ACEMIRO 20×28 Inch Black Recessed Bathroom Medicine Cabinet with Mirror User Manual

**ACEMIRO 20×28 Inch Black Recessed Bathroom Medicine Cabinet with Mirror User Manual

**

HARDWARE AND TOOLS ( Tools not included)

• Power Drill

• Mallet

• Tape Measure

• Safety Goggles

• Drill Bits

• Pencil’

• Level

HARDWARE LISTS

INSTALLATION

INSTRUCTIONS

Please read carefully and save these instructions.
Don’t discard any of the packaging until you are sure that you have all of the parts and the fitings.

IMPORTANT

1. Unpack cabinet. DO NOT lay cabinet on tiled or concrete surface prior to installation. Cabinet must be on protected surface to prevent chipping of the corners.
2. Care must be taken before drilling pilot holes to avoid any existing wiring or pipe work that may be concealed.

MAINTENANCE

Wipe clean with a soft damp cloth. Apply glass cleaner to cloth and do not apply directly to mirror.
Never use abrasive cleaners as these could damage the finish.

INSTALLATION

Please refer to below surface mount or recess mount method.

SURFACE MOUNT INSTRUCTION

Step 1

Unpack the metal cabinet and prepare tools needed.

Step 2

Draw horizontal line connecting the marked location.
The line should be level.
Adjust to level if necessary.

Step 3

Drill holes,and put in the plastic expansion bolt.

Step 4

Attach the cabinet to the wall with mountin screws from the hardware pack.
THE CABINET CAN BE FLIPPED FOR REVERSE INSTALLATION AND THE DOOR COULD OPEN EITHER LEFT OR RIGHT SIDE.

Step 5

1. Determine the appropriate shelf location;
2. Insert the shelf support into both sides of the cabinet;
3. Attach the shelf onto the shelf support

RECESS MOUNT INSTRUCTIONS

NOTE: Rough opening is not an exact measurement. The extra space allows cabinet to be inserted into the opening. Add shims to level and tighten space if necessary. Additional framing might be required.

Rough Wall Opening

Overall Size: Rough Wall Opening
16 in. (W) x 24 in. (H) x 5 in. (D): 13-7/8 in. (W) x 18 in. (H) x 3-1/2 in.(D)
20 in. (W) x 28 in. (H) x 5 in. (D): 24 in. (W) x 30 in. (H) x 5 in. (D)
17-5/8 in. (W) x 22 in. (H) x 3-1/2 in.(D): 21-7/8 in. (W) x 24 in. (H) x 3-1/2 in.(D)

Step 1

NOTE: Before cutting the rough opening, check for pipes, electrical cables, or heatingducts. If it is required to remove part of stud, make sure that the wall is not a load bearing wall.

Prepare the opening in the wall for the cabinet body.

Make sure that there is support on both sides of the opening to attach the cabinet body, as shown.

NOTE: The cabinet height should be a minimum 2 in. above faucet.

Step 2

Position the cabinet body in the rough wall opening. Make sure that the cabinet body flange covers the wall opening uniformly.

Secure both sides of the cabinet body to the wall supports using mounting screws.

NOTE: The cabinet body must be level for the door to work properly.

THE CABINET CAN BE FLIPPED FOR REVERSE INSTALLATION AND THE DOOR COULD OPEN EITHER LEFT OR RIGHT SIDE.

Step 3

1. Determine the appropriate shelf location;
2. Insert the shelf support into both sides of the cabinet;
3. Attach the shelf onto the shelf support .

• A – Width
• B – Height
• C – Depth

Unit: Inch

Note : All dimensions & specifications are approximate and subject to change without notice

Customer Service:

For any questions or queries regarding our products, please contact our support team：
Email ：acemiro2023@outl

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>