Press and hold . “PLEASE PAIR YOUR PHONE PIN 0000” appears on the display.
2 Search and select the name of your receiver (“KDC-X704″/ “KDC-X304″/”KDC- BT778HD”/”KDC-BT378U”/”KDC-BT360U”/ “KDC-BT34″/”KDC-BT278U”/”KDC-MP378BT ”/”KMR-D378BT”) on the Bluetooth device.
3 Operate the Bluetooth device to confirm pairing. “TESTING” flashes on the display.
The connectivity result (OK or NG) appears after the test. PAIRING: Pairing status HF CNT: Hands-Free Profile (HFP) compatibility AUD CNT: Advanced Audio Distribution Profile (A2DP) compatibility PB DL: Phonebook Access profile (PBAP) compatibility
To cancel test mode, press and hold B SRC to turn off the unit.

26 ENGLISH

Search

Bluetooth®
Bluetooth — Audio

While in BT AUDIO source, you can connect to five Bluetooth audio devices and switch between these five devices.

Listen to the audio player via Bluetooth

1 Press B SRC repeatedly (or press SRC on the remote control) to select

BT AUDIO.

· For

/

: Pressing enters BT AUDIO

directly.

2 Operate the audio player via Bluetooth to start playback.

To
Play back/pause
Select group or folder Reverse skip/ Forward skip Reverse/Fast-forward

On the faceplate Press 6 IW. Press 2 / 1 . Press S / T.
Press and hold S / T.

On the remote control Press ENT IW. Press #FM+/ AM­. Press S / T (+).
Press and hold S / T (+).

To

On the faceplate

Repeat play

Press 4 repeatedly.

[ALL REPEAT], [FILE REPEAT], [GROUP REPEAT]*, [REPEAT OFF]

Random play

Press and hold 3 to select [ALL RANDOM] or [GROUP RANDOM]*.

· Press 3 to select [RANDOM OFF].

Select a file from a folder/list Refer to “Select a file to play” on page 13.

Switch between connected Bluetooth audio devices

Press 5. (Pressing the “Play” key on the connected device itself also causes switching of sound output from the device.)

• Depending on the connected device, some devices may not support this feature.

Operations and display indications may differ according to their availability on the connected device.

Listen to iPod/iPhone via Bluetooth
You can listen to the songs on the iPod/iPhone via Bluetooth on this unit.
Press B SRC repeatedly to select iPod BT.
· You can operate the iPod/iPhone in the same way as iPod/iPhone via USB input terminal. (Page 11)
· If you plug in an iPod/iPhone to the USB input terminal while listening to iPod BT source, the source automatically changes to iPod USB source. Press BSRC to select iPod BT source if the device is still connected via Bluetooth.

Search

ENGLISH 27

AMAZON ALEXA (for

/

/

/

Alexa is the cloud-based voice service developed by Amazon. You can ask Alexa to play music, get weather reports, traffic information, control smart home devices, shop on Amazon, search the internet, set reminders and more.

Preparation: · Create an account at <www.amazon.com>, or use the Alexa mobile
application. · After installing the latest version of the Alexa mobile application on your
device, log in using those credentials.
· Be sure to enable the internet connection on your smartphone.

Setup for the first time
For Android device 1 Pair your device with this unit via Bluetooth. (Page 22) 2 Start up the Alexa mobile application on your device. 3 Search and select the name of your receiver (“KDC-X704″/”KDC-X304″/
“KDC-BT778HD”/”KDC-BT378U”/”KDC-BT34″/”KDC-BT360U”/ “KMR-D378BT”) on SETUP section of the Alexa mobile application to complete a one-time setup process.

/

/

/

)

· The Alexa connection can be disconnected if: ­ A2DP profile is disconnected ­ Bluetooth is disconnected ­ This unit is turned off ­ Any other conditions depending on the connected device. To establish Alexa connection again, reconnect the A2DP profile.
· Alexa connection cannot be established again if you: ­ Reinstall Alexa mobile application ­ Delete the paired device and perform pairing again (for Android device) To establish Alexa connection again, perform the setup process again.
· You can check the Alexa connection from the Alexa mobile application. If the name of this unit appears on the screen of “ALL DEVICES”, you do not need to perform setup process again.

For iPhone/iPod touch 1 Pair your device with this unit via Bluetooth. (Page 22) 2 Start up the Alexa mobile application on your device. 3 Press on the unit to enter ALEXA source.
· You may also press B SRC repeatedly to select iPod BT source. 4 Search and select the name of your receiver (“KDC-X704″/”KDC-X304″/
“KDC-BT778HD”/”KDC-BT378U”/”KDC-BT34″/”KDC-BT360U”/ “KMR-D378BT”) on SETUP section of the Alexa mobile application to complete a one-time setup process.
Once the setup process is completed, the Alexa mobile application will establish a connection with this unit.

Basic operations
Once Alexa connection is established…
1 Press on the unit to speak with Alexa. The display shows: “ALEXA” “LISTENING…”.
2 Communicate with Alexa via the connected microphone. (Page 22) “THINKING…” appears when Alexa is processing your voice input. “SPEAKING…” appears while Alexa is responding to your voice input. “ALEXA” or display information such as playing time, song title, etc. appears while Alexa is in idle state.

28 ENGLISH

Search

AMAZON (for

/

/

/

/

ALEXA

/

/

)

· To return to the previous source before ALEXA, press B SRC (or press SRC on the remote control).
· To activate Alexa, press . · To cancel current listening state, press . · To cancel current thinking/speaking states and go to listening state,
press . · Only one Alexa connection can be connected at one time. · “DISCONNECTED” appears if the unit is disconnected from Alexa mobile
application or the Bluetooth connection is disconnected.

Start listening
While in Alexa idle state…
1 Press on the unit to activate Alexa. The display shows: “LISTENING…”.
2 Communicate with Alexa via the connected microphone. (Page 22) 3 During music playback in ALEXA source, you can perform the
following operations:

To Play back/pause Reverse skip/Forward skip

On the faceplate Press 6 IW. Press S / T.

On the remote control Press ENT IW. Press S / T (+).

During music playback, press to pause the music and activate Alexa. You can now start to communicate with Alexa.

Audio Settings

1 Press the volume knob to enter [FUNCTION].

2 Turn the volume knob to select an item (see the following table), then

press the knob.

3 Repeat step 2 until the desired item is selected or activated.

4 Press and hold

to exit.

(or using the remote control)
1 Press AUD to enter [AUDIO CONTROL]. 2 Press J/K to select an item, then press ENT IW.

To return to the previous setting item, press

.

Default: [XX] [AUDIO CONTROL] [SUB-W LEVEL] [LEVEL ­50] to [LEVEL +10] ([LEVEL 0]): Adjusts the subwoofer output level.

[EASY EQ]

Adjusts your own sound settings.

· The settings are stored to [USER] in [PRESET EQ].

· The settings made may affect the current settings of [MANUAL EQ].

[SW]: [LEVEL ­50] to [LEVEL +10]

(Default: [LEVEL 0] [BASS]: [LEVEL ­9] to [LEVEL +9] [LEVEL 0] [MID]: [LEVEL ­9] to [LEVEL +9] [LEVEL 0] [TRE]: [LEVEL ­9] to [LEVEL +9] [LEVEL 0])

Search

ENGLISH 29

Audio Settings

[MANUAL EQ]

Adjusts your own sound settings for each source. · The settings are stored to [USER] in [PRESET EQ]. · The settings made may affect the current settings of [EASY EQ].

