Honeywell HY-200 Febreze Freshness Cool and Refresh Tower Fans Owner’s Manual

Honeywell HY-200 Febreze Freshness Cool and Refresh Tower Fans

Specifications:

• Product Name: Honeywell with Febreze Freshness Cool &
  Refresh Tower Fans

• Model Numbers: HY-200 & HY-220 Series

• Intended Use: Household use only

• Power Source: Electric

• Plug Type: Polarized plug

• Fan Speed Control: Solid-state speed control device included

• Safety Features: Fused safety plug

Important Safety Instructions:

1. Use this fan only as described in this manual. Other use not recommended as it may cause fire, electric shock, or injury to persons.
2. This product is intended for household use ONLY and not for commercial, industrial, or outdoor use.
3. To protect against electric shock, do not place fan in window, immerse unit, plug or cord in water, or spray with liquids.
4. This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of shock, this plug is intended to fit only one way in a polarized outlet. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. DO NOT attempt to defeat this safety feature.
5. Close supervision is necessary when any appliance is used by or near children.
6. Turn the fan OFF and unplug the fan from the outlet when not in use, when moving the fan from one location to another, and before cleaning.
7. To disconnect the fan, first turn the unit OFF, grip the plug and pull it from the wall outlet. Never pull the plug by the cord.
8. Do not operate the fan in the presence of explosive and/or flammable fumes.
9. Do not place the fan or any parts near an open flame, cooking, or other heating appliance.
10. Do not operate the fan with a damaged cord or plug or if the product malfunctions, is dropped, or damaged in any manner (see warranty).
11. Avoid contact with moving fan parts.
12. The use of attachments not recommended by the manufacturer may be hazardous.
13. Place the fan on a dry level surface.
14. Do not hang or mount fan on a wall or ceiling.
15. Do not operate if the fan housing is damaged.
16. A loose fit between the AC outlet (receptacle) and plug may cause overheating and a distortion of the plug. Contact a qualified electrician to replace loose or worn outlet.
17. Do not operate any fan with a damaged cord or plug. Discard any damaged fan, return the fan to the retailer where the fan was purchased, or request a return authorization to return to Kaz USA, Inc. for examination and/or repair.
18. Do not run fan cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Do not route cord under furniture or appliances. Arrange cord away from traffic areas and where it will not be tripped over.

Product Usage Instructions

1. Placement

Place the Honeywell with Febreze Freshness Cool & Refresh Tower Fan on a dry and level surface. Ensure that there is enough space around the fan for proper airflow.

2. Power Connection

Plug the fan into a polarized outlet. The polarized plug should fit fully into the outlet. If it does not fit, reverse the plug. Do not attempt to modify the plug or defeat the safety feature.

3. Operating the Fan

To turn on the fan, use the solid-state speed control device provided. Do not use any other solid-state speed control devices with this fan. Adjust the speed control to your desired airflow.

4. Fan Maintenance

When not in use, turn off the fan and unplug it from the outlet. Before cleaning, ensure that the fan is completely turned off and unplugged. Use a soft cloth or brush to clean the exterior of the fan. Do not immerse the unit, plug, or cord in water or spray with liquids.

5. Safety Precautions

Always supervise children when the fan is in use. Avoid contact with moving fan parts to prevent injury. Do not operate the fan in the presence of explosive or flammable fumes. Keep the fan away from open flames, cooking appliances, and other heating sources.

FAQ

Q: Can I use this fan outdoors?

A: No, this fan is intended for household use only and should not be used outdoors.

Q: Can I mount this fan on a wall or ceiling?

A: No, this fan should not be hung or mounted on a wall or ceiling.

Q: What should I do if the fan cord or plug is damaged?

A: If the cord or plug is damaged, do not operate the fan. Discard any damaged fan, return it to the retailer where it was purchased, or contact Kaz USA, Inc. for examination and/or repair.

IMPORTANT SAFETY INSTRUCTIONS

READ AND SAVE THESE SAFETY INSTRUCTIONS BEFORE USING THIS FAN

When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: FOR US MODELS ONLY – This product em-ploys overload protection (fuse). A blown fuse indicates an overload or short-circuit situation. If the fuse blows, unplug the product from the outlet. Replace the fuse as per the user servicing instructions (follow product marking for proper fuse rating) and check the product. If the replacement fuse blows, a short-circuit may be present and the product should be discarded or returned to an authorized service facility for examination and/or repair.

