Puig BMW S1000R Motorcycle Windshield Instructions
- June 4, 2024
- Puig
Table of Contents
www.puig.tv [email protected]
www.puigusa.com [email protected]
BMW S1000R ’21
REF 20861N PROTECTOR MOTOR R19 / R19 CRASH PAD / R19 STURZPADS
INSTRUCTIONS TO ASSEMBLE
Remove the fasteners that subject the chassis to the engine. Mount the
protectors on each own side as the figure below shows. Tight the set, and
place the caps. All the screws replaced, should be tightened to the torque
specified in the oem maintenance manual for your motorcycle. if no torque
specifications are provided in the oem maintenance manual, may be used 54Nm
for all M10 screws.
Medium strength liquid thread-locker (i.e. “Loctite”) should be used to secure
all screws, bolts and nuts. All screws, bolts and nuts should be checked after
driving the first 50 km to ensure that all are tightened to the proper torque.
FOR TO ASSEMBLE THE CRASH PADS, IF YOU ARE NOT A TRAINED MECHANIC, PLEASE CONTACT A SPECIALIST. MOTOPLASTIC, S.A. TAKES NO RESPONSIBILITY FOR DAMAGES CAUSED BY IMPROPER INSTALLATION. THE USE OF CRASH PADS DO NOT GUARANTEE A FULL PROTECTION IN CASE OF ACCIDENT. MOTOPLASTIC-PUIG DECLINE ANY RESPONSIBILITY IN CASE OF MOTORCYCLE DAMAGE.
Accessory verified in the basic configuration of the motorcycle. For models with extra factory settings. We cannot assure its compatibility, except for prior consultation. We decline any eventual claim.
| ID. | DESCRIPTION | QTY. | REF.: |
|---|---|---|---|
| 1 | Covers set | 2 | TAPAPROTECR19-D/I |
| 2 | M10/150×110 DIN 912 screw | 1 | M2TM10150110A9B |
| 3 | M10/150X60 DIN 912 screw | 1 | M2TM10150060A9B |
| 4 | M10 DIN125/A washer | 2 | M2AM10DIN125AZB |
| 5 | Nylon Protector M10 50mm | 2 | PROTECNCR19-145 |
| 6 | Right aluminum spacer (Black) (46mm) | 1 | CASQU502-0-0502 |
| 7 | Left aluminum spacer (Black) (22mm) | 1 | CASQU503-0-0503 |
| 8 | Metallic displacer (Black) | 1 | PLATI406-0-0406 |
| 9 | M10/150×75 screw | 1 | M2TM10150075A9B |
| 10 | Aluminum spacer (Black) (20mm) | 1 | CASQU504-0-0504 |
| 11 | M10 DIN6923 nut | 1 | TUERCAD6923M10Z |
REF 20861N – MOUNTING INSTRUCTIONS
RIGHT SIDE
1 ASSEMBLY MONTAJE
MOUNTING VIDEO
2 ASSEMBLY MONTAJE 3 ASSEMBLY MONTAJE
LEFT SIDE
IT IS NECESSARY TO REMOVE THE COVER
Created by: www.rrdisseny.cat