[62.5HZ] [LEVEL] [LEVEL ­9] to [LEVEL +9] ([LEVEL 0]): Adjusts the level to memorize for each source. (Before making an adjustment, select the source you want to adjust.) [BASS EXTEND] [ON]: Turns on the extended bass. ; OFF: Cancels. [100HZ]/[160HZ]/ [250HZ]/[400HZ]/ [630HZ]/[1KHZ]/ [1.6KHZ]/[2.5KHZ]/ [4KHZ]/[6.3KHZ]/ [10KHZ]/[16KHZ] [LEVEL ­9] to [LEVEL +9] ([LEVEL 0]): Adjusts the level to memorize for each source. (Before making an adjustment, select the source you want to adjust.) [Q FACTOR] [1.35]/[1.50]/[2.00]: Adjusts the quality factor. [PRESET EQ] [NATURAL]/[ROCK]/[POPS]/[EASY]/[TOP40]/[JAZZ]/[POWERFUL]/ [USER]: Selects a preset equalizer suitable to the music genre. (Select [USER] to use the settings made in [EASY EQ] or [MANUAL EQ].) [BASS BOOST] [LV1] to [LV5]: Selects your preferred bass boost level. ; OFF: Cancels. [LOUDNESS] [LV1]/[LV2]: Selects your preferred low or high frequencies boost to produce a well-balanced sound at low volume. ; OFF: Cancels. [SUBWOOFER SET] [ON]: Turns on the subwoofer output. ; OFF: Cancels. [FADER] [R15] to [F15] ([0]): Adjusts the front and rear speaker output balance. [BALANCE] [L15] to [R15] ([0]): Adjusts the left and right speaker output balance. [VOLUME OFFSET] [­15] to [+6] ([0]): Presets the initial volume level of each source by comparing to the FM volume level. (Before adjustment, select the source you want to adjust.) [SOUND EFFECT] [SOUND RECNSTR] (Sound reconstruction) [SPACE ENHANCE] [SND REALIZER] [STAGE EQ] [DRIVE EQ] [SPEAKER SIZE] [FRONT] [REAR] [SUBWOOFER]

(Not applicable for RADIO source, AUX source and SIRIUS XM source.) [ON]: Creates realistic sound by compensating the high-frequency components and restoring the rise-time of the waveform that are lost in audio data compression. ; OFF: Cancels.

(Not applicable for RADIO source.) [SML]/[MED]/[LRG]: Virtually enhances the sound space. ; OFF: Cancels.

[LOW]/[MID]/[HI]: Virtually adjusts the sound position heard from the speakers. ; OFF: Cancels. [ON]: Boosts the frequency to reduce the noise heard from outside the car or running noise of the tyres. ; OFF: Cancels.

The frequency and slope settings are automatically set for the crossover of the selected speaker.

[SIZE] [3.5″]/[4″]/[4.75″]/[5″]/[6.5″]/[6.75″]/[7″]/[4×6]/ [5×7]/[6×8]/[6×9]/[7×10]: Selects according to the

connected speaker size for optimum performance.

[TWEETER] [SMALL]/[MIDDLE]/[LARGE]: Selects according to the size range of the connected tweeter for optimum performance. ; [NONE]: Not connected. [3.5″]/[4″]/[4.75″]/[5″]/[6.5″]/[6.75″]/[7″]/[4×6]/[5×7]/[6×8]/ [6×9]/[7×10]: Selects according to the connected speaker size for optimum performance. ; [NONE]: Not connected. [6.5″]/[8″]/[10″]/[12″]/[15″ OVER]: Selects according to the connected speaker size for optimum performance. ; [NONE]: Not connected.

30 ENGLISH

Search

Audio Settings

[X ` OVER] [TWEETER] [FRONT HPF] [REAR HPF] [SUBWOOFER LPF] [FRQ] [GAIN LEFT] [GAIN RIGHT] [F-HPF FRQ] [F-HPF SLOPE] [F-HPF GAIN] [R-HPF FRQ] [R-HPF SLOPE] [R-HPF GAIN] [SW LPF FRQ] [1KHZ]/[1.6KHZ]/[2.5KHZ]/[4KHZ]/[5KHZ]/ [6.3KHZ]/[8KHZ]/[10KHZ]/[12.5KHZ]: Adjusts the crossover frequency for the tweeter speaker.
[­8] to [0]: Adjusts the output volume of the left tweeter.
[­8] to [0]: Adjusts the output volume of the right tweeter.
[30HZ]/[40HZ]/[50HZ]/[60HZ]/[70HZ]/[80HZ]/ [90HZ]/[100HZ]/[120HZ]/[150HZ]/[180HZ]/ [220HZ]/[250HZ]: Adjusts the crossover frequency for the selected speakers (high pass filter). ; [THROUGH]: All signals are sent to the selected speakers.
[­6DB]/[­12DB]/[­18DB]/[­24DB]: Adjusts the crossover slope. (Selectable only if a setting other than [THROUGH] is selected for [F – HPF FRQ].)
[­8] to [0]: Adjusts the output volume of the selected speaker.
Configure the settings for the rear speakers similarly to the front speakers.
[30HZ]/[40HZ]/[50HZ]/[60HZ]/[70HZ]/[80HZ]/ [90HZ]/[100HZ]/[120HZ]/[150HZ]/[180HZ]/ [220HZ]/[250HZ]: Adjusts the crossover frequency for the subwoofer (low pass filter). ; [THROUGH]: All signals are sent to the subwoofer. [SW LPF SLOPE] [­6DB]/[­12DB]/[­18DB]/[­24DB]: Adjusts the crossover slope. (Selectable only if a setting other than [THROUGH] is selected for [SW LPF FRQ].) [SW LPF PHASE] [REVERSE] (180°)/[NORMAL] (0°): Selects the phase of the subwoofer output to be in line with the speaker output for optimum performance. [SW LPF GAIN] [­8] to [0]: Adjusts the output volume of the subwoofer. [DTA SETTINGS] [CAR SETTINGS]

For settings, see “Digital Time Alignment settings” on page 32.

· (For

/

/

)

The following item is selectable only if [SWITCH PREOUT] is set to [SUB-W]

(page 6):

­ [SUB-W LEVEL]

­ [SUBWOOFER SET]

­ [SW LEVEL] of [EASY EQ]

­ [SUBWOOFER] of [SPEAKER SIZE]

­ [SUBWOOFER LPF] of [X ` OVER]

­ [SUBWOOFER] of [DISTANCE] and [GAIN] in [DTA SETTINGS]

· The following item is selectable only if [SUBWOOFER SET] is set to [ON]

(page 30):

­ [SUB-W LEVEL]

­ [SW LEVEL] of [EASY EQ]

­ [SUBWOOFER] of [SPEAKER SIZE]

­ [SUBWOOFER LPF] of [X ` OVER]

­ [SUBWOOFER] of [DISTANCE] and [GAIN] in [DTA SETTINGS]

· The following item is selectable only if a setting other than [NONE] is

selected for [TWEETER], [REAR] and [SUBWOOFER] of [SPEAKER SIZE]:

­ [TWEETER], [REAR HPF], [SUBWOOFER LPF] of [X ` OVER]

Search

ENGLISH 31

Audio Settings

Digital Time Alignment settings
Digital Time Alignment sets the delay time of the speaker output to create a more suitable environment for your vehicle. · For more information, see the following “Determining the delay time
automatically”.

