LEXMARK X6100 Series Cartridges Scanner Driver User Guide

June 16, 2024
Lexmark

LEXMARK X6100 Series Cartridges Scanner Driver

LEXMARK X6100 Series Cartridges Scanner Driver

Safety information

  • Use only the power supply provided with this product or the manufacturer’s authorized replacement power supply.
  • Connect the power supply to an electrical outlet that is near the product and easily accessible.
  • Refer service or repairs, other than those described in the user documentation, to a professional service person.

Instruction For Use

CAUTION: Do not use the fax feature during a lightning storm. Do not set up this product or make any electrical or cabling connections, such as the power supply cord or telephone during a lightning storm.

  1. Raise the paper support and extend the paper exit tray.
    Instruction For Use

  2. Load paper, and then adjust the paper guide.
    Instruction For Use

  3. Open the scanner unit.
    Instruction For Use

  4. Unlock the scanner.
    Instruction For Use

  5. Close the scanner unit
    Instruction For Use

  6. Connect the power supply and the telephone line. See your User’s Guide for various configurations.
    Instruction For Use

  7. Replace or add an overlay, if necessary
    Instruction For Use

  8. Press Power

  9. Press to scroll, and then press Select to enter your default language, and then your default country.

Press the keypad to enter the date, time, and fax number.

1.  **01/20/03** Press **Select**
2.  **01:30** Press **Select.**
3.  **01234567890** Press **Select.**
  1. Open the scanner unit.
    Instruction For Use

  2. Remove the packaging and tape.
    Instruction For Use

  3. Insert the print cartridges.
    Instruction For Use

  4. Close the scanner unit.
    Instruction For Use

  5. Press Select, Select, Select to verify the cartridges you installed.
    Instruction For Use

  6. Press Select to align your cartridges.
    Instruction For Use
    If you are using your All-In-One with a computer, continue with the following steps.
    If you are using your All-In-One without a computer, you are finished.

  7. Turn your computer on.
    Instruction For Use

  8. Connect the USB cable.
    Instruction For Use

  9. Important! Click Cancel on all New Hardware screens.
    Instruction For Use

  10. Insert the CD.

Follow the instructions on the computer screen.

LEXMARK Logo

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals