LLTGMV Q1 Page Turning Counter Grip Strength Device Instructions

LLTGMV Q1 Page Turning Counter Grip Strength Device

Product Information

Specifications

• Model: 3RZHURQ 7

Product Usage Instructions

Unpacking and Setup

When you receive the product, carefully unpack all the components and make sure everything is included in the package:

• 3RZHURQ 7 device
• Power adapter
• User manual

Before using the device, ensure it is placed on a stable and flat surface. Connect the power adapter to the device and plug it into a power outlet.

Powering On and Off

To power on the device, press and hold the power button for a few seconds until the LED indicator lights up. To power off the device, press and hold the power button again until the LED indicator turns off.

Device Navigation

The device features a touch screen for navigation. To interact with the device, simply tap on the desired options or iconsdisplayed on the screen.

Charging the Device

When the battery is running low, connect the power adapter to the device and plug it into a power outlet. The LED indicator will show the charging progress. It is recommended to fully charge the device before initial use.

Connecting to Wi-Fi

To connect the device to a Wi-Fi network, go to the settings menu and select the “Wi-Fi” option. Choose the desired network from the available list and enter the network password if required.

Troubleshooting

If you encounter any issues with the device, refer to the troubleshooting section in the user manual. If the problem persists, contact our customer support for further assistance.

Daily maintenance and precautions

• Avoid throwing the gripper vigorously onto the ground
• Do not disassemble, modify, or repair without permission, otherwise it will not be returned
• Do not allow water or other liquids to enter the interior of this product, causing damage to the product
• Containing small parts, there is a risk of suffocation if bitten or swallowed, Prohibit use by children under 3 years old

Material: silicone+ABS

Power on and shutdown

Power on: Hold the product and press it to power on. The number of displays will be displayed, and the left indicator light will flash. Wait for “Bluetooth” connection
Shutdown: After the product is left to stand for 300 seconds, it will automatically llyshut down and reset to zero.

Bluetooth connection

Turn on the gripper, and the small dot on the left side of the display screen will flash. Turn on the gripper, and the small dot on the left side of the display screen will flash. Open the Bluetooth settings of the phone, find “BTJHO01” to pair, and the phone will display successfully, After 2 seconds of the pairing, two small points will stop flashing and extinguished

Apple lOS settings

Siri Open: You can say, “Turn on auxiliary touch.”
Manual opening : Go to “Settings- Accessibility – Touch – AssistiveTouch” and turn on the phone’sauxiliary touch function

By adjusting the sliding accuracy through tracking sensitivity, it is recommended set the sensitivity to below 1/3 of the position

Usage

When Bluetooth is not connected: Press once and count 1

When connecting Bluetooth: Press once to count 1, and at the same time, the phone simulates sliding down and left once; Quickly press twice and count twice (no counting for more than two times), while simulating sliding up and right once on the phone; Long press without counting, while simulating long press on the phone(The long press 1s likes once, the long press 5 s to open or close the atmosphere lamp).

FCC STATEMENT

1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

2. This device may not cause harmful interference.

3. This device must accept any interference received, including
   interference that may cause undesired operation.

4. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
   NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules, These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications, However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to .try to correct the interference by one or more of the following measures:

5. Reorient or relocate the receiving antenna. Increase the separation between the equipment and the receiver. Connect the equipment into an outlet on a circuit different from that to which the Consult the dealer or an experienced radio/TV technician for help

RF warning statement

The device has been evaluated to meet general RF exposure requirements, The device can be used in portable exposure conditions without restriction.

Frequently Asked Questions (FAQ)

Q: How long does it take to fully charge the device?

A: The charging time may vary depending on the battery level, but it usually takes around 2-3 hours to fully charge the device.

Q: Can I use the device while it is charging?

A: Yes, you can use the device while it is charging. However, it may take longer to charge if you are actively using it.

Q: How do I reset the device to factory settings?

A: To reset the device to factory settings, go to the settings menu and select the “Reset” option. Choose the “Factory Reset” option and follow the on-screen instructions.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>