[DTA SETTINGS] [POSITION] [DISTANCE] [GAIN] [DTA RESET] [CAR SETTINGS] [CAR TYPE] [R-SP LOCATION]

Selects your listening position (reference point). [ALL]: Not compensating ; [FRONT RIGHT]: Front right seat ; [FRONT LEFT]: Front left seat ; [FRONT ALL]: Front seats
[0FT] to [20.01FT]: Fine adjust the distance to compensate. (Before making an adjustment, select the speaker you want to adjust.)
[­8DB] to [0DB]: Fine adjust the output volume of the selected speaker. (Before making an adjustment, select the speaker you want to adjust.)
[YES]: Resets the settings ([DISTANCE] and [GAIN]) of the selected [POSITION] to default. ; [NO]: Cancels.
Identify your car type and rear speaker location in order to make the adjustment for [DTA SETTINGS].

the type of vehicle. ; OFF: Not compensating.
Selects the location of the rear speakers in your vehicle to calculate the furthest distance from the listening position selected (reference point). · [DOOR]/[REAR DECK]: Selectable only when [CAR TYPE] is
selected as OFF, [COMPACT], [FULL SIZE CAR], [WAGON] or [SUV]. · [2ND ROW]/[3RD ROW]: Selectable only when [CAR TYPE] is selected as [MINIVAN] or [MINIVAN(LONG)].

· Before making an adjustment for [DISTANCE] and [GAIN] of [DTA SETTINGS], select the speaker you want to adjust: [FRONT LEFT]/[FRONT RIGHT]/[REAR LEFT]/[REAR RIGHT]/[SUBWOOFER] ­ You can only select [REAR LEFT], [REAR RIGHT] and [SUBWOOFER] if a setting other than [NONE] is selected for [REAR] and [SUBWOOFER] of [SPEAKER SIZE].
· [R-SP LOCATION] of [CAR SETTING] is selectable only if a setting other than [NONE] is selected for [REAR] of [SPEAKER SIZE].
Determining the delay time automatically
If you specify the distance from the currently set listening position to every speaker, the delay time will be automatically calculated. 1 Set [POSITION] and determine the listening
position as the reference point (the reference point for [FRONT ALL] will be the center between the right and left in the front seats). 2 Measure the distances from the reference point to the speakers. 3 Calculate the distance between the furthest speaker (subwoofer on the illustration) and other speakers. 4 Sets the [DISTANCE] calculated in step 3 for individual speakers. 5 Adjusts [GAIN] for individual speakers.
Example: When [FRONT ALL] is selected as the listening position.

32 ENGLISH

Search

Display Settings
Zone identification for color settings and brightness settings
Zone identification for brightness setting
Set the dimmer Press and hold DISP (DIM) to turn on or off the dimmer. · Once you press and hold this button, [DIMMER] setting (page 34) will be
overwritten.

Change the display settings

1 Press the volume knob to enter [FUNCTION].

2 Turn the volume knob to select an item (see the following table), then

press the knob.

3 Repeat step 2 until the desired item is selected/activated or follow the

instructions stated on the selected item.

4 Press and hold

to exit.

To return to the previous setting item, press

.

Default: [XX] [DISPLAY] [COLOR SELECT] (For

/

/

/

/

/

)

Selects illumination colors for [ALL ZONE], [ZONE 1] and [ZONE 2]

separately.

1 Select a zone. (See the illustration on left column.)

2 Select a preset color for the selected zone. (Page 34)

Default:

/

/

/

/

: [VARIABLE SCAN]

: [INITIAL COLOR]

To make your own color, select [CUSTOM R/G/B]. The color you have made will be stored in [CUSTOM R/G/B]. 1 Press the volume knob to enter the detailed color adjustment. 2 Press S/T to select the color ([R]/[G]/[B]) to adjust. 3 Turn the volume knob to adjust the level ([0] to [9]), then press the knob.

Search

ENGLISH 33

Display Settings

[DIMMER] [BRIGHTNESS] [TEXT SCROLL] [LEVEL METER]

Dims the illumination. [ON]: Dimmer is turned on. OFF: Dimmer is turned off. [DIMMER TIME]: Set the time to turn on dimmer and to turn off dimmer. 1 Turn the volume knob to adjust the [ON] time, then press the knob. 2 Turn the volume knob to adjust the OFF time, then press the knob.
Default: [ON]: [6:00PM] ; OFF: [6:00AM]

Sets the brightness for day and night separately. 1 [DAY]/[NIGHT]: Select day or night. 2 Select a zone. (See the illustration on page 33.) 3 [LVL00] to [LVL31]: Set the brightness level.

[ONCE]: Scrolls the display information once. ; [AUTO]: Repeats scrolling at 5-second intervals. ; OFF: Cancels.

(For

/

/

/

/

/

)

[ON]: Shows the level meter on the display window (as shown below). ; OFF: Cancels. [CLOCK] [CLOCK DISPLAY] (Except for

)

[ON]: The clock time is shown on the display even when the unit is turned

off. ; OFF: Cancels.

[DEMO MODE]

(Except for

)

[ON]: Activates the display demonstration automatically if no operation is

done for about 15 seconds. ; OFF: Deactivates.

Preset color: [INITIAL COLOR]/[VARIABLE SCAN]/[CUSTOM R/G/B]/[RED1]/[RED2]/[RED3]/[PURPLE1]/ [PURPLE2]/[PURPLE3]/[PURPLE4]/[BLUE1]/[BLUE2]/[BLUE3]/[SKYBLUE1]/[SKYBLUE2]/ [LIGHTBLUE]/[AQUA1]/[AQUA2]/[GREEN1]/[GREEN2]/[GREEN3]/[YELLOWGREEN1]/ [YELLOWGREEN2]/[YELLOW]/[ORANGE1]/[ORANGE2]/[ORANGERED]

Level meter

34 ENGLISH

Search

Learning Steering Remote Control (for
You can control the unit with the steering remote control keys on your vehicle. After connection, you can configure the control keys according to your preference. · You can only make this configuration if your vehicle is equipped with the
electrical steering remote control. · If the steering remote control in your car is not compatible, configuration
may not be completed and an error message may appear. (Page 44)

Make the connection Steering remote cable (supplied)

Bright green/red Purple/red

Rear panel

Learning steering remote input terminal

Gray/red

Connect to your vehicle’s steering remote harness. Contact your KENWOOD dealer for details.

Configure the control keys
1 Press BSRC repeatedly to enter STANDBY. 2 Press the volume knob to enter [FUNCTION]. 3 Turn the volume knob to select [SYSTEM], then press the knob. 4 Turn the volume knob to select [USER S.REMO], then press the knob. 5 Turn the volume knob to select [SET KEY], then press the knob.
A key list of 16 assignable keys appears. · [K## NONE]: No function has been assigned. 6 Turn the volume knob to select any key from the key list to assign the function, then press the knob. “PRESS KEY TO ASSIGN K##” appears.

)

7 Press and hold any control keys on your steering remote control

which you want to assign.

A list of key functions will appear on the display.

[NONE] (default)/[ATT]/[SEEK UP]/[SEEK DOWN]/[VOL UP]/[VOL DOWN]/[MODE]/ [ON HOOK]/[OFF HOOK]/[VOICE]/[ENTER]

8 Turn the volume knob to select a function to assign, then press the

knob.

