ILME AXYR 10A Connector User Manual
- June 16, 2024
- ILME
Table of Contents
ILME AXYR 10A Connector
Product Information
- Specifications
- Model: 3ISTY10A – 11.22
- Wire Gauges:
- Unprepared Conductor: 26 to 14 AWG (0.14 through 2.5 mm2)
- Prepared Conductor with Crimped End-Sleeve: 26 to 16 AWG (0.14 through 1.5 mm2)
- Wire Stripping Length: 0.35 to 0.43 in. (9 to 11 mm)
Product Usage Instructions
- Attention
- Do not operate the product while it is under voltage.
- Do not use this product for interrupting current.
- Wire Requirements
- This product is designed for use only with copper wire.
- Wire Gauges
- Unprepared Conductor: Suitable for wire gauges from 26 to 14 AWG (0.14 through 2.5 mm2).
- Prepared Conductor with Crimped End-Sleeve: Suitable for wire gauges from 26 to 16 AWG (0.14 through 1.5 mm2).
- Wire Stripping Length
- The recommended wire stripping length is between 0.35 to 0.43 in. (9 to 11 mm).
FAQs
- Q: Can I use this product with aluminum wire?
- A: No, this product is designed for use only with copper wire.
- Q: What wire gauges are compatible with the unprepared conductor?
- A: The unprepared conductor is suitable for wire gauges from 26 to 14 AWG (0.14 through 2.5 mm2).
- Q: What is the recommended wire stripping length?
- A: The recommended wire stripping length is between 0.35 to 0.43 in. (9 to 11 mm).
- Q: Can I use this product to interrupt current?
- A: No, this product is not designed for interrupting current.
PRECAUTION
CAUTION
- Not to interrupt the current
- For use only with copper wire
- Suitable wire gauges:
- Unprepared conductor: 26 to 14 AWG (0.14 through 2.5 mm2 )
- Prepared conductor with crimped end-sleeve: 26 to 16 AWG (0.14 through 1.5 mm2)
- Wire stripping length: 0.35 to 0.43 in. (9 to 11 mm)
WIRING
SOLID OR FERRULED WIRE
(CSA* ≥ 0,75 mm2 / 18 AWG)
STRANDED WIRE (all CSA)
SOLID OR FERRULED WIRE (CSA ˂ 0,75 mm2/ 18 AWG)
- CSA = Cross-Sectional Area 3ISTY10A – 11.22
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>