Jabra OTE070 Elite Active 65t True Wireless Earbuds User Manual

Jabra OTE070 Elite Active 65t True Wireless Earbuds

Specifications

• Made in China
• Model: OTE070 / OTE071 / CPB070
• Declaration of Conformity can be found on www.jabra.com/doc

Product Usage Instructions

Welcome
Thank you for using the Jabra Elite 65t. We hope you will enjoy it!

Jabra Elite 65t Overview

The Jabra Elite 65t includes the following:

• Jabra Elite 65t earbuds
• On-the-go charging case

Included Accessories

• EarGels in sizes S, M, and L
• Micro-USB cable

How to Wear
To wear the Jabra Elite 65t:

1. Insert the earbud into your ear.
2. Rotate to fit comfortably.
3. Ensure the microphone is pointing toward your mouth.

Changing EarGels
To change the EarGels:

1. For the optimal audio experience, try each of the different EarGel sizes (S, M, and L).
2. The fit should feel tight and secure in your ear.
3. The medium EarGel is pre-mounted on the earbuds. Ensure it is firmly attached.

How to Charge
The Jabra Elite 65t offers up to 5 hours of battery in the earbuds and 2 recharges in the charging case, providing up to 15 hours of playtime.

Opening the Charging Case
To open the charging case:

1. Firmly hold the charging case.
2. Press the small tab on the lid while opening it.

Charging the Earbuds
To charge the earbuds:

1. Place the earbuds in the charging case.
2. Close the lid.
3. The battery LED inside the charging case will flash red, yellow, or green when the lid is opened to indicate the earbuds’ current battery status.
4. It takes approximately 2 hours to fully recharge the earbuds.
5. If the earbuds are at low battery, you can get up to 1 hour of playtime by charging them in the charging case for 10 to 20 minutes.

Charging the Charging Case
To charge the charging case:

1. Plug the charging case into a USB power supply or certified wall charger.
2. It takes approximately 2 hours to fully charge the earbuds and the charging case.

FAQ
For frequently asked questions, please refer to the Jabra Elite 65t user manual available at https://manual-hub.com/

How to Care for Your Earbuds
To care for your earbuds:

• Keep them clean and dry.
• Avoid exposing them to extreme temperatures or moisture.
• Store them in the provided charging case when not in use.

Replacement Accessories
If you need replacement accessories for your Jabra Elite 65t, please refer to the Jabra Elite 65t user manual available at https://manual-hub.com/

Using a Replacement Earbud
To use a replacement earbud:

1. Remove the existing earbud from the earbud housing.
2. Insert the replacement earbud into the housing.
3. Ensure it is firmly attached.

Using a Replacement Charging Case
To use a replacement charging case:

1. Remove the existing earbuds from the charging case.
2. Place the replacement earbuds in the charging case.
3. Close the lid.

© 2018 GN Audio A /S. All rights reserved. Jabra® is a trademark of GN Audio A/S. The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by GN Audio A/S is under license.
Made in China
MODEL: OTE070 / OTE071 / CPB070
Declaration of Conformity can be found on www.jabra.com/doc

Welcome
Thank you for using the Jabra Elite Active 65t. We hope you will enjoy it!

Jabra Elite Active 65t features

• 4-microphone-enhanced sound
• Customize your music
• Proven wireless connection
• Up to 15-hours battery
• Voice Assistant enabled
• 2-year warranty (dust & water). Registration is required with the Jabra Sound+ app

Jabra Elite Active 65t overview

Jabra Elite Active 65t earbuds

On-the-go charging case

Included accessories

How to wear

Insert the earbud into your ear and rotate it to fit comfortably. Ensure the microphone is pointing toward your mouth.

Changing EarGels
For the optimal audio experience, it is recommended to try each of the different EarGel sizes. The fit should feel tight and secure in your ear. The medium EarGel is pre-mounted on the earbuds. Ensure the EarGel is firmly attached.

How to charge

With up to 5 hours of battery in the earbuds, and 2 recharges in the charging case, the Jabra Elite Active 65t offers up to 15 hours of playtime.

Opening the charging case
Firmly hold the charging case and press the small tab on the lid while opening the lid.

Charging the earbuds
Place the earbuds in the charging case and close the lid. The battery LED inside the charging case will flash red, yellow or green when the lid is opened to indicate the earbud’s current battery status.

It takes approx. 2 hours to fully recharge the earbuds. If the earbuds are at low battery, you will get up to 1 hour of playtime by charging them in the charging case for 10 to 20 minutes.

Charging the charging case
Plug the charging case into a USB power supply or certified wall charger. It takes approx. 2 hours to fully charge the earbuds and the charging case.
Note : non-certified chargers may take longer to charge.

