Crosses Intelligent Technology ZSCYZS1 Smart Cylinder User Manual
- June 16, 2024
- Crosses Intelligent Technology
Table of Contents
Crosses Intelligent Technology ZSCYZS1 Smart Cylinder
Product Information
Specifications
- Compliance : FCC Part 15
- Operating Distance : Minimum 20cm between the device and your body
- Antenna : Supplied antenna
Product Usage Instructions
FCC Compliance
The device complies with Part 15 of the FCC Rules. This means it has been
tested and found to be compliant with the limits for a Class B digital device.
Minimum Operating Distance
When using the device, ensure there is a minimum distance of 20cm between
the device and your body. This precaution is necessary to maintain safe levels
of radiation exposure.
Antenna Usage
Use only the supplied antenna with the device. The supplied antenna has
been specifically designed and optimized for optimal performance and
compatibility with the device.
Frequently Asked Questions (FAQ)
-
Q: Can I use a different antenna with the device?
A: It is recommended to use only the supplied antenna. Other antennas may not provide optimal performance or may not be compatible with the device. -
Q: Is there a maximum operating distance?
A: There is no specific maximum operating distance mentioned in the user manual. However, it is advisable to maintain a reasonable proximity to ensure stable and reliable connectivity.
User Manual-Smart Cylinder
TUVA BLE VERSION
Packing Accessories
Please check the packing box and accessories when you got the item in hand.
Product Specification
Reader View
Dimension
INSTALLATION STEPS
- Please use the screw driver to take off the screw on the back knob position, refer the below Pic.1:
Pic 1 - Please insert the cylinder to the existed lock and fix the cylinder with the long screw as picture 2.
Pic 2 - Please use the screw driver to fasten the screw on the back knob position, refer the below picture 3:
- Please take off the reader cover with the magnet or sucker (included in our accessories bag),assemble 1xCR123a alkaline battery, refer the below picture 4:
-
Please test with your fingerprint under the factory state, any fingerprint will unlock the door lock, refer the below picture 5:
-
Please test the lock with key card after you configure the lock with Tuya smart APP(Refer the Part 6).
Notice the keycard or fingerprint can only be enrolled by the Tuya smart APP, so it is important to install this app in your mobile before start daily use
Tuya APP Settings
Please download the Tuyasmart or Smart life on Apple store or Google play. also you can scan the QR code below to download the APP directly.
Please register one account with your E-mail or mobile number.
- Sign Up
- Enter mobile or mail Get Verification Code
- Enter the code sent to your mail or mobile
- Set password and login
Intelligent Configuration
Please run the Tuya smart APP and click “Add Device” on the right top
position for auto scan:
- Step 1 Add Device
- Step 2 Activate the lock Click “Add”
- Step 3 Done
Function Description
Under Tuya smart APP interface, you can see the features for the smart locks,
such as Member /unlock records and settings etc.
Add User Fingerprint
Under Tuya smart APP setting, you can click the fingerprint management and add
the fingerprint.
- Step 1 Stick Add Fingerprint
- Step2 Select User
- Step3 : Start Capturing
- Step 4 : 5 Times and done
Add User Card
Under Tuya smart APP setting, you can click the card Management and add the
caro
- Step1 : Click Add Card
- Step2: Select User
- Step3 : Tap Card on the lock induction area
Smart Linkage and Settings
Under the settings, you can click the smart linkage for more scene and more
options for the features upon the using condition.
Passage Mode
Under Tuya smart APP setting, you can disable” automatic lock switch”, under
this setting the lock will be in always open state, you can press any valid
fingerprint to cancel this passage mode.
Reset the Lock
Under Tuya smart APP setting, you can click the “Remove Device” to reset the
lock and the lock will be set to factory state, you can use any fingerprint to
unlock the lock.
Sales and Service Terms
- Please read the manual carefully before use!
- Limited 1-year Electronic Warranty Limited Lifetime Mechanical and Finish Warranty
- This S1 product comes with a 1-year Limited Warranty on Electronic Parts and a Limited lifetime. Mechanical and Finish Warranty against defects in materials and workmanship under normal use to the original residential user. Proof of purchase and ownership is required for the warranty to be in effect.
- Any error or question in our manual or sales term, please feel free to contact with us.
- For any wrong operation or installation to the user, we do not responsible for the duty.
- For the damage caused by anthropic factor or inevitable reason, we do not pay for the loss or maintain for free, please check our after sale service terms.
- Please do not take apart the lock if you are not technician, if necessary, please make the operations under the guide of technician.
- Notice : there maybe a little difference for product pictures with real product, please subject to our real products.
FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions .
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE : This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC ‘s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>