The selected key function is assigned to the steering remote control key

you have selected in step 7.

The display returns to the key list as on step 5.

· [K## (Function)]: When certain function has been assigned to a key.

9 Repeat step 6 to step 8 to assign other control keys.

10 Press and hold

to exit.

Reassign the control keys
1 Press BSRC repeatedly to enter STANDBY. 2 Press the volume knob to enter [FUNCTION]. 3 Turn the volume knob to select [SYSTEM], then press the knob. 4 Turn the volume knob to select [USER S.REMO], then press the knob. 5 Turn the volume knob to select [RESET KEY], then press the knob. 6 Turn the volume knob to select [YES], then press the knob.
All the control keys will be reset. Selecting [NO] will cancel the operation.

When [FACTORY RESET] is set to [YES] (page 7), it will also reset the learning steering remote control.

To return to the previous setting item, press

.

Search

ENGLISH 35

Installation/Connection
This section is for the professional installer. For safety’s sake, leave wiring and mounting to professionals. Consult the car audio dealer.

Part list for installation (A) Faceplate (×1)

(B) Trim plate (×1)

WARNING · The unit can only be used with a 12 V DC power supply, negative ground. · Disconnect the battery’s negative terminal before wiring and mounting. · Do not connect Battery wire (yellow) and Ignition wire (red) to the car
chassis or Ground wire (black) to prevent a short circuit. · To prevent short circuit:
­ Insulate unconnected wires with vinyl tape. ­ Be sure to ground this unit to the car’s chassis again after installation. ­ Secure the wires with cable clamps and wrap vinyl tape around the wires
that comes into contact with metal parts to protect the wires.
CAUTION · Install this unit in the console of your vehicle. Do not touch the metal parts
of this unit during and shortly after use of the unit. Metal parts such as the heat sink and enclosure become hot. · Do not connect the wires of speakers to the car chassis or Ground wire (black), or connect them in parallel. · Mount the unit at an angle of less than 30°. · If your vehicle wiring harness does not have the ignition terminal, connect Ignition wire (red) to the terminal on the vehicle’s fuse box which provides 12 V DC power supply and is turned on and off by the ignition key. · Keep all cables away from heat dissipate metal parts. · After the unit is installed, check whether the brake lamps, blinkers, wipers, etc. on the car are working properly. · If the fuse blows, first make sure the wires are not touching car’s chassis, then replace the old fuse with one that has the same rating.

(C) Mounting sleeve (×1)

(D) Wiring harness (×1)

(E) Extraction key (×2)

(F) Screws* M5 × 7 mm (×4) M5 × 6 mm (×4) M4 × 8 mm (×1)

• Supplied for

/

/

/

/

.

Basic procedure 1 Remove the key from the ignition switch, then disconnect the
terminal of the car battery. 2 Connect the wires properly.
See “Wiring connection” on page 38. 3 Install the unit to your car.
See “Installing the unit (in-dash mounting)” on page 37. 4 Connect the terminal of the car battery. 5 Press BSRC to turn on the power. 6 Detach the faceplate and reset the unit within 5 seconds. (Page 4)

36 ENGLISH

Search

Installation/Connection
Installing the unit (in-dash mounting)

Installing the unit (without mounting sleeve) 1 Remove the mounting sleeve and trim plate from the unit. 2 Align the holes in the unit (on both sides) with the vehicle mounting
bracket and secure the unit with screws (supplied/commercially available).

Hook on the top side
Orientate the trim plate as illustrated
before fitting.

Do the required wiring. (Page 38)
Dashboard of your car

Use only the specified screws. Using wrong screws might damage the unit.
Removing the unit 1 Detach the faceplate. 2 Fit the catch pin on the extraction keys into the holes on both sides
of the trim plate, then pull it out. 3 Insert the extraction keys deeply into the slots on each side, then
follow the arrows as shown on the illustration.

Bend the appropriate tabs to hold the sleeve firmly in place.

Search

ENGLISH 37

Installation/Connection
Wiring connection

Fuse (10 A)

IMPORTANT We recommend installing the unit with a commercially available custom wiring harness specific for your car and leave this job to professionals for your safety. Consult your car audio dealer.
Antenna terminal

To front speaker (left) To front speaker (right)
To rear speaker (left) To rear speaker (right)

White White/Black Gray Gray/Black Green Green/Black Purple Purple/Black

Ignition switch
Car fuse box
Battery 38 ENGLISH

Car fuse box

Red (Ignition wire)

Yellow (Battery wire)
Black (Ground wire) To the metallic body or chassis of the car

If no connections are made, do not let the wire come out from the tab.

Brown (Mute control wire)

To connect the KENWOOD navigation system, refer your navigation manual

Blue/White (Power control wire/ Antenna control wire) (12 V 350 mA)
Light blue/yellow (Steering remote control wire)

To the power control terminal when using the optional power amplifier or to the antenna control terminal in the vehicle

(For

/

/

/

/

/

/

/

)

To the steering wheel remote control adapter

(For

)

To KENWOOD Marine Remote Control unit (optional

accessory)

For the latest information on marine accessories, visit

http://www.kenwood.com/usa/car/marine/

Search

Installation/Connection
Connect external components

Connect external amplifiers via output terminals
When connecting to an external amplifier to the output terminals of this unit, firmly connect the ground wire of the amplifier to the car’s chassis to avoid damaging the unit.

No Part 1 For

: Learning steering remote control (Page 35)

2 For

: To KENWOOD Marine Remote Control unit, KCA-RC55MR

(optional accessory) (Page 7)

3 Output terminals (See the following “Connect external amplifiers via output terminals”.)

4 For

/

/

/

/

/

: Expansion port (12 V 500 mA):

To the optional SiriusXM Vehicle Tuner (commercially available) (Page 17)

5 Microphone input jack (Page 22)

Model

/ /
/ / /

/

Output terminals REAR: FRONT: SW: REAR/SW: FRONT: REAR/SW:

Rear output Front output Subwoofer output Rear/subwoofer output Front output Rear/subwoofer output

Search

ENGLISH 39

References
Maintenance
Cleaning the unit Wipe off dirt on the faceplate with a dry silicone or soft cloth.
Cleaning the connector Detach the faceplate and clean the connector gently with a cotton swab. Be careful not to damage the connector.
Connector (on the reverse side of the faceplate) Handling discs · Do not touch the recording surface of the disc. · Do not stick tape etc. on the disc, or use a disc with tape stuck on it. · Do not use any accessories for the disc. · Clean from the center of the disc and move outward. · Clean the disc with a dry silicone or soft cloth. Do not use any solvents. · When removing a disc from this unit, pull it out horizontally. · Remove burrs from the center hole and disc edge before inserting a disc.
More information For: ­ Latest firmware updates and latest compatible item list
­ KENWOOD original application ­ Any other latest information Visit <www.kenwood.com/cs/ce/>.
General · This unit can only play the following CDs:
· For detailed information and notes about the playable audio files, visit <www.kenwood.com/cs/ce/audiofile/>.
40 ENGLISH

