OSHKOSH SCM2 Next Generation Delivery Vehicle Instruction Manual
- June 16, 2024
- OSHKOSH
Table of Contents
OSHKOSH SCM2 Next Generation Delivery Vehicle
Specifications
- Product Name: Oshkosh Next Generation Delivery Vehicle (NGDV)
- Date: July 20th, 2023
Device Usage
The Oshkosh Next Generation Delivery Vehicle (NGDV) is equipped with a
Telematics Control Unit (TCU) that provides various functionalities.
TCU Install Location
The TCU is mounted in a module box located at the bottom of the center
console of the vehicle.
Instruction
Oshkosh Next Generation Delivery Vehicle (NGDV) Telematics Overview
Device Usage
-
The Telematics Control Unit is an electronic control module that is integrated into the NGDV controller area network (CAN). Data transmitted over the CAN will come to a collection point or central gateway where the TCU can collect signals and messages broadcasted over the network. The TCU transmits collected data over cellular communication to a data broker or end point. After the data has been received by the data broker the TCU clears the transmitted data from its memory and continues to collect and send new data while the vehicle is operational.
-
Example use cases/data
-
GPS location
-
Trip data (time, distance, fuel, etc.)
-
Accelerometer/gyroscope data
TCU Install Location
The TCU is mounted in a module box which is installed at the bottom of the center console of the vehicle.
TCU Distance to Driver
The as-modeled seat is the most forward position that meets the 5-95th percentile of all operators.
- 22.25in from the seat edge to TCU
- 22.8in from the seat base to TCU
Antenna Install Location
The antenna is mounted inside the center of the overhead console.
Cable length : 159 inches (4033 mm) TCU to back of the Antenna.
- This is comprised of 1 harness segment from TCU to in-line connector of approximately 30in
- Plus 1 harness segment of in-line connector to Antenna of approximately 121in
- Plus about 8in for the antenna pigtail.
Regulatory Compliance statement
Radiofrequency radiation exposure Information
This equipment complies with FCC and IC radiation exposure limits set forth
for an uncontrolled environment. This equipment should be installed and
operated with minimum distance of 20 [*] cm between the radiator and your
body. This transmitter must not be co-located or operating in conjunction with
any other antenna or transmitter
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>