La Reveuse LARB1803G Personal Smoothie Blender User Guide

La Reveuse LARB1803G Personal Smoothie Blender

IMPORTANT SAFEGUARDS

PLEASE READ ALL INSTRUCTIONS BEFORE OPERATING THE  BLENDER AND SAVE THIS INSTRUCTION. WARNING!

1. Do not use appliances for other than the intended purpose. When using electrical appliances, basic safety precautions should always be followed, including the following.
2. To protect against the risk of electrical shock, do not put the cord, plug, or base in water or other liquid.
3. This appliance has a polarized plug ( one wide blade) that reduces the risk of electric shock. The plug fits only one way into a polarized outlet. Do not defeat the safety purpose of the plug by modifying the plug in any way or by using an adapter. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not modify the plug in any way.
4. Do not operate any appliance with a damaged cord or plug or if the appliance malfunctions, or is dropped or damaged in any manner. Contact Customer Service for assistance in obtaining a replacement.
5. The length of the cord used on this appliance was selected to reduce the hazards of becoming tangled in or tripping over a longer cord. If a longer cord is necessary, an approved extension cord may be used. The electrical rating of the extension cord must be equal to or greater than the rating of the appliance. Care must be taken to arrange the extension cord so that it will not drape over.
6. Unplug the cord from the outlet when not in use, before putting on or taking off parts, and before cleaning or assembling.
7. Do not pull, twist, or mistreat the power cord.
8. The use of attachments, including canning jars, not recommended or sold by the appliance manufacturer may cause fire, electric shock, or a risk of injury to persons and void any applicable warranty.

USAGE INSTRUCTIONS

Where can we use the : blender?

1. Always use your: blender on a clean, flat, hard, dry surface, never on cloth or paper. which may block the fan vents and cause overheating.
2. This appliance accessory is intended for household use only. Use for food or liquids only.
3. Do not use outdoors if exposed to inclement weather elements. Do not use it in the rain or wet conditions.
4. Do not let the cord hang over the edge of the table or counter, or touch hot surfaces, including the stove.
5. Close supervision is necessary when any appliance is used by or near children.
6. The countertop or tabletop where can be pulled on by children or accidentally tripped over.
7. Do not place on or near a hot gas or electric burner or in a heated oven.
8. Do not place a blender jar in the freezer filled with food or liquid. This will freeze and damage the cutting unit, jar, and motor.
9. Do not use the appliance for other than intended use.

Please check before you use: the blender.

1. Always completely assemble the cross blade and cup before placing it on the power base; never insert or store the cross blade in the base unless attached to a cup.
2. Do not use a broken, chipped, or cracked blender jar.
3. Do not use broken, cracked, or loose cutting blades. Be certain that the cross blade is completely and firmly screwed onto the cups or Party Mug before operating the appliance, To reduce the risk of injury.
4. Always operate the blender with the lid in place.
5. Before using the cross blade, check the gasket to make sure it is not damaged and it is completely seated in the cross blade unit before each use.
6. Make sure the blade is completely dry before re-inserting the gasket.

BLENDER SAFEGUARDS

1. Avoid any contact with blades or moveable parts.
2. Keep hands and utensils away from the cutting blade or jar while blending to reduce the risk of severe injury to persons or damage to the blender. A rubber spatula may be used but must be used only when the blender is not running.
3. Blades are sharp; handle carefully-especially when cleaning inside blender jar.
4. NEVER BLEND CARBONATED BEVERAGES! Released gases can cause pressure to build up and the container to burst, resulting in possible injury.
5. Never run the   without food or liquid contents in any of the cups.
6. Do not blend hot liquids.
7. NEVER KEEP THE BLADE RUNNING FOR MORE THAN ONE MINUTE AT A TIME, AS IT CAN CAUSE PERMANENT DAMAGE TO THE MOTOR. If the motor stops working, unplug the Power Base and let it cool for a few hours before attempting to use it again. Your: has an internal thermal breaker that shuts off the unit when it overheats. Letting the thermal breaker cool down should allow the Power Base to reset.
8. Do not attempt to defeat the cover interlock mechanism.
9. Always operate the blender with the cover in place.
10. Never feed blender container food by hand, always use the plunger.
11. If the cutting unit blades lock and do not move, it will damage the motor. Do not use.

MICROWAVE SAFEGUARDS

• CAUTION:
  NEVER MICROWAVE UNVENTED, SEALED CONTAINERS AS THEIR CONTENTS MAY EXPAND WITH HEAT PRESSURE AND EXPLODE, RESULTING IN INJURY OR PROPERTY DAMAGE. DO NOT USE THE SOLID LID IN THE MICROWAVE, USE ONLY THE VENTED LIDS.

