hansgrohe Tecturis S Washbasin Mixers Instruction Manual

hansgrohe Tecturis S Washbasin Mixers

Other Model

• Tecturis S 110 Fine Cool Start
  73320XXX
  73321XXX
  73322XXX

• Tecturis S 110 Fine Cool Start
  73323XXX

• Tecturis S 150 Fine Cool Start
  73340XXX
  73341XXX
  73342XXX

• Tecturis S 210 Fine Cool Start
  73360XXX
  73364XXX

• Tecturis S 240 Fine Cool Start
  73370XXX
  73372XXX
  73373XXX

Safety Notes

Gloves should be worn during installation to prevent crushing and cutting injuries.
The product may only be used for bathing, hygienic and body cleaning purposes.
The hot and cold supplies must be of equal pressures.

Installation Instructions

• Prior to installation, inspect the product for transport damages. After it has been installed, no transport or surface damage will be honored.
• The pipes and the fixture must be installed, flushed and tested as per the applicable standards.
• The plumbing codes applicable in the respective countries must be observed.
• The drain valve must only be used as intended. It is not allowed to attach other objects to the drain valve, for example a semi-pedestal.
• The drain valve may only be installed in basins with an overflow opening.

Technical Data

This mixer series-produced with Eco Smart (flow limiter)

Operating pressure: max. 1 MPa
Recommended operating pressure: 0,1 – 0,5 MPa
Test pressure: 1,6 MPa
(1 MPa = 10 bar = 147 PSI)
Hot water temperature: max. 60°C
Thermal disinfection: 70°C / 4 min
The product is exclusively designed for drinking water!

Symbol description

• **** Do not use silicone containing acetic acid!
• Dimensions
• Flow diagram
• Spare parts
• Special accessories
• special tool #58085000
• Installation putty
• flange Hot water limiter
• Cleaning
• Operation
• Test certificate

• Aerator calcified, dirty

|

• Clean aerator, replace as necessary

Mixer stif|

• Cartridge defective, calcified

|

• Exchange cartridge

Mixer dripping|

• Cartridge defective

|

• Exchange cartridge

Water escaping in area of swivel spout  666|

• O-ring defective

|

• Exchange O-ring

Water escaping at the threaded base|

• connection hoses not completely screwed into basic body

|

• Tighten connection hoses by hand

• O-ring at the connection hose defective.

|

• Exchange O-ring

Hot water temperature too low|

• Hot water limiter incorrectly set

|

• Set hot water limiter

Assembly

Instructions de service

Hansgrohe recommends not to use as drinking water the first half liter of water drawn in the morning or after a prolonged period of non-use.

Flow diagram

Tecturis S 110 Fine Cool Start
73320XXX / 73321XXX
Tecturis S 110 Fine Cool Start
73323XXX
Tecturis S 150 Fine Cool Start
73340XXX / 73341XXX
Tecturis S 210 Fine Cool Start
73360XXX
Tecturis S 240 Fine Cool Start
73370XXX / 73372XXX

Tecturis S 110 Fine Cool Start
73322XXX
Tecturis S 150 Fine Cool Start
73342XXX
Tecturis S 210 Fine Cool Start
73364XXX
Tecturis S 240 Fine Cool Start
73373XXX

Dimensions

Tecturis S 110 Fine Cool Start
73320XXX / 73321XXX / 73322XXX / 73323XXX

Tecturis S 240 Fine Cool Start
73370XXX / 73372XXX / 73373XXX

Tecturis S 150 Fine Cool Start
73340XXX / 73341XXX / 73342XXX

Tecturis S 210 Fine Cool Start
73360XXX / 73364XXX

94139XXX

94139007

50100XXX

Spare parts

XXX = Colors
000 = Chrome Plated
140 = Brushed Bronze
670 = Matt Black
700 = Matt White

Tecturis S 110 Fine Cool Start
73320XXX / 73321XXX / 73322XXX
Tecturis S 110 Fine Cool Start
73323XXX
Tecturis S 150 Fine Cool Start
73340XXX / 73341XXX / 73342XXX
Tecturis S 240 Fine Cool Start
73370XXX / 73372XXX / 73373XXX

Tecturis S 210 Fine Cool Start
73360XXX / 73364XXX

Cleaning

Cleaning recommendation / Warranty / Contact

www.hansgrohe.com/cleaning-recommendation

| | |
---|---|---|---

Test certificate

| P-IX| DVGW| SINTEF| NF| | ETA
---|---|---|---|---|---|---
73320XXX| PA-IX 38577/IO| | | | |
73321XXX| PA-IX 38577/IO| | | | |
73322XXX| PA-IX 38603/IO| | | | |
73323XXX| PA-IX 38577/IO| | | | |
73340XXX| PA-IX 38577/IO| | | | |
73341XXX| PA-IX 38577/IO| | | | |
73342XXX| PA-IX 38603/IO| | | | |
73360XXX| PA-IX 38577/IO| | | | |
73364XXX| PA-IX 38604/IO| | | | |
73370XXX| PA-IX 38577/IO| | | | |
73372XXX| PA-IX 38577/IO| | | | |
73373XXX| PA-IX 38603/IO| | | | |

CUSTOMER SUPPORT

Hansgrohe · Auestraße 5 – 9 · D-77761 SciTech ·
Telefon+49 (0) 78 36/51-1282 ·
Telefax +49 (0) 7836/511440
E-Mail: info@hansgrohe.com
Internet: www.hansgrohe.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>