Infinix Smart 2 Phone Instruction Manual

June 16, 2024
Infinix

Infinix Smart 2 Phone Instruction

Product Information

Specifications:

Know your phone:
The Infinix Smart 2 comes with the following features:

  • Earphone Jack
  • Front Camera
  • Camera
  • Volume Button
  • Power Button
  • USB Jack
  • Front Flash
  • Flash
  • Fingerprint

Getting Started:
To insert the SIM card and memory card:

  1. Switch off the mobile phone and remove the rear cover.
  2. Insert the SIM card in the card slot properly.
  3. Finally, replace the rear cover of the mobile phone.

Charging the Phone:
You can charge your device using a charger or by connecting it to the computer using a USB cable (which comes with the phone).
Note : Only use a compatible charger; immovable inbuilt battery. The phone can be restarted by holding the power button for 10 seconds.

Caution:
Operating Frequency Band (RF):

  • E-GSM900: 880-915MHz (TX), 925-960MHz (RX)
  • DCS1800: 1710-1785 MHz (TX), 1805-1880 MHz (RX)
  • WCDMA BAND I: 1920-1980 MHz (TX), 2110-2170 MHz (RX)
  • WCDMA BAND VIII: 880-915MHz (TX), 925-960MHz (RX)

SAR Certification:
This device meets international guidelines for exposure to radio waves.

Body parts Test value Test distance Limit
Head 0.526W/Kg10g 0mm 2.0 W/Kg10g
Body 0.890W/Kg10g 5mm 2.0 W/Kg10g

Declaration of Conformity:
We, INFINIX MOBILITY LIMITED, declare that the product:

  • Product name: Mobile phone
  • Model No.: X5515
  • Trademark: Infinix

This product conforms with the relevant standards or other standardizing documents in terms of health, safety, and EMC.
DOC information available on the Internet: www.infinixmobility.com

Frequently Asked Questions (FAQ):

  1. Q: How do I insert the SIM card and memory card?
    A: To insert the SIM card and memory card, follow the steps mentioned in the “Getting Started” section of the user manual.

  2. Q: How can I charge the phone?
    A: You can charge the phone using a compatible charger or by connecting it to a computer using a USB cable.

  3. Q: What is the SAR certification?
    A: SAR certification ensures that the device meets international guidelines for exposure to radio waves.

  4. Q: Where can I find more information about the product?
    A: You can find more information about the product on the official website: www.infinixmobility.com

Hereby, INFINIX MOBILITY LIMITED
Declares that this Mobile Phone is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.

Know your phone

  1. Earphone Jack
  2. Front camera
  3. Camera
  4. Volume Button
  5. Power Button
  6. USB Jack
  7. Front Flash
  8. Flash
  9. Fingerprint

Getting started

Insert SIM card & Memory card

  1. Switch off the mobile phone and remove the rear cover.
  2. Insert the SIM card in the card slot properly.
  3. Finally, replace the rear cover of the mobile phone.

Charging the phone

You can charge your device using a charger or by connecting it to the computer using a USB cable (which comes with the phone).
Note : Only use a compatible charger; immovable inbuilt battery.
The phone can be restarted by holding the power button for 10 seconds.

CAUTION

  1. Use carefully with the earphone maybe excessive sound pressure from earphones and headphones can cause hearing loss.

  2. Risk of explosion if the battery is replaced by an incorrect type, dispose of used batteries according to the instructions.

  3. The product shall only be connected to a USB interface of version USB2.0

  4. The adapter shall be installed near the equipment and shall be easily accessible.

  5. EUT Temperature:-10℃~+65℃.

  6. Charging Temperature: 0℃~+55℃

  7. Adapter1: CU-52AX
    Input: AC 100-240V~50/60Hz, 200mA
    Output: DC 5.0V 1.2A
    Adapter2: CU-52YX
    Input: AC 100-240V~50/60Hz, 200mA
    Output: DC 5.0V 1.2A

  8. The device complies with RF specifications when the device is used at 5mm from your body.

  9. To prevent possible hearing damage, do not listen at high volume levels for long periods.

  10. Earphone and USB cables are shielded.

Operating Frequency Band (RF):

  • E-GSM900: 880-915MHz (TX), 925-960MHz (RX);
  • DCS1800: 1710-1785 MHz (TX), 1805-1880 MHz (RX);
  • WCDMA BAND I:1920-1980 MHz (TX), 2110-2170 MHz (RX);
  • WCDMA BAND VIII: 880-915MHz (TX), 925-960MHz (RX);
  • LTE BAND3: 1710-1785MHz (TX), 1805-1880MHz (RX);
  • LTE BAND7: 2500 -2570 MHz(TX), 2620 -2690 MHz(RX);
  • LTE BAND20: 832 -862 MHz(TX), 791- 821 MHz(RX);
  • LTE BAND40: 2300-2400MHz (TX), 2300-2400MHz (RX);
  • Bluetooth: 2400-2483.5MHz (TX/RX) ;
  • Wi-Fi: 2412-2472 MHz (TX/RX);
  • GPS:1.57542GHz
  • FM:87.5 MHz -108 MHz.

Modulation mode:

  • GMSK,8PSK(GSM)
  • BPSK/QPSK/16-QAM (WCDMA)
  • QPSK/16-QAM/64QAM (LTE)
  • GFSK, 1/4π- DQPSK, 8DPSK (BT)
  • GFSK (BLE)
  • OFDM for IEEE 802.11g/n(HT-20) /n(HT-40) (WiFi)
  • IEEE 802.11a/n:OFDM (BPSK / QPSK / 16QAM / 64QAM)
  • BPSK(GPS)

RF Output Power:

  • GSM900:33dBm±2dB
  • GSM1800:30dBm±2dB
  • WCDMA BAND I/VIII:24dBm+1.7dB/-3.7dB
  • LTE BAND3/7/20/40:23dBm+2.7dB /-2.7dB
  • Bluetooth:0-10 dBm
  • WiFi: 14dBm +/-3dB

**Specific Absorption Rate (SAR) Certification

**

THIS DEVICE MEETS INTERNATIONAL GUIDELINES FOR EXPOSURE TO RADIO WAVES

Body parts Test value Test distance Limit
Head 0.425W/Kg10g 0mm 2.0 W/Kg10g
Body 0.448W/Kg10g 5mm 2.0 W/Kg10g

DOC information available on the Internet: www.infinixmobility.com

Declaration of conformity

We: INFINIX MOBILITY LIMITED
(Name of manufacturer)
RMS 05-15, 13A/F SOUTH TOWER WORLD FINANCE CTR HARBOUR CITY 17 CANTON RD TST KLN HONG KONG.
(Address)
declare under our responsibility that the product

  • Product name: Mobile phone
  • Model No.: X5515
  • Trademark: Infinix

(Including product name, model No. descriptions, versions, and supplementary characteristics) to which this declaration refers conforms with the relevant standards or other standardizing documents

  • 3.1a Health: EN 50360:2017
    • EN 50566:2017
    • EN 62479:2010
  • 3.1a Safety:EN60950-1:2006+A11:2009+A1:2010+A12:2011+ A2:2013
  • 3.1b EMC: Draft ETSI EN 301 489-1 V2.2.0 (2017-03)
    • Draft ETSI EN 301 489-17 V3.2.0 (2017-03)
    • Draft ETSI EN 301 489-19 V2.1.0 (2017-03)
    • Draft ETSI EN 301 489-52 V1.1.0 (2016-11) EN 55032:2015
    • EN 55035: 2017
    • EN61000-3-2:2014
    • EN61000-3-3:2013
  • 3.2 Radio: ETSI EN 301 511 V12.5.1 (2017-03)
    • ETSI EN 301 908-1 V11.1.1 (2016-07)
    • ETSI EN 301 908-2 V11.1.1 (2016-07)
    • ETSI EN 301 908-13 V11.1.2 (2017-07)
    • ETSI EN 300 328 V2.1.1 (2016-11)
    • ETSI EN 303 413 V1.1.1 (2017-06)
    • Final Draft ETSI EN 303 345 V1.1.7(2017-03) Software Version:X5515-H398DEG-GO-180323V11 Hardware Version:V1.0
    • Adapter1: CU-52AX
    • Input: AC 100-240V~50/60Hz, 200mA
    • Output: DC 5.0V 1.2A
    • Adapter2: CU-52YX
    • Input: AC 100-240V~50/60Hz, 200mA
    • Output: DC 5.0V 1.2A
    • Li-ion Battery: BL-30VX
    • Voltage: 3.85V
    • Capacity: 3000mAh/3050mAh(min/typ)
    • Limited Charge Voltage: 4.4V
  1. Notified body involved: TÜV Rheinland LGA Products GmbH, 0197.
  2. Performed conformity assessment according to Directive Annex III Module B of the 2014/53/EU Radio Equipment Directive (RED) and issued the EU-type examination certificate.
  3. This declaration of conformity is issued under the sole responsibility of the manufacturer.
  4. The object of the declaration described above conforms with the relevant Union harmonization legislation: Directive 2014/53/EU
    Other Union harmonisation legislation where applicable

Place and date of issue (of this DoC): Shenzhen/2018-4-18
Lebin, Xie/Manager
(Name / Title) (Name and signature of the person responsible)

CAUTION

  1. Use carefully with the earphone maybe excessive sound pressure from earphones and headphones can cause hearing loss.

  2. Risk of explosion if the battery is replaced by an incorrect type, dispose of used batteries according to the instructions.

  3. The product shall only be connected to a USB interface of version USB2.0

  4. The adapter shall be installed near the equipment and shall be easily accessible.

  5. EUT Temperature:-10℃~+65℃.

  6. Charging Temperature: 0℃~+55℃

  7. Adapter1: CU-52AX
    Input: AC 100-240V~50/60Hz, 200mA
    Output: DC 5.0V 1.2A
    Adapter2: CU-52YX
    Input: AC 100-240V~50/60Hz, 200mA
    Output: DC 5.0V 1.2A

  8. The device complies with RF specifications when the device is used at 5mm from your body.

  9. To prevent possible hearing damage, do not listen at high volume levels for long periods.

  10. Earphones and USB cables are shielded.

Operating Frequency Band (RF):

  • E-GSM900: 880-915MHz (TX), 925-960MHz (RX);
  • DCS1800: 1710-1785 MHz (TX), 1805-1880 MHz (RX);
  • WCDMA BAND I:1920-1980 MHz (TX), 2110-2170 MHz (RX);
  • WCDMA BAND VIII: 880-915MHz (TX), 925-960MHz (RX);
  • LTE BAND1: 1920-1980MHz(TX), 2110-2170MHz(RX);
  • LTE BAND3: 1710-1785MHz (TX), 1805-1880MHz (RX);
  • LTE BAND8: 880 -915MHz(TX), 925 -960 MHz(RX);
  • LTE BAND40: 2300-2400MHz (TX), 2300-2400MHz (RX);
  • Bluetooth: 2400-2483.5MHz (TX/RX) ;
  • Wi-Fi: 2412-2472 MHz (TX/RX);
  • GPS:1.57542GHz
  • FM:87.5 MHz-108 MHz.

Modulation mode:

  • GMSK,8PSK(GSM)
  • BPSK/QPSK/16-QAM (WCDMA)
  • QPSK/16-QAM/64QAM (LTE)
  • GFSK, 1/4π- DQPSK, 8DPSK (BT)
  • GFSK (BLE)
  • OFDM for IEEE 802.11g/n(HT-20) /n(HT-40) (WiFi) BPSK(GPS)

RF Output Power:

  • GSM900:33dBm±2dB
  • GSM1800:30dBm±2dB
  • WCDMA BAND I/VIII:24dBm+1.7dB/-3.7dB
  • LTE BAND1/3/8/40:23dBm+2.7dB /-2.7dB
  • Bluetooth:0-10 dBm
  • WiFi: 14dBm +/-3dB

Specific Absorption Rate (SAR) Certification
THIS DEVICE MEETS INTERNATIONAL GUIDELINES FOR EXPOSURE TO RADIO WAVES

Body parts Test value Test distance Limit
Head 0.526W/Kg10g 0mm 2.0 W/Kg10g
Body 0.890W/Kg10g 5mm 2.0 W/Kg10g

DOC information available on the Internet: www.infinixmobility.com

Declaration of conformity

We: INFINIX MOBILITY LIMITED
(Name of manufacturer)
RMS 05-15, 13A/F SOUTH TOWER WORLD FINANCE CTR HARBOUR CITY 17 CANTON RD TST KLN HONG KONG.(Address)
declare under our responsibility that the product

  • Product name: Mobile phone
  • Model No.: X5515
  • Trademark: Infinix

(Including product name, model No. descriptions, versions and supplementary characteristics) to which this declaration refers conforms with the relevant standards or other standardizing documents

  • 3.1a Health: EN 50360:2017
    • EN 50566:2017
    • EN 62479:2010
  • 3.1a Safety:EN60950-1:2006+A11:2009+A1:2010+A12:2011+ A2:2013
  • 3.1b EMC: Draft ETSI EN 301 489-1 V2.2.0 (2017-03)
    • Draft ETSI EN 301 489-17 V3.2.0 (2017-03)
    • Draft ETSI EN 301 489-19 V2.1.0 (2017-03)
    • Draft ETSI EN 301 489-52 V1.1.0 (2016-11)
    • EN 55032:2015
    • EN 55035: 2017
    • EN61000-3-2:2014
    • EN61000-3-3:2013
  • 3.2 Radio: ETSI EN 301 511 V12.5.1 (2017-03)
    • ETSI EN 301 908-1 V11.1.1 (2016-07)
    • ETSI EN 301 908-2 V11.1.1 (2016-07)
    • ETSI EN 301 908-13 V11.1.2 (2017-07)
    • ETSI EN 300 328 V2.1.1 (2016-11)
    • ETSI EN 303 413 V1.1.1 (2017-06)
    • Final Draft ETSI EN 303 345 V1.1.7(2017-03)
    • Software Version:X5515-H398DEG-GO-PR1-180322V9 Hardware Version:V1.0
    • Adapter1: CU-52AX
    • Input: AC 100-240V~50/60Hz, 200mA
    • Output: DC 5.0V 1.2A
    • Adapter2: CU-52YX
    • Input: AC 100-240V~50/60Hz, 200mA
    • Output: DC 5.0V 1.2A
    • Li-ion Battery: BL-30VX
    • Voltage: 3.85V
    • Capacity: 3000mAh/3050mAh(min/typ)
    • Limited Charge Voltage: 4.4V
  1. Notified body involved: TÜV Rheinland LGA Products GmbH, 0197.
  2. Performed conformity assessment according to Directive Annex III Module B of the 2014/53/EU Radio Equipment Directive (RED) and issued the EU-type examination certificate.
  3. This declaration of conformity is issued under the sole responsibility of the manufacturer.
  4. The object of the declaration described above conforms with the relevant Union harmonization legislation: Directive 2014/53/EU
    Other Union harmonisation legislation where applicable

Place and date of issue (of this DoC): Shenzhen/2018-5-2 Lebin, Xie/Manager
(Name / Title)
(Name and signature of the person responsible)

Know your phone

  1. Earphone Jack
  2. Front camera
  3. Camera
  4. Volume Button
  5. Power Button
  6. USB Jack
  7. Front Flash
  8. Flash

Getting started

Insert SIM card & Memory card

  1. Switch off the mobile phone and remove the rear cover.
  2. Insert the SIM card in the card slot properly.
  3. Finally, replace the rear cover of the mobile phone.

Charging the phone

You can charge your device using a charger or by connecting it to the computer using a USB cable (which comes with the phone).
Note : Only use a compatible charger; immovable inbuilt battery.
The phone can be restarted by holding the power button for 10 seconds.

CAUTION

  1. Use carefully with the earphone maybe excessive sound pressure from earphones and headphones can cause hearing loss.
  2. Risk of explosion if the battery is replaced by an incorrect type, dispose of used batteries according to the instructions.
  3. The product shall only be connected to a USB interface of version USB2.0
  4. The adapter shall be installed near the equipment and shall be easily accessible.
  5. EUT Temperature:-10℃~+65℃.
  6. Charging Temperature: 0℃~+55℃
  7. Adapter1: CU-52AX
    • Input: AC 100-240V~50/60Hz, 200mA
    • Output: DC 5.0V 1.2A
    • Adapter2: CU-52YX
    • Input: AC 100-240V~50/60Hz, 200mA
    • Output: DC 5.0V 1.2A
  8. The device complies with RF specifications when the device is used at 5mm from your body.
  9. To prevent possible hearing damage, do not listen at high volume levels for long periods.
  10. Earphones and USB cables are shielded.