1. Use this fan only as described in this manual. Other use not recommended as it may cause fire, electric shock or injury to persons.
2. This product is intended for household use ONLY and not for commercial, industrial or outdoor use.
3. To protect against electric shock, do not place fan in window, immerse unit, plug or cord in water or spray with liquids.
4. This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of shock, this plug is intended to fit only one way in a polarized outlet. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. DO NOT attempt to defeat this safety feature.
5. Close supervision is necessary when any appliance is used by or near children.
6. Turn the fan OFF and unplug the fan from the outlet when not in use, when moving the fan from one location to another and before cleaning.
7. To disconnect the fan, first turn the unit OFF, grip the plug and pull it from the wall outlet. Never pull the plug by the cord.
8. Do not operate the fan in the presence of explosive and/or flammable fumes.
9. Do not place the fan or any parts near an open flame, cooking or other heating appliance.
10. Do not operate the fan with a damaged cord or plug or if the product malfunctions, is dropped or is damaged in any manner (see warranty).
11. Avoid contact with moving fan parts.
12. The use of attachments not recommended by the manufacturer may be hazardous.
13. Place the fan on a dry level surface.
14. Do not hang or mount fan on a wall or ceiling.
15. Do not operate if the fan housing is damaged.
16. A loose fit between the AC outlet (receptacle) and plug may cause overheating and a distortion of the plug. Contact a qualified electrician to replace loose or worn outlet.
17. Do not operate any fan with a damaged cord or plug. Discard any damaged fan, return the fan to the retailer where the fan was purchased, or request a return authorization to return to Kaz USA, Inc. for examination and/or repair.
18. Do not run fan cord under the carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Do not route cord under furniture or appliances. Arrange cord away from traffic areas and where it will not be tripped over.

WARNING : To Reduce The Risk of Fire or Electric Shock, Do Not Use This Fan With Any Solid-State Speed Control Device, other than the one supplied.

FUSED SAFETY PLUG – FOR US ONLY

Thank you for your purchase.

This fan features a fused safety plug which is designed to cut off electric current to the fan if an electrical fault occurs. Please see below for more information on how to properly use your fan and replace the safety plug fuse, if needed.

USER SERVICING INSTRUCTIONS

• Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling on cord.
• If your fan loses power and you suspect that the fuse on your fan has blown, you should first remove the spare fuse holder attached to the cord plug (Fig. 1). Remove the spare fuse from the plastic spare fuse holder, and set the spare fuse aside (Fig. 2).
• You can gain access to the blown fuse by sliding open the door found on the side of the plug. Slide the door outward until the blown fuse is fully visible (Fig. 3).
• Carefully remove the blown fuse and snap the replacement fuse into place. Risk of fire. Replace fuse only with 2.5 Amp, 125 volt fuse (provided with product). Fully close the fuse door by sliding back into place. Discard the blown fuse. The plug should now be ready for normal use.
• Risk of fire. Do not replace attached plug. Contains a safety device (fuse) that should not be removed. Discard product if the attached plug is damaged.
• If you need further information on how or when to replace the fuse in the safety plug, please contact Kaz Consumer Relations Department by visiting our website at www.HoneywellFanSavings.com or calling 1- 800-477-0457.

FAN OPERATION – HY-200 Series

1. Remove the fan from the plastic bag and carton.
2. Place the fan on a dry-level surface.
3. Plug the fan into a 120-volt outlet.

On/Off
To turn fan on, turn the fan Speed Control knob located on the bottom of the control panel clockwise.
Speed Control
Turn the fan Speed Control knob clockwise to set the Fan at High or Low
Oscillation
To activate the Oscillation feature, press the Oscillation button once. Press the Oscillation button again to turn the Oscillation feature off.

See the next two pages for instructions on installing the Febreze® Set&Refresh® scent cartridge.

FAN OPERATION – HY-220 Series

1. Remove the fan from the plastic bag and carton.
2. Place the fan on a dry-level surface.
3. Plug the fan into a 120-volt outlet.

