Jabra OTE28 Halo Smart Headphone User Manual
- June 16, 2024
- Jabra
Table of Contents
Jabra OTE28 Halo Smart Headphone
Product Information
Specifications
- Model: OTE28
- Made in: China
- Talk Time: Up to 17 hours
- Music Time: Up to 15 hours
- 10mm speakers
- Dust and water resistance: IP54 rated
Product Overview
The Jabra Halo Smart is a high-quality wireless headset designed for
comfortable all-day wearing. It features a contoured neckband with magnetic
cord management, allowing for easy cable storage. The headset also includes a
dedicated voice control button for instant voice commands and integrated wind
noise protection for clear calls anywhere.
Included Accessories
- USB charging cable
- 4 EarGel sizes: large, medium, small, and extra small
How to Wear
The Jabra Halo Smart is designed to be worn around the neck. To ensure a
comfortable and stable fit, follow these steps:
Shaping the Neckband
The neckband can be shaped to fit your neck by bending it at the flex zones.
This allows for personalized comfort and stability.
Getting the Correct Fit
The headset comes in four EarGel sizes. It is recommended to find the EarGel
that best fits your ear for optimal sound experience. The correct EarGel
should feel tight and seal out background disturbances.
Using the Magnetic Earbuds
The earbuds can be magnetically snapped together for convenient cable
management. When the earbuds are snapped together, your music will be paused.
Alternatively, you can attach the earbuds magnetically to the neckband.
How to Charge
To charge the headset, follow these steps:
- Gently pull open the charging cover to expose the micro-USB charging port.
- Connect the headset to a power supply using the supplied Jabra charging cable. You can also use your mobile phone charger to charge the headset.
FAQ
-
Q: How long does the battery last?
A: The Jabra Halo Smart offers up to 17 hours of talk time and up to 15 hours of music time. -
Q: Can I use voice commands with the headset?
A: Yes, the headset has a dedicated voice control button that allows for instant voice commands with Google Now, Siri, and Cortana. -
Q: Is the headset water-resistant?
A: Yes, the Jabra Halo Smart has an IP54 rating for dust and water resistance.
© 2016 GN Netcom A/S. All rights reserved. Jabra® is a registered trademark of GN Netcom A/S. All other trademarks included herein are the property of their respective owners. The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by GN Netcom A/S is under license. (Design and specifications are subject to change without notice).
MADE IN CHINA
- MODEL: OTE28
Declaration of Conformity can be found on www.jabra.com/CP/US/declarations- of-conformity.
WELCOME
Thank you for using the Jabra Halo Smart. We hope you will enjoy it!
JABRA HALO SMART FEATURES
- Best in Class talk time – Up to 17 hours of talk time, and up to 15 hours of music time
- Premium Call Experience – Integrated wind noise protection for calls anywhere
- Premium Wireless Sound – 10mm speakers
- All-day durability – Dust and water resistance IP54-rated
- One Touch Voice Control – Dedicated Google Now/Siri/Cortana button for instant voice commands
- All-day comfortable fit – Contoured all-day wearing design, with magnetic cord management
- Audio made smarter with announcements – Text messages, Calendars and email readouts (Android phones)
- Never miss a call – Vibrate alert
PRODUCT OVERVIEW
INCLUDED ACCESSORIES
HOW TO WEAR
Halo Smart is designed to be worn around the neck.
SHAPING THE NECKBAND
The neckband can be shaped to fit your neck by bending the neckband at the
Flex zones, for the ultimate comfort and stability.
GETTING THE CORRECT FIT
- The headset is supplied with four EarGel sizes: large, medium, small and extra small.
- It is highly recommended to find the EarGel that best fits your ear for the optimal sound experience. The correct EarGel will feel tight and will seal out background disturbances.
USING THE MAGNETIC EARBUDS
The earbuds can be magnetically snapped together for convenient cable
management. When the earbuds are snapped together your music will be paused.
Alternatively, the earbuds can be magnetically attached to the neckband.
HOW TO CHARGE
To charge the headset, gently pull open the charging cover to expose the micro-USB charging port and connect to a power supply. It is recommended to charge the headset using the supplied Jabra charging cable, however it is possible to charge the headset using your mobile phone charger. It takes approx. 2 hours to fully charge the headset.