• WARNING:
  NEVER MICROWAVE CUPS WITH THE BL ADE ATTACHED TO THE CUP. THE METAL IN THE BLADE MAY SPARK, OR FIRE AND MAY RESULT IN INJURY OR DAMAGE TO PROPERTY.

1. To prevent possible injury, always use protective oven gloves and direct steam away from hands and face.
2. Follow the precautions and recommendations found in your microwave oven instruction manuals, specifically the overall heating times, but never run the microwave longer than 2 minutes consecutively. Heat for 2 minutes. Let the food sit for 2 minutes, remove from microwave, open the container, and carefully stir, then heat for 2 minutes again.
3. Do not use excessive amounts of time when heating water or liquids in the microwave, and do not exceed more than 2 minutes consecutively.
4. Do not overheat the liquid.
5. Superheated Water-Liquids such as water, coffee, tea or soups are able to be overheated beyond the boiling point without appearing to be boiling. Visible bubbling or boiling when the container is removed from the microwave is not always present. This could result in very hot liquids suddenly boiling over when the container is disturbed or a spoon or other utensil ( such as a : blade) is inserted into the liquid. To reduce the risk of injury to persons.
6. Stir the liquid both before and halfway through heating it to avoid eruption.
7. Use extreme care when inserting a spoon or other utensils into the container.
8. Avoid heating baby food or formula in cups.
9. Don’t defrost frozen beverages in: cups (especially carbonated beverages). Even if the container is opened, pressure can build up. This can cause the container to burst, possibly resulting in injury.
10. Hot foods and steam can cause burns. Be careful when removing   cups from the microwave when they contain hot foods and liquids.
11. Do not overcook food. Carefully attend to the appliance when  Cups are placed inside an operating microwave.
12. After heating, allow the container to stand in the microwave for a short time before removing the container.
13. After microwaving, always use heat-resistant pads to handle: cups. Allow the ingredients to settle for a moment and then carefully open the lid pointing the container away from your body as escaping steam and moisture may cause scalding burns.

Box Contents

1. Motor Base
2. Blades Assembly
3. 20 oz cup
4. 24 oz cup
5. Sip&Seal Lid
6. Solid Lid
7. Power Cord
8. Control Panel (On/Off, Blend, Pulse)
9. User guide

P.S

• Cup and 2 types lids quantity maybe be subject to change as marketing demand.
• If LARB1803 series equip with 2 pieces or more Cups and Lids , cup size just 2 options 20 oz. or 24 oz. That is about 600ml and 700ml. And lids quantity is same as cups quantity.Please refer concern advertising and description .

Technical Specifications and Features

• Voltage: 120V 60Hz
• Power: 600 Watt
• Speed: 20000-23000rpm
• Cup capacity: 20 oz. ( 600ml)
• Food Grade Tri tan Material, BP A-free Cups
• 6 Leaves Stainless Steel blade , Strong enough to crush ice
• High Quality Pure Copper Motor, Long Service Life Design
• Perfect for making nutritious shakes, juice blends, smoothies and more
• Sip&Seal lids for drinks on the go

P.S Cup and 2 types lids quantity maybe be subject to change as marketing demand. If LARB1803 series equip with 2 pieces or more Cups and Lids , cup size just 2 options 20 oz. or 24 oz. That is about 600ml and 700ml. And lids quantity is same as cups quantity. Please refer concern advertising and description .

• Voltage: 120V 60Hz
• Power: 1000 Watt
• Speed: 22000-24000rpm
• Cup capacity: 24 oz. ( 700ml)
• Food Grade Tri tan Material, BP A-free Cups
• 6 Leaves Stainless Steel blade , Strong enough to crush ice
• High Quality Pure Copper Motor, Long Service Life Design
• Perfect for making nutritious shakes,juice blends, smoothies and more
• Sip&Seal lids for drinks on the go
• IC Controlled Electronic Operation Panel

P.S Cup and 2 types lids quantity maybe be subject to change as marketing demand. If LARB1803 series equip with 2 pieces or more Cups and Lids , cup size just 2 options 20 oz. or 24 oz. That is about 600ml and 700ml. And lids quantity is same as cups quantity.Please refer concern advertising and description .

How to Use the Blender

ASSEMBLY AND OPERATION

Note: Please read the 1st-3rd page safeguard again before you use it.thanks.

1. Take out the blender and remove all packaging material and labels from the appliance.

2. Wash the lids, cups and blades assembly in warm, soapy water with a soft cloth.
   CAUTION: Handle the blades assembly with care when washing, as the blades are very sharp.

3. Rinse and dry thoroughly.

4. Cups, lids and blades assembly are all dishwasher safe. It is recommended that the lids and blades assembly be placed on the top rack. Ensure that the blades assembly are removed from the cups before placing in the dishwasher.

5. Wipe the motor base clean with a damp cloth.

6. Place the motor base on a clean, dry, level surface such as a counter or table top.

7. Ensure that the blender is unplugged from its power source, take cup and fill with ingredients up to the max fill line .

8. Place the blades assembly onto the cup and twist it on tightly until you have a good seal. (Fig. 1)

9. Turn the cup upside down and place it onto the motor base, aligning the tabs on the cup with the motor base. Turn it clockwise, now , it is ready for use.(Fig. 2)

10. Plug in the blender.Press down on the top of the cup in short intervals to activate. (Fig. 3)

11. When you have reached your desired consistency, stop the appliance by removing your hand from the cup. Wait for the motor to stop running. Then turn the cup counterclockwise (Fig. 4) and pull straight up to remove. (Fig. 5)

12. Turn the cup upright and remove the blades assembly by twisting the blades assembly counterclockwise. Be sure to store the blades assembly attached to an empty cup when not in use.

13. Place the Sip & Seal lid onto the cup, twist to seal and enjoy!

14. Make sure that the motor base is unplugged when not in use.

Leafy Herbs
Mixing| 20 oz. /24 oz.| Batters
Dips

Sauces

|

20 oz. /24 oz.

| Vinaigrettes
Salad Dressings
Simple Sauces

Frozen Blending

|

20 oz. /24 oz.

| lee
Frozen Fruit
Ice Cream

Nutrient Juices /Smoot hies

|

20 oz. /24 oz.

| Fruits
Vegetables
Leafy Greens
Note:
I .When blending sauces and soups, make sure they’re cooled to room temperature first – the containers are not intended for hot blending.
2. This product is not intended for dry blending , Please DO NOT process dry ingredients without adding liquid to the cup.

How to Resetting the Motor Thermostat

The features a unique safety system which prevents damage to the unit’s motor and drive system should you inadvertently overload your appliance. If the appliance is being overloaded, the motor will stop. To reset the appliance, follow the resetting procedure below:

1. Unplug the appliance from the electrical outlet.
2. Remove and empty the cup and ensure that no food is jamming the blades Assembly.
3. Allow the appliance to cool for approximately 30 minutes.
4. Re-install the cup onto the base and re-plug the appliance into the electrical outlet.
5. Proceed to use the appliance as before while making sure not to exceed the recommended maximum Capacities.

How to Operate Electronic Panel

(just for blender LARB1803G)

Note: LARB 1803G equip with Electronic Panel, we just mention operation for Electronic Panel here. please refer others on page 9 and 1 0.Plug in the blender, the ON/OFF light will flush red ,indicating the blender is in standby mode.

• STANDARD MODE (ON/OFF)
  Press the ON/OFF button to start the blender in standard mode. The button will turn white color and the blender will run at maximum speed. Press the ON/OFF button again, the blender stop to work ,and the ON/OFF light will flush red again.Note that the blender will turn off automatically after running continuously for 1 minute.

• BLEND MODE
  Press the blend button to start the blender in blend mode. The button will turn white color and the blender will automatically alternate between 50% and 100% of the unit’s maximum speed. Press the ON/OFF button to end blend mode. Note that the blender will turn off automatically after running continuously for 1 minute.

• PULSE MODE
  Press and hold the pulse button to run the blender in pulse mode. The button will turn white color and the blender will run at maximum speed for as long as the button is pressed. Release the button to end pulse mode.Note that the blender will turn off automatically after running continuously for 1 minute.

Trouble Shooting

Motor doesn’t start or Blades Assembly doesn ‘ t

rotate

| For the cups , make sure that the tabs are seated in the  slots and turned clockwise.

Cup is leaking.

| Make sure that your lid or Blades Assembly is properly assembled to the cup. Leaking may occur ifit is misaligned when twisted onto the cup. Turn the lid tightly clockw is e.

Unit doesn’t turn on.

| Make sure the unit is plugged in. Rotate and press down on the cup to turn the unit on.Make sure the Blades Assembly is properly assembled to the cup and that it is not misaligned.

Unit doesn’t turn off.

| Unplug the power cord from the electrical outlet and call customer service for support.
Doesn ‘ t mix well.| Pulse ingredients for best results. Press down on the cup in short in tervals , but not more than I minute.
Lid/ Blades Assembly wil not properly align to the cup.| Set the cup on a level surface. Place the lid or Blades Assembly on top of the cup and altgn the threads so that the li d/bl ades sit flat on the cup. Twist clockwise so that the

li d/bl ades evenly align to the cup until you have a tight seal.

It appear unusual smell when initial use

| It  is normal that appear unusual  smell in the initial uses.

It  will  not appear this kind of situation after several uses

. It will appear unusual smell if use the product  for  too I ong time , then you must close the product let it

cool for 30 minutes.

How to Maintenance

• CAUTION: Make sure that the motor base is unplugged from the power source before inserting or removing any attachment and before cleaning.
• CAUTION: DO NOT immerse the motor base into water or any other liquid.
• CAUTION: Handle the blades assembly with care, as the blades are very sharp.

1. Separate/remove all parts from each other.
2. Clean the motor base with a damp cloth and wipe dry.
3. Place the cups, lids and blades in the top rack of the dishwasher. Or Carefully hand wash the lids, cups and blades assembly in warm, soapy water with a soft cloth.
4. Always clean the product before storing.
5. Store the veuse blender upright. Do not place anything on top. Store the cups and the rest of the attachments along side the appliance where they will not be damaged and won’t cause a hazard.
6. Store in a dry dark place,keep it out of sunlight.

Warranty

• We would like to thank you for choosing the La Rêveuse blender.
• La Reveuse will replace any part (usually, cups or Blades Assembly, excluding Motor Base) which fails 1 years from date of original purchase, provided the failure is due to a defect in material or workmanship under normal use within the operation specifications.
• The only exception shall be when proof of purchase or installation is provided and then the warranty period shall be from the date thereof.
• La Reveuse blender are warranted to be free from defects in materials and workmanship under normal use within the operation specifications for a period of 1 year limited warranty from the date of original purchase.
• General Conditions La Reveuse’s obligation to the customer under these warranties shall be limited, at its option, to replacement items covered by these warranties. Prior to return of covered items, the customer must obtain a return goods authorization number from La Rêveuse and at La
• Rêveuse’s option, return the item freight prepaid at the customer’s expense. Any covered item replaced under these warranties will be returned prepaid standard freight to the original point of shipment. Damage to any part of this blender because of misuse, misapplication, negligence, alteration, accident, installation, or operation contrary to our instructions, incompatibility with accessories not installed by La Reveuse, or damage caused by freezing, flood, fire, or Acts of God are not covered by this warranty. In all such cases, regular charges will apply. This limited warranty does not include service to diagnose a claimed malfunction in this unit.
• IMPORTANT: Carefully pack item to avoid damage in shipping. Be sure to attach a tag with purchase information, include purchase date ,your name, complete address, model number phone number order ID and what you believe is the problem with the item before packing . Please contact with us if you need any support, support@reveuseblender.com

FREQUENTLY ASKED QUESTIONS

What is the brand of the personal smoothie blender mentioned in the information provided?

The brand of the personal smoothie blender is La Reveuse.

Can you specify the color of the La Reveuse LARB1803G Personal Smoothie Blender?

The color of the blender is Silver.

What special features does the La Reveuse LARB1803G Personal Smoothie Blender have?

The special features include Safety Lock, Portable, Mixers, and a Removable Blade.

What is the capacity of the blending cup in the La Reveuse LARB1803G Personal Smoothie Blender?

The blending cup has a capacity of 24 Fluid Ounces (700 ml).

Can you provide the product dimensions of the La Reveuse LARB1803G Personal Smoothie Blender?

The product dimensions are 5.12 inches in diameter, 5.12 inches in width, and 14.96 inches in height.

What are the included components with the La Reveuse LARB1803G Personal Smoothie Blender?

The included components are 1xMotor Base, 1xBlade Assembly, 1x24 oz. Cup, and 1xSip&Seal Lid.

Under which style category does the La Reveuse LARB1803G Personal Smoothie Blender fall?

The style of the blender is Countertop Blender 1000W.

What are the recommended uses for the La Reveuse LARB1803G Personal Smoothie Blender?

The recommended use is for Blending.

What is the power source of the La Reveuse LARB1803G Personal Smoothie Blender?

The power source is AC.

How many speeds does the La Reveuse LARB1803G Personal Smoothie Blender have?

The blender has 1 speed.

What is the voltage of the La Reveuse LARB1803G Personal Smoothie Blender?

The voltage is 120 Volts (AC).

Is the material used in the La Reveuse LARB1803G Personal Smoothie Blender BPA free?

Yes, the material is BPA Free.

How much does the La Reveuse LARB1803G Personal Smoothie Blender weigh?

The item weight is 6.01 pounds.

What is the model number of the La Reveuse LARB1803G Personal Smoothie Blender?

The model number is LARB1803G.

What material is the blending cup made of, and is it dishwasher safe?

The blending cup is made of BPA-free food-grade material and is easy to clean, dishwasher safe (blender base is excluded).

DOWNLOAD THE PDF LINK:La Reveuse LARB1803G Personal Smoothie Blender User Guide

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>