Shenzhen HDR-AC5PLUS Plus 4K optical Zoom Camera Oda Digital Instruction Manual

Shenzhen HDR-AC5PLUS Plus 4K optical Zoom Camera Oda Digital Instruction Manual

Safety Instructions

• Do not drop, impact or puncture the camera.
• Do not expose the camera to high/low temperature, excessive dust, humidity or strong vibration, otherwise the product may be damaged.
• Do not use corrosive chemicals or solvents to clean the product.
• Do not disassemble this camera or attempt to repair or modify it in any manner, if there is any damage to the camera, stop using the camera and return this product to the store where you have purchased it from, the product will be sent back to the company and fix.

Cautions

• Keep children away from the product, accessories and its packaging materials, it may cause suffocation.
• Do not put the product in a fire, otherwise it may cause an explosion.
• Remove the battery if the camera is not going to be used for long periods, and please fully-charged the battery before using it again.

Getting to Know Your Camera

Standard Accessories

4K Ultra HD Camera Infrared remote control
Battery HDMI Cable Charger User Manual
USB Cable The above are all accessories, if there is anymissing, please contact the seller for replacement.

Charging the Battery

Before using the camera, you must load and charge the battery

Charging with the Charger

Note: Insert the battery into the charger to charge it, the indicator light will be red when charging; The indicator light will turn green when the charging is completed.

Charging with USB Cable (Direct Charge)

1. Please Connect the USB Cable to the charging adapter when camera is running low.
2. Connect the other side to the Camera’s USB charging interface.
3. The indicator light will be red when charging; The indicator light will turn green when the charging is completed.

Note:

1. When using the charger, please install the battery in the charger slot correctly.
2. For direct charge, please use the 5V/2A charging adapter for charging.
3. When using the USB Cable to charge, if charge
   during working condition, the camera will automatically shut down after the charging adapter is powered off.

Component Introduction

Rear View

For the function description of the related parts in the above figure, please refer to the following table.

Front View

Getting Started

Inserting an SD Card

1. Open the SD cover.
2. Insert the memory card in the direction shown until you hear “Clicks”.
3. Close the SD cover. Open the SD cover and press the memory card.

Note:

1. When using for the first time, format the SD card On this unit. The SD card needs to be U3.
2. Do not forcefully remove the SD card while working, otherwise it may cause loss of files or machine damage.

Loading Battery

1. Push the OPEN button to the right as shown.
2. The battery compartment pops open, inserts a lithium battery.
3. Close the battery compartment.

Note

1. Do not violently open the battery compartment and remove the battery.
2. The battery needs to be loaded into the battery compartment in a correct direction.

Recording Mode

1. Press the power button or open the screen to turn on the camera, push the mode switch button to the video mode to enter the video mode.
2. Set the option of the function you need by the option setting menu.
3. Press the Rec button to start shooting.
4. Press the Rec button again to stop shooting.

Video setting menu
Enter the menu by button or touch, you can set the resolution, white balance, exposure and other function parameters to get better video results

1. Press the power button to turn on the camera.
2. Press the menu button or touch the icon on the screen to enter the menu.
3. Touch the “Setup” icon on the screen to enter the menu.

Function

1. Enter the photo mode, press “Menu button” or press button, to enter the main menu.
2. Touch “Function” to enter the option menu.
3. By switching the T/W zoom button or swipe screen to select the setting option freely.
4. By touching or pressing the “Photo” button to select the option, for example: Time-lapse Video, enter the option menu, select the option you need, press to return to the main menu, press interface.

Photo mode

1. Press the power button or open the screen to turn on the camera, push the mode switch button to the Photo mode to enter the Photo mode.
2. Set the option of the function you need by the option setting menu.
3. Press the “Photo “button, finish the photo .

Photo setting menu
Enter the menu by button or touch. You can set the resolution, white balance, exposure and other function parameters to get better photo results in the menu.

1. Press the power button to turn on the camera.
2. Press the menu button or touch the icon on the screen to enter the menu.
3. Touch the”Setup” icon on the screen to enter the menu.

Function
By using various features in this option menu allows you to take pictures easier and faster

Setting Mode

Through this setting menu, you can customize the function parameters such as language, date and frequency.

Play Back

This function allows you to play recorded video or photo in the camera

Video

Photo

Slide Show

Connecting to TV

When connect the HDMI to your camera’s HDMI output and your TV, the image on your screen can also be displayed on your TV screen.

1. Press the power button or open the screen to turn on the camera and enter the standby state.
2. Take out the HDM cable and connect the camera with the HDMI connector of the TV.
3. Turn the TV to the HDMI channel, the preview screen will appears on the TV.

Connecting to the Computer

This function allows you to use your camera as a MSDC disk or PC Camera

MSDC Mode

1. Power on the camera and enter the standby mode.
2. Connect the camera and computer with the cable.
3. The screen will display two options: “MDSC” and “PC Camera”.
4. Select the “MSDC ” by turning the Zoom button.
5. Press photo button to confirm.

PC Camera

1. Power on the camera and enter the standby mode.
2. Connect the camera and computer with the cable.
3. The screen will display two options: “MDSC”and “PC Camera”.
4. Select the “PC Camera “by turning the Zoom button.
5. Press photo button to confirm.
   Note When use the camera as a PC Camera, the camera is not able to record video.

APP Using

Downloading the APP

For Android: Search “D Video” in Play store and download For IOS: Search “D Video” in App store and download. Or scan the QR Code to download the APP.

http://app.appurl.me/79814987572

How to Connect Wi-Fi

1. Press the power button or open the screen to turn on the camera, push the mode switch button to the SET mode to enter the “SET” mode.
2. Switch the T/W zoom button to select the Wi-Fi function.
3. Press the “Photo” button to turn on the Wi-Fi function.
4. Open your phone and open the Wi-Fi search the name with HDVxxxxxx, Enter the password : 12345678 .

Get Started

Troubleshooting

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be located or operating in conjunction with any other antenna or transmitter.
2ALYUHDR-AC5PLUS

Specific Absorption Rate (SAR) information This device meets the government’s requirements for FCC exposure limits set forth for an uncontrolled environment. This device was tested for typical bodyworn operations with the back of the Camcorder kept 0 mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain an 0 mm separation distance between the user’s body and the back of the Camcorder. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>