On/Off
To turn fan on, press the Power button ( located on the bottom of the control panel.
Speed Control
Press the preferred Speed Control Button to set the Fan to operate at High speed, Medium speed or Low speed.
Oscillation
To activate the Oscillation feature, press the Oscillation button once. Press the Oscillation button again to turn the Oscillation feature off.

See the next two pages for instructions on installing the Febreze® Set&Refresh® scent cartridge.

HOW IT WORKS

Once a Febreze® Set&Refresh® scent cartridge has been inserted, fresh Febreze® scent is released into the Scent Path and travels to the interior region of the fan. At this point, the fresh Febreze® scent combines with the air being drawn into the fan by the fan motor. The fan then pushes a stream of Febreze® scented air out through the front fan grilles to cool and freshen your entire room. The Scent Control Dial allows you to control the level of scent output. To operate the fan without scent, simply remove the Febreze® Set&Refresh® scent cartridge.

FAN OPERINSTALL FEBREZEATION® SET &REFRESH® SCENT CARTRIDGE

If you would like to use the scent distribution feature on your fan, you need to install and activate a Febreze® Set&Refresh® scent cartridge. Your Honeywell with Febreze Freshness™ Cool & Refresh Fan package contains one Febreze® Set&Refresh® scent cartridge at the time of purchase. Fragrance is intended for use with Honeywell fan models HY-200 Series and HY-220 Series .

CONTROLLING THE FEBREZE® SCENT

Once the Febreze® Set&Refresh® scent cartridge is properly installed, use the Febreze® Scent Control Dial located on the top of the Fan control panel (Fig. 4), to control the amount of scent released into the air. Turn the Febreze® Scent Control Dial clockwise to release increasing amounts of Febreze® scent into the air. Keep the Scent Control Dial in the LOW position if you want the minimum amount of Febreze® scent to be released into the air and circulated by your fan.

Turning the Febreze® Scent Control Dial all the way to the
right (MAXIMUM) will release the maximum amount of Febreze® scent into your room.
PLEASE NOTE:
The speed at which you run your Honeywell with Febreze Freshness™ Cool & Refresh Fan does affect the length of time your Set&Refresh® scent cartridge will last.  An installed and activated Set&Refresh® scent cartridge will empty faster if you run your fan at HIGH speed instead of LOW speed. If you regularly run your fan at LOW speed while a Set&Refresh® scent cartridge is installed and activated, the Set&Refresh® scent cartridge will last longer. To operate the fan without any scent, simply remove the scent cartridge from the fan. Febreze® Set&Refresh® scent cartridges are available in a variety of scents wherever Set&Refresh® products are sold. Click on the ‘Buy Now’ link on www.Febreze.com to locate a retailer near you.
CAUTION: EYE IRRITANT. Avoid contact with eyes. Do not put fingers into product vent. Wash hands after handling perfume cartridge.

KEEP OUT OF REACH OF CHILDREN AND PETS. FIRST AID TREATMENT:

Contains fragrance oils. If eye contact occurs, rinse with plenty of water for 20 minutes. If eye irritation persists, consult a physician. IF SWALLOWED; do not induce vomiting, call a physician or poison control center immediately.

FREQUENTLY ASKED QUESTIONS

• Should I remove the foil from the back of the Set &Refresh® scent cartridge?
  • No, do not remove the foil from the cartridge. Simply remove the cartridge from its packaging and place it into the slot in the Scent Cartridge Compartment on the top of the unit. By inserting the cartridge properly in the fan, the scent cartridge foil will automatically be pierced to release the Febreze® scent.
• How do I insert the scent cartridge?
  • Hold the scent cartridge so that the curved side is facing upward. Align the cartridge with the slot inside the Scent Cartridge Compartment on top of the unit. Slide the cartridge into the slot until it feels secure.
• Why isn’t my fan-producing scent anymore?
  • It may be due to an empty Set&Refresh® scent cartridge. Check the cartridge in the unit; if it is empty and no longer releasing any scent, it is time to replace the cartridge.
• Where can I get additional Febreze® Set &Refresh® scent cartridges?
  • You can purchase Febreze® Set&Refresh® scent cartridges wherever Set&Refresh® products are sold. Click on the ‘Buy Now’ link on www.Febreze.com to locate a retailer near you.
• Can I only use the Febreze Set &Refresh® scent cartridge that came with my Honeywell with Febreze Freshness™ Cool & Refresh Fan?
  • No – you can use any of the variety of scents available in the Febreze® Set&Refresh® scent cartridge assortment. See www.Febreze.com for more information on which scents are available.
• How long will a Set &Refresh® scent cartridge last in my fan?
  • A single Set&Refresh® scent cartridge may last between 2-4 weeks depending on a variety of factors, including: · Fan speed used while the scent cartridge is inserted
  • Room Size
  • Amount of air flow in the room where the fan is operating
• NOTE: Operating the fan at higher speeds while a Set&Refresh® scent cartridge is installed will cause the scent cartridge to empty faster. Similarly, operating the fan at lower speeds while a Set&Refresh® scent cartridge is inserted will enable the scent cartridge to last for a longer period of time.
• Can my fan be operated without a Set &Refresh® scent cartridge?
  • Yes, your fan is fully operational as a fan only, without the scent cartridge.

