Guye P6 Speaker User Manual

 User Manual

P6 Speaker

In order to better use the product performance, please read the use manual carefully and charge the speaker kits fully before the first use.

Speaker Diagram

1. Long Press: Power on/off
   Short Press: Light Switch

2. Short Press: Play/Pause

3. Long Press: Remove Original Voice
   Short Press: TF card /Bluetooth/AUX Mode Switch

4. Long Press: Prev Song
   Short Press: Vol-

5. Long Press: Next Song
   Short Press: Vol+

6. DC 5V Charging Port

7. AUX

8. TF Card Slot

Speaker Operating Instruction

Mobile Phone Conntecting via Bluetooth

1. Long press the power button for 3 seconds to turn on the speaker, and Bluetooth indicator will keep flashing.
2. Turn on the Bluetooth setting on the phone, choose the Bluetooth named “VS-6633” for paring , You will hear a quick sound after connecting successfully
3. Now, you can play the music from the music player or Karaoke APPs on your phone.

Note: The mic can’t work with 2 bluetooth devices at the time. If you would like to connect a second device via bluetooth, please delete the first one from your mobile phone.

Charging Description

1. When the battery is out of power, the machine will be off automatically.
2. Please use the original charging cable. When charging, the indicator turns red.
3. The charging time is about 4-5 hours. After fully charged, the indicator will be off automatically.
4. The working time is about 4-5 hours under normal operation.

Troubleshooting

the device and the speaker
Speaker doesn’t turn on| Lower power| Charge the speaker
Fail to connect Bluetooth| Has connected other device| Delete it from Bluetooth
Sound distortion| Volume is too high or the power is too low| Turn down the volume of your device or charge the speaker
Not playing music when plugged into a TF card| The format is wrong or loose contact| Change the music format, or unplug and plug into the TF card again
Speaker not charging| Something wrong with the charging cable or loose contact| Unplug the charging cable and plug it into again. Or try a different charging cable

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/ TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Caution
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Specification

Model No: P 6
Mic Connection: Wireless connection
Mic: HiFi Pickup
Speaker: 5W*2
Frequency Response Range: 50Hz- 20KHz
Distortion: <=3%
Maximum Sound Pressure Level: >= 90dB
Bluetooth Transmission Distance: 10M
Mic Connection Distance: 10M
Input Charging Voltage: 5V
Battery Specification :3.7V 3000mAh battery
Working Time: 4-5H
Charging Time: 4-5H
Working Temperature: -10°C~45°C
Warning :

1. If your machine is emitting smoke or experiencing any other abnormal behavior, please contact our customer service for assistance.
2. If the machine has been rained on or exposed to moisture, please place it in a well-ventilated area to dry.
3. Please do not use high temperatures to bake the machine, as this can cause damage or lead to the malfunction of internal components.
4. This product should not be exposed to conditions of excessive heat, such as direct sunlight or fire.
5. Please do not throw away the machine to prevent it from dropping and getting damaged.
6. When using a power adapter for power, the power adapter should meets CCC certification and standard requirements.

Made in China

Documents / Resources

| Guye P6 Speaker [pdf] User Manual
P6 Speaker, P6, Speaker
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>