hansgrohe 41745XXX AddStoris Wall Mounting Dispenser Instruction Manual

hansgrohe 41745XXX AddStoris Wall Mounting Dispenser

Product Information

Specifications

• Model: AddStoris
• Handle Model: 41744XXX

Safety Notes

• Gloves should be worn during installation to prevent crushing and cutting injuries.
• Intended use of the handle 41744XXX: The handle is not a medical product, it is not intended for physically impaired persons, but only for general private use.
• Use only the handle 41744XXX for support, the remaining products are not intended to be used as support.

Check the proper attachment and tight seating of the installed products periodically (annually).

• Installation Instructions

  • Do not use silicone-containing acetic acid!
  • Lift off the pump and lid for filling and cleaning.

• Cleaning
  To clean, lift off the pump and lid.

• Operation
  Refer to page 21 of the user manual for detailed instructions on how to operate the product.

• Spare Parts
  Refer to page 28 of the user manual for a list of available spare parts.

• Symbol Description
  The symbol description can be found in the user manual.

• Assembly
  Refer to page 18 of the user manual for detailed assembly instructions.

FAQ

• Q: Can I use silicone-containing acetic acid for installation?
  A: No, it is advised not to use silicone-containing acetic acid.

• Q: How often should I check the attachment and seating of the installed products?
  A: It is recommended to check the attachment and seating of the installed products annually.

• Q: Can I use the handle as a support?
  A: Only the handle model 41744XXX is intended to be used as a support. The remaining products are not suitable for this purpose.

Models

Safety Notes

• Gloves should be worn during installation to prevent crushing and cutting injuries.
• Intended use of the handle 41744XXX: The handle is not a medical product, it is not intended for physically impaired persons, but only for general private use.
• Use only the handle 41744XXX for support, the remaining products are not intended to be used as support.
• Check the proper attachment and tight seating of the installed products periodically (annually).

Installation Instructions

• Before installation, inspect the product for transport damages. After it has been installed, no transport or surface damage will be honoured.
• During installation of the product by qualified trained personnel, make sure that the entire fastening surface is even and smooth (no protruding seams or tile offset), and that the finish of the wall is suitable to apply the product and has no weak points.
• 41773XXX. 41774XXX: The bonding surfaces must be clean, dry, wax and grease-free, able to bear weight and free of release agents. In most cases, it is best to wipe down the surface with a clean dry cloth. Do not use any conventional cleansers containing release agents. If necessary, use an alcohol cleaner or in the case of waxy natural stone, use a wax-removing cleaner. Rub this off with a clean, dry cloth before it evaporates.

Do not use silicone-containing acetic acid!

Assembly

Operation

Lift off the pump and lid for filling and cleaning.

Cleaning recommendation/Warranty/Contact

www.hansgrohe.com/cleaning-recommendation.

Spare parts

Hansgrohe

• Auestraße 5 – 9 · D-77761 Schiltach
• Telefon +49 (0) 78 36/51-1282
• Telefax +49 (0) 7836/511440
• E-Mail: info@hansgrohe.com
• Internet: www.hansgrohe.com.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>