Netgear FS726TP ProSafe 24 Port 10/100 Smart Switch Installation Guide
- June 12, 2024
- NETGEAR
Table of Contents
Netgear FS726TP ProSafe 24 Port 10/100 Smart Switch
Start Here
Follow these instructions to set up your smart switch.
Prepare to Install Your Smart Switch
- Prepare a PC with an Ethernet adapter and a CD ROM drive.
- Before proceeding with the smart switch installation, familiarize yourself with the contents of the Resource CD, especially the manuals.
First, Install the Smartwizard Discovery Utility on a PC
- Power on your PC, let the operating system boot up completely, and log in as needed.
- Insert the Resource CD for the Smart Switch Series into your CD-ROM drive. The CD main page shown below will load.
- Click Install SmartWizard. Follow the prompts to complete the installation of the SmartWizard GearDiscovery utility.
- Click OK when done.
Next, Connect Your Smart Switch in the Correct Order
Note: These instructions assume you are using DHCP in your network. If you are using static IP addressing in your network, configure the switch IP address before connecting it to your network. In the absence of a DHCP server, the switch will default to 192.168.0.239 for its IP address. To configure the switch before connecting it to your network, set up the PC with an IP address of 192.168.0.x subnet, and connect the PC to the switch. Then, use the Smartwizard Discovery utility as illustrated below to configure the switch.
- Connect the smart switch to your network.
- Power on the switch.
- Verify that the PC with the SmartWizard GearDiscovery utility is on the same subnet as the switch.
Now, Configure the Switch with the SmartWizard Discovery Utility
-
Double-click the SmartWizard GearDiscovery icon on your desktop or in the Windows Start menu Programs to run the utility and view this screen.
-
Click Discover to find your switch in the network.
The SmartWizard GearDiscovery utility finds the switch and displays its MAC Address, IP Address, and model number. If you cannot configure your switch, verify that the cable connections are secure, that the IP address configuration of the PC is in the same subnet as the switch, and click the Discover button. -
Click to select the line displaying the details of your switch. If there are multiple smart switches in your network, be sure to select the one you want to configure.
-
Click Web Access to view the switch log-in screen.
-
Enter the default password of password in lowercase letters and click Login.
The switch will display the switch settings main page. Configure the switch for your network. Consult the manual on the CD or the online help in the switch for assistance with configuration procedures.
After you log in to the switch, the main Web Access menu displays.
Use the configuration menu options to configure your switch.
Power Over Ethernet Option
If your switch includes the Power over Ethernet option, such as the FS726TP, you can use it to power Ethernet devices like VoIP desk phones or suitably equipped wireless access points. Simply plug a Cat5 or better cable into the port and the switch will determine if it is safe to provide power along with the data. See the hardware guide for more details.
Troubleshooting Tips
Here are some tips for correcting simple problems you may have.
-
Be sure to power on your PC and smart switch in the correct sequence.
Follow this sequence. Turn off the smart switch and computer. First, turn on the smart switch and wait two minutes. Next turn on the computer. -
Make sure the Ethernet cables are securely plugged in.
For each powered-on computer connected to the smart switch with a securely plugged-in Ethernet cable, the corresponding smart switch LAN port status light will be lit. -
Make sure the network settings of the computer are correct.
In most cases, computers should be configured to obtain an IP address automatically via DHCP. For help with this, please see the animated tutorials on the CD or the Reference Manual Appendix C on the CD.
If your network uses static IP addresses, be sure the switch and computer are configured with valid IP addresses.
Technical Support
Thank you for selecting NETGEAR products.
Register Your Product
- To register, go to: http://www.NETGEAR.com/register
- Go to http://www.NETGEAR.com/support for support information.
© 2005 by NETGEAR, Inc. All rights reserved. NETGEAR is a registered trademark of NETGEAR, Inc. in the United States and/or other countries. Other brand and product names are trademarks or registered trademarks of their respective holders. Information is subject to change without notice.
FAQ’s
What is the Netgear FS726TP ProSafe switch used for?
The Netgear FS726TP ProSafe switch is used to create a network infrastructure, allowing multiple devices to connect and communicate with each other efficiently. It offers advanced features suitable for small to medium-sized businesses.
How many ports does the FS726TP switch have?
The Netgear FS726TP ProSafe switch has 24 10/100 Ethernet ports for connecting devices.
Can this switch provide Power over Ethernet (PoE)?
Yes, the FS726TP switch supports Power over Ethernet (PoE) functionality on some of its ports, allowing you to power compatible devices like IP phones and cameras directly through the Ethernet cable.
How many PoE ports does the FS726TP switch have?
The FS726TP switch has 12 PoE-capable ports.
What is the maximum PoE power budget for this switch?
The maximum PoE power budget for the FS726TP switch is 190 watts.
Is the FS726TP suitable for small businesses?
Yes, the FS726TP switch is designed for small to medium-sized businesses that require basic managed features and PoE capabilities.
What management options are available for the FS726TP switch?
The FS726TP switch can be managed through a web-based graphical user interface (GUI), allowing you to configure settings, monitor the network, and perform basic management tasks.
Does the FS726TP switch support VLANs?
Yes, the FS726TP switch supports Virtual LANs (VLANs), which allow you to segment your network into separate virtual networks for better traffic management and security.
What is the maximum data transfer rate per port on the FS726TP switch?
The FS726TP switch supports Fast Ethernet (10/100 Mbps) data transfer rates on each of its ports.
Can I set up Quality of Service (QoS) on this switch?
Yes, the FS726TP switch supports basic Quality of Service (QoS) features, which allow you to prioritize certain types of network traffic over others to ensure smooth performance for critical applications.
Is there a warranty included with the FS726TP switch?
Yes, the Netgear FS726TP ProSafe switch typically comes with a limited warranty, and the duration of the warranty may vary based on the region and purchase terms.
Reference Link:Netgear FS726TP ProSafe 24 Port 10/100 Smart Switch Installation Guide
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>