Playable files · Playable audio file:
For disc: MP3 (.mp3), WMA (.wma), AAC (.aac) For USB mass storage class device:
MP3 (.mp3), WMA (.wma), AAC (.aac), AAC (.m4a), WAV (.wav), FLAC (.flac) · Playable disc media: CD-R/CD-RW/CD-ROM · Playable disc file format: ISO 9660 Level 1/2, Joliet, Long file name · Playable USB device file system: FAT12, FAT16, FAT32
Even when audio files comply with the standards listed above, playback may be impossible depending on the types or conditions of media or devices. The AAC (.m4a) file in a CD encoded by iTunes cannot be played on this unit.
Unplayable discs · Discs that are not round. · Discs with coloring on the recording surface or discs that are dirty. · Recordable/ReWritable discs that have not been finalized. · 8 cm CD. Attempting to insert using an adapter may cause malfunction.
About USB devices · You cannot connect a USB device via a USB hub. · Connecting a cable whose total length is longer than 5 m may result in abnormal playback. · This unit cannot recognize a USB device whose rating is other than 5 V and exceeds 1.5 A.
About iPod/iPhone · Made for
­ iPod touch (6th generation) ­ iPhone 5S, 6, 6 Plus, 6S, 6S Plus, SE, 7, 7 Plus, 8, 8 Plus, X, XS, XS MAX, XR (iOS 12.1 or later) · It is not possible to browse video files on the “Videos” menu in [MODE OFF]. · The song order displayed on the selection menu of this unit may differ from that of the iPod/ iPhone. · You cannot operate iPod if “KENWOOD” or ” ” is displayed on iPod. · Depending on the version of the operating system of the iPod/iPhone, some functions may not operate on this unit.

Search

References
About Pandora · Pandora is only available in certain countries.
For more information, visit <www.pandora.com/legal>. · Because Pandora is a third-party service, the specifications are subject to change without prior
notice. Accordingly, compatibility may be impaired, or some or all of the services may become unavailable. · Some functions of Pandora cannot be operated from this unit. · For issues using the application, please contact Pandora at pandora-support@pandora.com.
About Spotify · Spotify application supports:
­ iPhone 5S, 6, 6 Plus, 6S, 6S Plus, SE, 7, 7 Plus, 8, 8 Plus, X, XS, XS MAX, XR (iOS 12.1 or later) ­ iPod touch (6th generation) ­ Android OS 4.0.3 or above · Spotify is a third party service, therefore the specifications are subject to change without prior notice. Accordingly, compatibility may be impaired or some or all of the services may become unavailable. · Some functions of Spotify cannot be operated from this unit. · For issues using the application, please contact Spotify at <www.spotify.com>.
About AMAZON ALEXA · Alexa is a third party service, therefore the specifications are subject to change without prior
notice. Accordingly, compatibility may be impaired or some or all of the services may become unavailable.

For Radio Data System: [SPEECH]:
[NEWS], [AFFAIRS], [INFO] (information), [SPORT], [EDUCATE], [DRAMA], [CULTURE], [SCIENCE], [VARIED], [WEATHER], [FINANCE], [CHILDREN], [SOCIAL], [RELIGION], [PHONE IN], [TRAVEL], [LEISURE], [DOCUMENT] [MUSIC]: [POP M] (music), [ROCK M] (music), [EASY M] (music), [LIGHT M] (music), [CLASSICS], [OTHER M] (music), [JAZZ], [COUNTRY], [NATION M] (music), [OLDIES], [FOLK M] (music)
The unit will search for the Program Type categorized under [SPEECH] or [MUSIC] if selected.
About HD RadioTM Technology
· Adjacent to traditional main stations are extra local FM channels. These HD2/HD3 Channels provide new, original music as well as deep cuts into traditional genre.
· Digital, CD-quality sound. HD Radio Technology enables local radio stations to broadcast a clean digital signal. AM sounds like today’s FM and FM sounds like a CD.
· Program Info provides song name, artist, station ID, and other relevant data to enrich the listening experience.
· Emergency Alert delivers critical and life-saving messages to the public during emergency situations.

About Program Type
For Radio Broadcast Data System: [SPEECH]:
[NEWS], [INFORM] (information), [SPORTS], [TALK], [LANGUAGE], [REL TALK] (religious talk), [PERSNLTY] (personality), [PUBLIC], [COLLEGE], [HABL ESP] (spanish talk), [WEATHER] [MUSIC]: [ROCK], [CLS ROCK] (classic rock), [ADLT HIT] (adult hits), [SOFT RCK] (softrock), [TOP 40], [COUNTRY], [OLDIES], [SOFT], [NOSTALGA] (nostalgia), [JAZZ], [CLASSICL] (classical), [R & B] (rhythm and blues), [SOFT R&B] (soft rhythm and blues), [REL MUSC] (religious music), [MUSC ESP] (spanish music), [HIP HOP]

Search

ENGLISH 41

References

Change the display information

(For

/

/

/

/

/

)

Each time you press DISP, the display information changes.

· If the information is unavailable or not recorded, “NO TEXT”, “NO INFO”, or other information

(eg. station name) appears or display will be blank.

Main display

Clock time

Level meter (Page 34)

Source name STANDBY HD RADIO
RADIO

Display information: Main display

Source name Date back to the beginning

(For

/

)

For digital stations only: Station name Title/Artist Album/Artist Frequency Date back to the beginning

For FM Radio Broadcast Data System stations only: Radio text+ station name Radio text+ title/Radio text+ artist Radio text+ album/Radio text+ artist Frequency Date back to the beginning

(For

/

/

/

)

Frequency Date back to the beginning

For FM Radio Broadcast Data System stations only: Station name/Program type Radio text Radio text+ Radio text+ song title/Radio text+ artist Frequency Date back to the beginning

Source name Display information: Main display

CD or USB

For CD-DA: Disc title/Artist Track title/Artist Playing time Date back to the beginning

For MP3/WMA/AAC/WAV/FLAC files: Song title/Artist Album title/Artist Folder name File name Playing time Date back to the beginning

iPod USB/iPod BT When [MODE OFF] is selected (page 12): Song title/Artist Album title/Artist Playing time Date back to the beginning

PANDORA/ PANDORA BT

Station name Shared/Radio Title Artist Album title Playing time Date back to the beginning

SPOTIFY/ SPOTIFY BT

Context title Song title Artist Album title Playing time Date back to the beginning

SIRIUS XM

Channel number Channel name Artist Song title Content information Category name Date back to the beginning

BT AUDIO/ ALEXA

Song title/Artist Album title/Artist Playing time Date back to the beginning

AUX

Source name Date back to the beginning

42 ENGLISH

Search

References

(For

/

/

)

Each time you press DISP, the display information changes.

· If the information is unavailable or not recorded, “NO TEXT”, “NO INFO”, or other information

(eg. station name) appears or display will be blank.

Main display

Source name Display information: Main display

STANDBY

Source name/Clock Clock Turns off the display* back to the beginning

RADIO

Source name/Clock Frequency Clock Turns off the display* back

to the beginning

For FM Radio Broadcast Data System/FM Radio Data System stations only: Source name/Clock Station name/Program type Radio text Radio text+ Radio text+ song title/Radio text+ artist Frequency Clock Turns off the display* back to the beginning

CD or USB

For CD-DA: Source name/Clock Disc title/Artist Track title/Artist Playing time Clock Turns off the display* back to the beginning

For MP3/WMA/AAC/WAV/FLAC files: Source name/Clock Song title/Artist Album title/Artist Folder name
File name Playing time Clock Turns off the display* back to the beginning

iPod USB/iPod BT When [MODE OFF] is selected (page 12): Source name/Clock Song title/Artist Album title/Artist Playing time Clock Turns off the display* back to the beginning

Source name PANDORA/ PANDORA BT SPOTIFY/ SPOTIFY BT BT AUDIO/ ALEXA AUX

• Only for

Display information: Main display
Source name/Clock Station name Shared/Radio Title Artist Album title Playing time Clock back to the beginning
Source name/Clock Context title Song title Artist Album title Playing time Clock Turns off the display back to the beginning
Source name/Clock Song title/Artist Album title/Artist Playing time Clock Turns off the display back to the beginning
Source name/Clock Clock Turns off the display* back to the beginning
.

Search

ENGLISH 43

Troubleshooting

Symptom

Remedy

Sound cannot be heard.

· Adjust the volume to the optimum level. · Check the cords and connections.

“MISWIRING CHECK WIRING THEN PWR ON” appears.

Turn the power off, then check to be sure the terminals of the speaker wires are insulated properly. Turn the power on again.

“PROTECTING SEND SERVICE” Send the unit to the nearest service center. appears.

Source cannot be selected. Check the [SOURCE SELECT] setting. (Page 6)

· Sound cannot be heard. · The unit does not turn on. · Information shown on the
display is incorrect.

Clean the connectors. (Page 40)

General

The unit does not work at all. Reset the unit. (Page 4)

Correct characters are not displayed.

· This unit can only display uppercase letters, numbers, and a limited number of symbols.
· Depending on the display language you have selected (page 7), some characters may not be displayed correctly.

(For

)

“SET ERROR”/”DEL ERROR”

Setting/deleting the remote control ID is unsuccessful. Turn the power off, then turn on the power and perform the operation again. (Page 7)

(For

)

“ERROR”/”FAILED”

Your steering remote controller is not compatible, learning may not be completed. Consult your car audio dealer for details.

· Radio reception is poor. · Static noise while listening
to the radio.

Connect the antenna firmly.

CD/USB/iPod

Symptom Disc cannot be ejected.
Noise is generated. “PLEASE EJECT” appears.
Playback order is not as intended. Elapsed playing time is not correct. “READING” keeps flashing.
“UNSUPPORTED DEVICE” appears.
“UNRESPONSIVE DEVICE” appears. “USB HUB IS NOT SUPPORTED” appears. · The source does not
change to “USB” when you connect a USB device while listening to another source. · “USB ERROR” appears.

Remedy
Press and hold to forcibly eject the disc. Be careful not to drop the disc when it is ejected. If this does not solve the problem, reset the unit (page 4).
Skip to another track or change the disc.
Reset the unit (page 4). If this does not solve the problem, consult your nearest service center.
The playback order is determined by the order in which files were recorded (disc) or the file name (USB).
This depends on the recording process earlier (disc/USB).
· Do not use too many hierarchical levels and folders. · Reload the disc or reattach the device (USB/iPod/
iPhone).
· Check whether the connected USB device is compatible with this unit and ensure the file systems are in supported formats. (Page 40)
· Reattach the USB device.
Make sure the USB device is not malfunction and reattach the USB device.
This unit cannot support a USB device connected via a USB hub.
The USB port is drawing more power than the design limit. Turn the power off and unplug the USB device. Then, turn on the power and reattach the USB device. If this does not solve the problem, turn the power off and on (or reset the unit) before replacing with another USB device.

HD Radio Tuner/Radio

44 ENGLISH

Search

Troubleshooting

Symptom

The iPod/iPhone does not turn on or does not work.

“LOADING” appears when

you enter search mode by

pressing

.

“NO DISC”

“TOC ERROR”

“NA FILE”

CD/USB/iPod

“COPY PRO” “NO DEVICE”

“NO MUSIC”

“iPod ERROR”

“MEMORY FULL”

“ADD ERROR” “CHECK DEVICE” “NO SKIPS” “NO STATIONS” “STATION LIMIT”

Pandora

“UPGRADE APP”

Remedy
· Check the connection between this unit and iPod/iPhone. · Disconnect and reset the iPod/iPhone using hard reset.
This unit is still preparing the iPod/iPhone music list. It may take some time to load, try again later.
Insert a playable disc into the loading slot.
Make sure the disc is clean and inserted properly.
Make sure the media (disc/USB) contain supported audio files. (Page 40)
A copy-protected file is played (disc/USB).
Connect a device (USB/iPod/iPhone), and change the source to USB/iPod USB again.
Connect a device (USB/iPod/iPhone) that contains playable audio files.
· Reconnect the iPod. · Reset the iPod.
You have reached the maximum storage limit of your iPod/iPhone.
New station creation is unsuccessful.
Check the Pandora application on your device.
The skip limit has been reached.
No stations are found.
The number of registered stations has reached its limit. Retry after deleting unnecessary stations from your device.
Make sure you have installed the latest version of the Pandora application on your device.

SiriusXM® Radio

Spotify

Pandora

Symptom “CONNECT ERROR” “RATING ERROR” “THUMBS N/A” “LICENSE ERROR” “DISCONNECTED” “CONNECTING”
“CHECK APP”
“CH LOCKED LOCK CODE?” “CHAN UNSUB”
“CH UNAVAIL”
“CHECK ANTENNA” “CHECK TUNER”

Remedy
Communication is unstable.
Registration of thumbs up/thumbs down has failed due to insufficient network connectivity.
Registration of thumbs up/thumbs down is not allowed.
You try to access from a country which Pandora is not deliverable.
USB is disconnected from the head unit. Please make sure the device is connected properly through USB.
· Connected via USB input terminal: The device is connecting to the head unit. Please wait.
· Connected via Bluetooth: The Bluetooth is disconnected. Please check Bluetooth connection and make sure both the device and unit are paired and connected.
The Spotify application is not connected properly or user is not login. End the Spotify application and restart. Then, log in to your Spotify account.
The selected channel is locked. Enter the correct pass code to unlock. (Page 19)
The selected channel is unsubscribed. Call 1-866-635-2349 in the U.S.A. or 1-877-438-9677 in Canada to subscribe. (Page 17)
The selected channel is unavailable. For more information about the SiriusXM channel lineup, visit <www.siriusxm.com>.
Check that the antenna and its connection are in good condition.
Make sure the SiriusXM Vehicle Tuner is connected to the unit.

Search

ENGLISH 45

Troubleshooting

Bluetooth®

SiriusXM® Radio

Symptom “NO SIGNAL” “SUBSCRIPTION UPDATED ­ PRESS ENTER TO CONTINUE.” “CODE ERROR”
“NO CONTENT” “SCAN CANCEL” No Bluetooth device is detected. Bluetooth pairing cannot be made.
Echo or noise is heard during a phone conversation. Phone sound quality is poor.
Voice calling method is not successful.

Remedy
Make sure the antenna is mounted outside the vehicle.
Your subscription is updated. Press the volume knob to continue.
Make sure you have entered the correct pass code. (Page 19)
There is insufficient content to start TuneScan.
TuneScan has been aborted.
· Search from the Bluetooth device again. · Reset the unit. (Page 4)
· Make sure you have entered the same PIN code to both the unit and Bluetooth device.
· Delete pairing information from both the unit and the Bluetooth device, then perform pairing again. (Page 22)
· Adjust the microphone unit’s position. (Page 22) · Check the [ECHO CANCEL] setting. (Page 24)
· Reduce the distance between the unit and the Bluetooth device.
· Move the car to a place where you can get a better signal reception.
· Use voice calling method in a more quiet environment. · Reduce the distance from the microphone when you speak
the name. · Make sure the same voice as the registered voice tag is
used.

Symptom

Remedy

Sound is being interrupted or skipped during playback of a Bluetooth audio player.

· Reduce the distance between the unit and the Bluetooth audio player.
· Turn off, then turn on the unit and try to connect again. · Other Bluetooth devices might be trying to connect to the
unit.

The connected Bluetooth audio player cannot be controlled.

· Check whether the connected Bluetooth audio player supports Audio/Video Remote Control Profile (AVRCP). (Refer to the instructions of your audio player.)
· Disconnect and connect the Bluetooth player again.

“NOT SUPPORT”

The connected phone does not support Voice Recognition feature or phonebook transfer.

Bluetooth®

“NO ENTRY”/”NO PAIR”

There is no registered device connected/found via Bluetooth.

“ERROR”

Try the operation again. If “ERROR” appears again, check if the device supports the function you have tried.

“NO INFO”/”NO DATA”

Bluetooth device cannot get the contact information.

“HF ERROR XX”/ “BT ERROR”

Reset the unit and try the operation again. If this does not solve the problem, consult your nearest service center.

“SWITCHING NG”

The connected phones might not support phone switching feature.

The Bluetooth connection between the Bluetooth device and the unit is unstable.

Delete the unused registered Bluetooth device from the unit. (Page 26)

46 ENGLISH

Search

Troubleshooting

Specifications

AMAZON ALEXA Tuner

Symptom No response from Alexa after the voice input. Wrong response from Alexa.
“DISCONNECTED”
Not able to connect or reconnect to Alexa mobile application.

Remedy
Amazon cloud was unable to analyze the voice input.
Alexa misunderstood what was said or did not catch the entire request or sentence spoken. Please try again. (Page 28)
Be sure to connect your smartphone to the unit via Bluetooth. (Page 22)
· Be sure the audio device is connected via Bluetooth. Select the audio device from [AUDIO SELECT] in [BT MODE]. (Page 26)
· Perform the one-time setup process again. See “Setup for the first time” on page 28.
· Turn off, then turn on the unit and try to connect again. · For iOS device, make sure Alexa source or iPod BT source is
selected.

FM
Digital FM AM Digital AM

/

:

Frequency Range

Usable Sensitivity (S/N = 30 dB)

Quieting Sensitivity (DIN S/N = 46 dB)

Frequency Response (±3 dB)

Signal-to-Noise Ratio (MONO)

Stereo Separation (1 kHz)

Frequency Range

Frequency Response (±3 dB)

Signal-to-Noise Ratio (STEREO)

Frequency Range

Usable Sensitivity (S/N = 20 dB)

Frequency Range

Frequency Response (±3 dB)

Signal-to-Noise Ratio (STEREO)

87.9 MHz — 107.9 MHz (200 kHz step) 7.2 dBf (0.63 V/75 )
15.2 dBf (1.58 V/75 )
30 Hz — 15 kHz 68 dB 40 dB 87.9 MHz — 107.9 MHz (200 kHz step) 20 Hz — 20 kHz 75 dB 530 kHz — 1 700 kHz (10 kHz step) 29 dB (28.2 V) 530 kHz — 1 700 kHz (10 kHz step) 40 Hz — 15 kHz 70 dB

Search

ENGLISH 47

Tuner CD player

Specifications

/

/

/

/

/

/

:

FM Frequency Range

/

/

/

/

/

:

87.9 MHz — 107.9 MHz (200 kHz step)

: 87.5 MHz — 108.0 MHz (50 kHz step)

Usable Sensitivity (S/N = 30 dB)

8.2 dBf (0.71 V/75 )

Quieting Sensitivity (DIN S/N = 46 dB)

17.2 dBf (2.0 V/75 )

Frequency Response (±3 dB) 30 Hz — 15 kHz

Signal-to-Noise Ratio (MONO) 64 dB

Stereo Separation (1 kHz)

40 dB

AM Frequency Range

530 kHz — 1 700 kHz (10 kHz step)

Usable Sensitivity (S/N = 20 dB) 29 dB (28.2 V)

Laser Diode Digital Filter (D/A) Spindle Speed Wow & Flutter Frequency Response (±1 dB) Total Harmonic Distortion (1 kHz)
Signal-to-Noise Ratio (1 kHz)
Dynamic Range

GaAIAs
8 times over sampling
500 rpm — 200 rpm (CLV)
Below measurable limit
20 Hz — 20 kHz
/ 0.01 %
/ / / :
0.02 %
/ 97 dB
/ / / :
99 dB
/ 89 dB
/ / / :
92 dB

:
/ /
/
:
/ /
/
:
/ /
/

48 ENGLISH

Search

USB

CD player

Specifications
Channel Separation
MP3 Decode WMA Decode AAC Decode
USB Standard File System Maximum Supply Current MP3 Decode WMA Decode AAC Decode WAV Decode FLAC Decode

/

:

89 dB

/ / / :
90 dB

/ /
/

Compliant with MPEG-1/2 Audio Layer-3

Compliant with Windows Media Audio

AAC-LC “.aac” files

USB 1.1, USB 2.0 (High speed) FAT12/16/32 DC 5 V 1.5 A Compliant with MPEG-1/2 Audio Layer-3 Compliant with Windows Media Audio AAC-LC “.aac”, “.m4a” files Linear-PCM FLAC file (Up to 96 kHz/24 bit)

Audio

Bluetooth

Auxiliary

Frequency Response (±3 dB) Input Maximum Voltage Input Impedance

20 Hz — 20 kHz 1 000 mV 30 k

Version Frequency Range RF Output Power (E.I.R.P.) Maximum Communication Range Profile

Bluetooth 4.2
2.402 GHz — 2.480 GHz
+4 dBm (MAX), Power Class 2
Line of sight approx. 10 m (32.8 ft)
HFP 1.7.1 (Hands-Free Profile) A2DP (Advanced Audio Distribution Profile) AVRCP 1.6.1 (Audio/Video Remote Control Profile) PBAP (Phonebook Access Profile) SPP (Serial Port Profile)

Maximum Output Power
Full Bandwidth Power (at less than 1 % THD)
Speaker Impedance

50 W × 4 22 W × 4
4 — 8

Search

ENGLISH 49

Audio

Specifications
Tone Action
Preout Level/Load Preout Impedance

Band 1: 62.5 Hz ±9 dB Band 2: 100 Hz ±9 dB Band 3: 160 Hz ±9 dB Band 4: 250 Hz ±9 dB Band 5: 400 Hz ±9 dB Band 6: 630 Hz ±9 dB Band 7: 1 kHz ±9 dB Band 8: 1.6 kHz ±9 dB Band 9: 2.5 kHz ±9 dB Band 10: 4 kHz ±9 dB Band 11: 6.3 kHz ±9 dB Band 12: 10 kHz ±9 dB Band 13: 16 kHz ±9 dB
/ 5 000 mV/10 k
/ 4 000 mV/10 k
/ /
: 2 500 mV/10 k
600

General

Operating Voltage Installation Size (W × H × D)
Net Weight (includes Trimplate, Mounting Sleeve) Subject to change without notice.

12 V DC car battery
182 mm × 53 mm × 155.5 mm (7-3/16″ × 2-1/16″ × 6-1/8″)
1.2 kg (2.7 lbs)

50 ENGLISH

Search

libFLAC Copyright (C) 2000-2009 Josh Coalson Copyright (C) 2011-2013 Xiph.Org Foundation
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: – Redistributions of source code must retain the above copyright notice, this list of conditions and the
following disclaimer. – Redistributions in binary form must reproduce the above copyright notice, this list of conditions and
the following disclaimer in the documentation and/or other materials provided with the distribution. – Neither the name of the Xiph.org Foundation nor the names of its contributors may be used to
endorse or promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

· Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
· HD Radio Technology manufactured under license from iBiquity Digital Corporation. U.S. and Foreign Patents. For patents see http://dts.com/patents. HD RadioTM and the HD, HD Radio, and “ARC” logos are registered trademarks or trademarks of iBiquity Digital Corporation in the United States and/or other countries.
· Use of the Made for Apple badge means that an accessory has been designed to connect specifically to the Apple product(s) identified in the badge and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with an Apple product may affect wireless performance.
· Apple, iPhone, iPod, iPod touch, iTunes, and Lightning are trademarks of Apple Inc., registered in the U.S. and other countries.
· Android is a trademark of Google LLC. · ©2019 Pandora Media, LLC. All rights reserved. PANDORA, the PANDORA logo, and the Pandora trade
dress are trademarks or registered trademarks of Pandora Media, LLC. Used with permission. · SPOTIFY and the Spotify logo are among the registered trademarks of Spotify AB. · Sirius, XM and all related marks and logos are trademarks of Sirius XM Radio Inc. All rights reserved. · The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and
any use of such marks by JVC KENWOOD Corporation is under license. Other trademarks and trade names are those of their respective owners. · Amazon, Alexa and all related logos are trademarks of Amazon.com, Inc. or its affiliates.

Search

ENGLISH FRANÇAIS ESPAÑOL

KDC-BT278U
CD-RECEIVER
Quick Start Guide
AUTORADIO CD
Guide de démarrage rapide
RECEPTOR CD
Guía de inicio rápido

For detailed operations and information, refer to the INSTRUCTION MANUAL on the following website: Pour les opérations et les informations détaillées, reportez-vous au MODE D’EMPLOI sur le site web suivant: Para obtener más información y detalles sobre las operaciones, consulte el MANUAL DE INSTRUCCIONES en el siguiente sitio web:

For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or service on the product. Model KDC-BT278U Serial number
US Residents Only
Register Online Register your Kenwood product at http://www.kenwood.com/usa/
© 2019 JVCKENWOOD Corporation

Search

<www.kenwood.com/cs/ce/>
B5K-0722-00 [KN]

CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. In compliance with Federal Regulations, following are reproductions of labels on, or inside the product relating to laser product safety.
JVCKENWOOD Corporation 2967-3, ISHIKAWA-MACHI, HACHIOJI-SHI, TOKYO, JAPAN
THIS PRODUCT COMPLIES WITH DHHS RULES 21CFR SUBCHAPTER J IN EFFECT AT DATE OF MANUFACTURE.
Location : Top Plate
Información acerca de la eliminación de equipos eléctricos y electrónicos al final de la vida útil (aplicable a los países que hayan adoptado sistemas independientes de recogida de residuos)
Los productos con el símbolo de un contenedor con ruedas tachado no podrán ser desechados como residuos domésticos. Los equipos eléctricos y electrónicos al final de la vida útil, deberán ser reciclados en instalaciones que puedan dar el tratamiento adecuado a estos productos y a sus subproductos residuales correspondientes. Póngase en contacto con su administración local para obtener información sobre el punto de recogida más cercano. Un tratamiento correcto del reciclaje y la eliminación de residuos ayuda a conservar los recursos y evita al mismo tiempo efectos perjudiciales en la salud y el medio ambiente.
Informação sobre a eliminação de pilhas Este produto não deve ser eliminado como lixo doméstico geral. Devolva a pilha usada ao revendedor ou entidade autorizada para que a mesma seja devolvida ao fabricante ou importador. A reciclagem e a eliminação de lixo de maneira apropriada ajudarão a conservar os recursos naturais ao mesmo tempo que prevenirão os efeitos prejudicais à nossa saúde e ao meio ambiente.

FCC CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ­ Reorient or relocate the receiving antenna. ­ Increase the separation between the equipment and receiver. ­ Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected. ­ Consult the dealer or an experienced radio/TV technician for help.
Supplier’s Declaration of Conformity Trade Name: KENWOOD Products: CD-RECEIVER Model Name: KDC-BT278U
Responsible Party: JVCKENWOOD USA CORPORATION 2201 East Dominguez Street, Long Beach, CA 90810, U.S.A. PHONE: 310 639-9000
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY
CAUSE UNDESIRED OPERATION.

i

Search

IC (Industry Canada) Caution This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: 1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired
operation of the device.
Attention de `IC (Industrie Canada) L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : 1. L’appareil ne doit pas produire de brouillage. 2. L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible
d’en compromettre le fonctionnement.
Contains Bluetooth Module: FCC ID: ZWY88112 IC ID: 12033A-88112
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
CAUTION This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment should be installed and operated keeping the radiator at least 20 cm or more away from person’s body.
ATTENTION Cet équipement est conforme aux limites d’exposition aux rayonnements énoncées pour un environnement non contrôlé et respecte les règles les radioélectriques (RF) de la FCC lignes directrices d’exposition et d’exposition aux fréquences radioélectriques (RF) CNR-102 de l’IC. Cet équipement doit être installé et utilisé en gardant une distance de 20 cm ou plus entre le radiateur et le corps humain.
Para cumplimiento de la IFT: “La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su
operación no deseada”

SOFTWARE LICENSE AGREEMENT
The software embedded in the Product (hereinafter the “Licensed Software”) provided by Licensor is copyrighted to or sublicensable by the Licensor, and this Agreement provides for the terms and conditions which Users shall follow in order to use the Licensed Software.
The User shall use the Licensed Software by agreeing with the terms of this Software License Agreement. This Agreement shall be deemed completed at the time the User (hereinafter the “User”) initially used the Product in which the “Licensed Software” is embedded.
The Licensed Software may include the software which has been licensed to the Licensor directly or indirectly from any third party. In such case, some third parties require the Users to follow their conditions for use separately from this Software License Agreement. Such software shall not be subject to this Agreement, and the Users are urged to read the “Important Notice concerning the Software” to be provided separately below.
Article 1 General Provision
The Licensor shall grant to the User a non-exclusive and non-transferable (other than the exceptional case referred to in Article 3, Paragraph 1) licensed to use the Licensed Software within the country of the User. (the country where the User bought the Product (hereinafter the “Country”)
Article 2 License
1. The

References

• . Spend less. Smile more.
• Patents - DTS
• Roundcube Webmail :: Welcome to Roundcube Webmail
• amazon.com
• dtsc.ca.gov/hazardouswaste/perchlorate
• Homepage - HD Radio - HD Radio
• kenwood.com.br
• Car Electronics Support Information | Kenwood
• Audio File | Kenwood
• KENWOOD USA
• Marine | Car Entertainment | KENWOOD USA
• Pandora Services Terms of Use
• Subscribe or Try SiriusXM | SiriusXM Canada
• SiriusXM: Music, Sports, Talk & Podcasts, Live & On Demand
• Spotify - Web Player: Music for everyone
• JVCKENWOOD USA Corporation
• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>