What the LEDs mean

**How to pair

**

Pairing with a smartphone

1. Ensure the right earbud is turned off and not in the charging case. To manually turn off the earbud, hold the Multi-function button until the LED flashes red.
2. Next, hold the Multi-function button on the right earbud for 5 seconds until you hear the connection instructions in the earbud and the LED flashes blue. Release the button, and follow the voice-guided instructions to pair to your smartphone.
3. You may need to hold the Volume Down button for 1 second on the left earbud to turn it on.

How to use

Turn the earbuds on/off

• Place the earbuds in the charging case to turn them off, or remove them from the charging case to turn them on.
• The earbuds can be turned on or off individually by holding the Multi-function button on the right earbud, or the Volume Down button on the left earbud, until the LED flashes green (on) or red (off).

Calls & music

HearThrough

• HearThrough utilizes built-in microphones to enable you to pay attention to your surroundings and engage in conversation without needing to remove the earbuds.
• HearThrough settings can be configured using the Jabra Sound+ app.

Sidetone

• Sidetone enables you to hear your voice when you are on a call.
• Sidetone settings can be configured using the Jabra Sound+ app.

Auto-pause music

• When you remove an earbud from your ear while listening to music, the music will automatically pause.
• To unpause the music, place the earbud back into your ear within 60 seconds. After 60 seconds (or when mono playback is preferred) the music can be unpaused by pressing the Multi-function button.
• Auto-pause music settings (available February 2018) can be configured using the Jabra Sound+ app.

Auto power off

• To conserve battery the right earbud will automatically power off when it is out of range of your smartphone for 15 minutes and is not in the charging case, or when it has been inactive for 1 hour.
• The left earbud will automatically power off when it has not had a link with the right earbud for 15 minutes and is not in the charging case.
• To power the earbuds on, place them in the charging case, or hold the Multi-function button on the right earbud, and/or the Volume down button on the left earbud, until the LED flashes.

Mono earbud use

• The right earbud can be used alone for mono playback or for calls. For volume and/or skip track controls, please use your connected smartphone.
• When both earbuds are turned on and within 20 centimeters (8 inches) of one another, they will automatically relink.

Multiple call handling
The earbuds can accept and handle multiple calls at the same time.

Multi-use

• The earbuds can be paired to two smartphones at once and can accept multiple incoming calls from either smartphone.
• To pair two smartphones, use the normal pairing process separately for each smartphone (refer to section 5).

Note : Voice assistant and redial will be activated on the last paired smartphone.

Voice guidance and languages

• Voice guidance can be turned on/off (available February 2018) and the language can be changed using the Jabra Sound+ app.
• The following languages are available: English, French, German, Japanese, and Chinese.

Voice assistant

• To activate your smartphone’s Voice assistant (e.g. Siri, Google NowTM, etc) hold the Multi-function button when not on a call.
• Voice assistant settings (available February 2018) can be configured using the Jabra Sound+ app.

Update firmware

• The Jabra Elite Active 65t can be updated to the latest firmware version using the Jabra Sound+ app.
• If notifications are enabled in the Jabra Sound+ app you will receive an automatic notification when a firmware update is available.

How to reset

• Resetting the earbuds clears the list of paired devices and resets all settings.

Jabra Sound+ app

Support

FAQ
View the FAQs on Jabra.com/eliteactive65t.

How to care for your earbuds

• Always store the earbuds in the charging case and safely protect them.
• To prevent the depletion of the battery lifetime or capacity, avoid storing the earbuds in hot or cold environments, such as a closed car in summer, or in winter conditions.
• It is recommended to keep the earbuds between 15°C and 25°C (59°F and 77°F).
• Do not store the earbuds for extended periods without recharging them (max. three months).
• If the earbuds or the charging case become dirty, it is recommended to clean them with a soft, lint-free cloth that has been dampened with clean water.

Replacement accessories
Replacement or additional accessories can be purchased online at jabra.com/accessories.

Using a replacement earbud
Before using a replacement earbud it will need to be synced with your current earbud and the charging case.

To sync, place the replacement earbud into the charging case along with your current earbud, and close the lid. The LED on the charging case may flash purple to indicate that the firmware is being updated. Please wait until the LED stops flashing purple before opening the charging case.
Note : if the replacement earbud was the right earbud, you will need to re-pair it to your smartphone, and then update the firmware using the Jabra Sound+ app.

Using a replacement charging case

• Before using a replacement charging case for the first time, it will need to be synced with your current earbuds and charged for 1 hour.
• To begin syncing, place your current earbuds inside the replacement charging case, and close the lid. The LED on the charging case may flash purple to indicate that the firmware is being updated. Please wait until the LED stops flashing purple before opening the charging case.

jabra.com/eliteactive65t

References

• Manual-Hub.com - Free PDF manuals!
• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>