hansgrohe Tecturis E 80 CoolStart Washbasin Mixers Instruction Manual
- June 17, 2024
- hansgrohe
Table of Contents
Tecturis E 80 CoolStart Washbasin Mixers
Instruction Manual
Tecturis E 80 CoolStart Washbasin Mixers
Safety Notes
Gloves should be worn during installation to prevent crushing and cutting
injuries.
The product may only be used for bathing, hygienic and body cleaning purposes.
The hot and cold supplies must be of equal pressures.
Installation Instructions
- Prior to installation, inspect the product for transport damages. After it has been installed, no transport or surface damage will be honoured.
- The pipes and the fixture must be installed, flushed and tested as per the applicable standards.
- The plumbing codes applicable in the respective countries must be observed.
- The drain valve must only be used as intended. It is not allowed to attach other objects to the drain valve, for example a semi-pedestal.
- If the instantaneous water heater causes problems or if you wish to increase the water flow, the EcoSmart (flow limiter) located behind the aerator can be removed.
Technical Data
This mixer series-produced with EcoSmart (flow limiter)
Operating pressure: max. 1 MPa
Recommended operating pressure: 0,1 – 0,5 MPa
Test pressure: 1,6 MPa (1 MPa = 10 bar = 147 PSI)
Hot water temperature:max. 60°C
Thermal disinfection: 70°C / 4 min
The product is exclusively designed for drinking water!
Symbol description
Do not use silicone containing acetic acid!
Adjustment (see page 36)
To adjust the hot water limiter. Using a hot water limiter in combination with
a continuous flow water heater is not recommended.
Dimensions (see page 38)
Flow diagram (see page 39)
Spare parts (see page 40)
XXX = Colors
000 = Chrome Plated
140 = Brushed Bronze
670 = Matt Black
700 = Matt White
Special accessories (order as an extra)
-
special tool #58085000 (see page 34)
-
Installation putty (see page 35)
Cleaning (see page 42)
Operation (see page 37) -
Hansgrohe recommends not to use as drinking water the first half liter of water drawn in the morning or after a prolonged period of non-use.
-
After periods of prolonged non-use, but at least every third day, the fittings must be opened with the handle in hot and cold position to prevent stagnation in the connecting lines. Let the water run until the water temperature is constant.
Test certificate (see page 44)
Assembly
Tecturis E
Tecturis E
CoolStart
Tecturis E 80 CoolStart
73001XXX
Tecturis E 80
73002XXX / 73004XXX
Tecturis E 110
73010XXX / 73011XXX
Tecturis E 110 CoolStart
73012XXX / 73014XXX /
73016XXX / 73018XXX
Tecturis E 80 73004XXX
Tecturis E 110 CoolStart 73016XXX
Tecturis E 110 CoolStart 73018XXX
Tecturis E 73200XXX
Tecturis E 80 73002XXX
Tecturis E 80 CoolStart 73001XXX
Tecturis E 110 73011XXX
Tecturis E 110 CoolStart 73012XXX
Tecturis E 110 73010XXX
Tecturis E 110 CoolStart 73014XXX
Tecturis E 80
CoolStart
73001XXX
Tecturis E 80
CoolStart
73002XXX / 73004XXX
Tecturis E 110
CoolStart
73012XXX / 73016XXX
Tecturis E 110
CoolStart
73014XXX / 73018XXX
http://www.hansgrohe.com/cleaning-
recommendation
Cleaning recommendation / Warranty / Contact
73001XXX PA-IX
38544/IO
73002XXX PA-IX 38544/IO
73004XXX PA-IX 38605/IO
73010XXX
73011XXX PA-IX 38541/IO
73012XXX PA-IX 38542/IO
73014XXX PA-IX 38542/IO
73016XXX PA-IX 38605/IO
73018XXX PA-IX 38605/IO
73200XXX PA-IX 38581/IO
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>