NOTE:
The lifetime of the battery may be significantly reduced if the headset is
left uncharged for a long period of time. It is recommended to recharge the
headset at least once a month.
BATTERY STATUS
To see and hear the current battery status, tap the Volume up or Volume down button when not listening to music or on a call.
HOW TO CONNECT
TURNING THE HEADSET ON/OFF
- On: Press and hold the Multi-function button for 3 seconds. The LED will flash green.
- Off: Press and hold the Multi-function button for 5 seconds. The LED will flash red.
CONNECT TO YOUR MOBILE PHONE
- Turn on Bluetooth on your mobile phone.
- Ensure that the headset is off, and then press and hold (5 secs) the Multi-function button until the LED flashes blue and you hear an announcement in the headset.
- Wear the headset and follow the voice-guided connection instructions.
HOW TO USE
CALLS & MUSIC
HEADSET VOICE GUIDANCE
Headset voice guidance are voice announcements intended to guide you or
give headset status updates (e.g. connection and battery status).
HOW TO TURN VOICE GUIDANCE ON/OFF
Voice guidance is enabled by default.
- Voice Guidance On: Ensure the headset is powered on, and then simultaneously press and hold the Volume up button and the Voice button for 1 second.
- Voice Guidance Off: Ensure the headset is powered on, and then simultaneously press and hold the Volume Down button and the Voice button for 1 second.
PHONE VOICE COMMANDS (SIRI, GOOGLE NOW, CORTANA)
Phone voice commands enable you to speak to Siri/Google Now/Cortana on your
mobile phone using your headset. For more information on using Siri, Google
Now, or Cortana, please refer to your phone’s user manual.
- Activate Siri/Google Now/Cortana (phone dependent)
Tap the Voice button, when not on a call
MULTIPLE CALL HANDLING
The headset can answer or reject calls when you are already on a call.
VIBRATE ALERT
- The headset will vibrate whenever it is powered on/off, connected to your mobile phone, or when there is an incoming call.
- Vibrate Alert is enabled by default, and can be disabled using the Jabra Assist app (Android only).
HOW TO RESET THE HEADSET
Resetting the headset will clear the list of connected devices.
- Reset the headset: Ensure the headset is powered on, and then simultaneously press and hold the Volume up button and the Multi-function button for 5 seconds. You will then need to restart the headset.
JABRA ASSIST APP
The Jabra Assist app is a free app for iOS or Android devices that enables you to:
- Enable/disable vibration
- Enable/disable message read-out
- And more.
- Android download – Google Play
- iOS Download – App Store
SUPPORT
FAQ
View the FAQs on jabra.com/halosmart.
HOW TO CARE FOR YOUR HEADSET
- Always store the headset with the power off and safely protected.
- Avoid storage at extreme temperatures (above 85°C/185°F or below -20°C/-4°F). This can shorten battery life and may affect the headset.
TECHNICAL SPECIFICATIONS
- Weight: 38 g (1.34 oz)
- Dimensions: L 159 mm x W 43 mm x H 179 mm
- Microphones: Omni-directional microphone
- Microphone frequency range: 200 Hz – 6.3 kHz
- Microphone SLR: 10dB +/- 5dB
- Speaker type: 10 mm neodymium magnet speaker
- Speaker sensitivity: 97 ±3dB/mW at 1 KHz
- Speaker impedance: 16 ohm
- Speaker max input power: 8 mW
- Speaker frequency range: 20 Hz – 20 kHz
- Operating range: Up to 10 m/33 ft (phone dependent)
- Bluetooth version: 4.0
- Paired devices: Up to 8, connected to two at the same time (MultiUse™)
- Supported Bluetooth profiles: Headset profile (v1.2), hands free profile (v1.6), A2DP (v1.2), AVRCP (v1.4)
- Talk time: Up to 17 hours
- Music time: Up to 15 hours
- Standby time: Up to 22 days
- Charging time: Approx. 2 hours
- Operating temperature: -10°C to 55°C (15°F to 131°F)
- Storage temperature: -20°C to 85°C (-4°F to 185°F)
- Pairing passkey or PIN: 0000
- Product materials: Silicone, PC/ABS, PMMA, PA, PET, TPE and TPU
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>