USER SERVICING INSTRUCTIONS

CLEANING AND STORAGE

• Ensure the fan is turned off and unplugged.
• Remove the Set&Refresh® scent cartridge and discard.
• Use only a soft cloth to gently wipe the outer surfaces of the fan clean.
• To clean between the grills and fan blade area, we recommend using a pipe cleaner, flexible dust wand, vacuum cleaner or compressed air to gently remove the dust.
• To clean the rear grill use a soft dry cloth.
• DO NOT immerse the fan in water and never allow water to drip into the motor housing.
• DO NOT use gasoline, paint thinner or other chemicals to clean the fan.
• For storage, you may leave the fan assembled and covered to protect it from dust. Store the fan in a cool, dry place.

CONSUMER RELATIONS

Mail questions or comments to: Kaz USA, Inc. Consumer Relations Dept. 250 Turnpike Road Southborough, MA 01772 Please be sure to specify a model number.

• Call us toll-free at: 1-800-477-0457
• E-mail: consumerrelations@kaz.com
• Or visit our website at:
  • www.HoneywellFanSavings.com

NOTE : IF YOU EXPERIENCE A PROBLEM, PLEASE CONTACT CONSUMER RELATIONS FIRST OR SEE YOUR WARRANTY. DO NOT RETURN TO THE ORIGINAL PLACE OF PURCHASE. DO NOT ATTEMPT TO OPEN THE MOTOR HOUSING YOURSELF, DOING SO MAY VOID YOUR WARRANTY AND CAUSE DAMAGE TO THE FAN OR PERSONAL INJURY.

WARRANTY

1 YEAR LIMITED WARRANTY

You should first read all instructions before attempting to use this product.

• A. This 1 year limited warranty applies to
  repair or replacement of product found to be defective in material or workmanship. This warranty does not apply to damage resulting from commercial, abusive, unreasonable use or supplemental damage. Defects that are the result of normal wear and tear will not
  be considered manufacturing defects under this warranty. KAZ IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE. ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY. Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you also may have other rights which vary from jurisdiction to jurisdiction. This warranty applies only to the original purchaser of this product from the original date of purchase.

• B. At its option, Kaz will repair or replace this product if it is found to be defective in material or workmanship. Defective product should be returned to the place of purchase in accordance with store policy. Thereafter, while within the warranty period defective product may be returned to Kaz.

• C. This warranty does not cover damage resulting from any unauthorized attempts to repair or from any use not in accordance with the instruction manual.

• D. Return defective product to Kaz USA, Inc. with a brief description of the problem. Include proof of purchase and a $10 US/$15.50 CAN check or money order for handling, return packing and shipping charges. Please include your name, address and a daytime phone number. You must prepay shipping charges. We suggest having tracking or delivery confirmation. Send to:

  • In U.S.A:

  • Kaz USA, Inc.
    Attn: Returns Department 4755 Southpoint Drive Memphis, TN 38118 USA

  • In Canada:

  • Kaz Canada, Inc.
    Attn: Returns Department 510 Bronte Street South Milton, ON L9T 2X6 Canada

Please go to www.HoneywellFanSavings.com and register your product under the Customer Care Center and receive product information updates and new promotional offers.

References

• Air Fresheners & Odor-Fighting Products | Febreze
• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>