Operating Frequency Band (RF):

  • E-GSM900: 880-915MHz (TX), 925-960MHz (RX);
  • DCS1800: 1710-1785 MHz (TX), 1805-1880 MHz (RX);
  • WCDMA BAND I:1920~1980 MHz (TX), 2110 ~ 2170 MHz (RX);
  • WCDMA BAND VIII: 880-915MHz (TX), 925-960MHz (RX);
  • LTE BAND1: 1920-1980MHz (TX), 2110-2170MHz (RX);
  • LTE BAND3: 1710-1785MHz (TX), 1805-1880MHz (RX);
  • LTE BAND8: 880-915MHz (TX), 925-960MHz (RX);
  • LTE BAND38: 2570-2620MHz (TX), 2570-2620MHz (RX);
  • LTE BAND40: 2300-2400MHz;
  • Bluetooth: 2400-2483.5MHz (TX/RX) ;
  • Wi-Fi: 2412~2472 MHz (TX/RX); GPS:1.57542GHz
  • FM:87.5 MHz to 108 MHz.

Modulation mode:

  • GMSK,8PSK(GSM)
  • BPSK/QPSK/16-QAM (WCDMA)
  • QPSK/16-QAM/64QAM (LTE)
  • GFSK, 1/4π- DQPSK, 8DPSK (BT)
  • GFSK (BLE)
  • OFDM for IEEE 802.11g/n(HT-20) /n(HT-40) (WiFi)
  • BPSK(GPS)

Specific Absorption Rate (SAR) Certification
THIS DEVICE MEETS INTERNATIONAL GUIDELINES FOR EXPOSURE TO RADIO WAVES

Body parts Test value Test distance Limit
Head 0.551W/Kg10g 0mm 2.0 W/Kg10g
Body 0.811W/Kg10g 5mm 2.0 W/Kg10g

DOC information available on the Internet: www.infinixmobility.com

Declaration of conformity

We: INFINIX MOBILITY LIMITED
(Name of manufacturer)
RMS 05-15, 13A/F SOUTH TOWER WORLD FINANCE CTR HARBOUR CITY 17 CANTON RD TST KLN HONG KONG.(Address)
declare under our responsibility that the product

  • Product name: Mobile phone
  • Model No.: X5515F,X5515F-LTE
  • Trademark: Infinix

(Including product name, model No. descriptions, versions and supplementary characteristics) to which this declaration refers conforms with the relevant standards or other standardizing documents

  • 3.1a Health: EN 50360:2017
    • EN 50566:2017
    • EN 62479:2010
  • 3.1a Safety:EN60950-1:2006+A11:2009+A1:2010+A12:2011+ A2:2013
  • 3.1b EMC:Draft ETSI EN 301 489-1 V2.2.0 (2017-03)
    • Draft ETSI EN 301 489-17 V3.2.0 (2017-03)
    • Draft ETSI EN 301 489-19 V2.1.0 (2017-03)
    • Draft ETSI EN 301 489-52 V1.1.0 (2016-11)
    • EN 55032:2015
    • EN 55035: 2017
    • EN61000-3-2:2014
    • EN61000-3-3:2013
  • 3.2 Radio: ETSI EN 301 511 V12.5.1 (2017-03)
    • ETSI EN 301 908-1 V11.1.1 (2016-07)
    • ETSI EN 301 908-2 V11.1.1 (2016-07)
    • ETSI EN 301 908-13 V11.1.2 (2017-07)
    • ETSI EN 300 328 V2.1.1 (2016-11)
    • ETSI EN 303 413 V1.1.1 (2017-06)
    • Final Draft ETSI EN 303 345 V1.1.7(2017-03)
    • Software Version: X5515F-H398F-O-180323V11
    • Hardware Version: V1.0
    • Adapter1: CU-52AX
    • Input: AC 100-240V~50/60Hz, 200mA
    • Output: DC 5.0V 1.2A
    • Adapter2: CU-52YX
    • Input: AC 100-240V~50/60Hz, 200mA
    • Output: DC 5.0V 1.2A
    • Li-ion Battery: BL-30VX
    • Voltage: 3.85V
    • Capacity: 3000mAh/3050mAh(min/typ)
    • Limited Charge Voltage: 4.4V
  1. Notified body involved: TÜV Rheinland LGA Products GmbH, 0197.
  2. Performed conformity assessment according to Directive Annex III Module B of the 2014/53/EU Radio Equipment Directive (RED) and issued the EU-type examination certificate.
  3. This declaration of conformity is issued under the sole responsibility of the manufacturer.
  4. The object of the declaration described above conforms with the relevant Union harmonization legislation: Directive 2014/53/EU Other Union harmonization legislation where applicable

Place and date of issue (of this DoC): Shenzhen/2018-4-20
Lebin, Xie/Manager
(Name / Title) (Name and signature of person responsible)

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals