Luma EC45S Tower Evaporative Cooler Owner’s Manual

Luma EC45S Tower Evaporative Cooler Owner’s Manual
IMPORTANT SAFETY INFORMATION: Please carefully read this manual before attempting to install or use this tower evaporative cooler. For your safety, comply with all safety instructions and warnings contained in this owner’s manual to prevent personal injury or property damage.

To view the full line of Luma Comfort products, please visit www.lumacomfort.com.

Introduction

Thank you for purchasing this evaporative cooler from Luma Comfort, the world leader in home appliances and home comfort products.

This owner’s manual provides specific operating instructions for your tower evaporative cooler. Use the evaporative cooler only as instructed in this owner’s manual.

Product Benefits

• Designed to cool smaller areas such as single rooms, office cubicles and personal spaces
• Sleek, modern design makes it an attractive addition to your home
• Tower body shape saves space
• High-efficiency, rigid cooling pad holds more water
• Powerful motor results in more powerful airflow, faster evaporation and cooler air
• Consumes as much electricity as your typical 45 watt light bulb
•  Eco-friendly evaporative cooling system cools the air by the natural process of evaporating water with no Freon or harmful chemicals
•  Adds moisture to dry environments and eliminates airborne dust particles

Important Safety Information

These instructions are not meant to cover every possible condition and situation that may occur. Please
read all instructions before using this evaporative cooler. Failure to carefully read all instructions may
result in possible electric shock or fire hazard, and will void the manufacturer’s warranty.

1. Use this evaporative cooler only as instructed in this owner’s manual. Other uses may cause electric shock, injury or fire.
2. Close supervision is required if this cooler is used near children or pets.
3. To protect against electric shock, do not immerse this cooler or its plug and cord in water.
4. If the cooler is being transported or will not be in use, disconnect it from the power supply by tightly gripping the plug and pulling it from the power outlet. Do not disconnect the power supply by pulling on the evaporative cooler’s power cord.
5. Avoid contact with any of the evaporative cooler’s moving parts.
6. Place the evaporative cooler on a level surface.
7. This evaporative cooler is intended to fit into a matching receptacle. Under no circumstances should the plug be altered in any way. An improper connection can result in electric shock.
8. If possible, avoid using extension cords with this evaporative cooler. If an extension cord is absolutely necessary, do not use more than one extension cord to operate more than one cooler.
9. Do not insert objects or allow fingers to enter into the cooler’s grills, as this may cause electric shock or bodily injury. Do not block or tamper with the evaporative cooler while it is in operation.
10. Do not run the power cord under mats or carpeting, and do not cover the power cord with runners. Arrange the power cord away from room traffic and where it can be tripped over.
11. Do not operate this evaporative cooler in the presence of flammable substances or explosives.
12. Do not place the cooler near an open flame or cooking/heating appliances.
13. This product is not intended for use in wet or damp areas.
14. If the evaporative cooler will not be in use, empty the tank of any remaining water.
15. If the cooler’s plug or power cord is damaged, do not attempt to repair the components yourself. Please contact Luma Comfort’s customer service hotline at 1-866-737-6390 or have the unit examined by an authorized service provider

SAVE THESE INSTRUCTIONS

Parts List

1. Control panel
2. Display panel
3. Remote control receiver
4. Air louvers
5. Water level indicator
6. Caster
7. Dustproof air filter
8. Cooling pad slot
9. Water tank
10. Power cord
11. Water tank knob
12. Ice pack
13. Remote control

Operating Instructions

Carefully remove all packaging materials and retain for future storage/use. Make sure there is no residual foam left in any of the components. No tools will be required to assemble this tower evaporative cooler.

Filling the Water Tank
a. Locate the water tank knob and turn it counterclockwise 90° to unlock the tank. Pull out the water tank from the back of the cooler.
b. Fill the tank with clean water. Pay attention to the water level indicator located on the front of the cooler to avoid overfilling the evaporative cooler. Do not fill the tank above the MAX water level line or below the MIN water level line. The approximate tank size of the EC45S is 1.6 gallons (6 liters).
c. Push the water tank back into the rear of the unit and turn the water tank knob clockwise 90° to lock the water tank back into place.

Using the Ice Pack
a. The Luma Comfort EC45S tower evaporative cooler includes an optional ice pack for added cooling.
b. Place the ice pack in the freezer until frozen. Do not open the ice pack or ingest its contents.
c. Open the water tank and put the ice pack into one of the water tank’s chambers.
d. The ice pack is not necessary for operation, but will help enhance the cooling effect in higher temperatures.
e. The ice pack will last approximately 4 hours before melting

Using the Remote Control
a. The Luma Comfort EC45S is equipped with a remote control. A CR2032 3V coin-type replacement battery is included for your convenience.
b. To put the battery inside the remote control, insert a coin into the slot located on the back of the remote control and turn it as directed on the remote control.
c. To use the remote control, aim it at the unit’s remote control receiver and select one of the functions on the remote control. The effective distance is approximately 24”.
d. ON/SPEED = Power ON and adjusts speed
e. OFF = Power OFF
f. TIMER = Timer function of up to 7.5 hours
g. SWING = Oscillating air louvers
h. COOLER/HUMIDIFIER = Controls cooling/humidification function
i. MODE = Adjusts the airflow mode

The Control & Display Panels

ON/SPEED & OFF Buttons
a. After the tank is filled with water, connect the tower evaporative cooler to a power outlet. The unit will beep twice, indicating that the power source is connected. The cooler will be in standby mode at this time. Press the ON/SPEED button to turn on the tower evaporative cooler.
b. To adjust the fan speed, press the ON/SPEED button again until your desired speed has been reached. To turn the tower evaporative cooler off and revert back to standby mode, press the OFF button

COOLER/HUMIDIFIER Button
a. After the desired fan speed has been selected, press the COOLER/HUMIDIFIER button to activate the cooling/humidifying function. This powers the water pump, cools the air and adds moisture to your air at the same time.
b. The snowflake icon will also be visible on the display panel once the cooling/humidifying function has been selected.

MODE Button
a. The EC45S has 3 different automatic airflow modes. Setting the airflow mode is optional.
b. To set the airflow mode, press the MODE button.

1. Manual Mode – Indicated by the three circular icons on the display panel, this allows you to set the fan speeds manually.
2. Sleep Mode – Indicated by the moon icon on the display panel, this setting will gradually lower the fan speed at different intervals, depending on the selected fan speed. If the fan speed is set to high, the cooler will run for 30 minutes on high speed, 30 minutes on medium speed and then continue to operate on low speed. If the fan is set to medium, the cooler will run for 30 minutes on medium speed and then continue to operate on low speed. If the fan speed is set to low, the cooler will run on low speed continuously.
3. Natural Mode – Indicated by the palm tree icon on the display panel, this setting will adjust the airflow speed between low, medium and high.

TIMER Button
a. This tower evaporative cooler is equipped with a 7.5 hour programmable timer. To set the timer, press the TIMER button. Each press of this button will add 0.5 hours to the set time.
b. The set time will be indicated in the middle of the display panel.

SWING Button
To activate the oscillation feature, press the SWING button. The evaporative cooler’s air louvers will automatically move from side to side, which increases air circulation and distributes air more evenly.

Maintenance

Regular cleaning and maintenance is an essential step in maintaining the longevity of your tower evaporative cooler and ensuring that it operates free of defects. Maintain your evaporative cooler by following these steps:

General Maintenance Instructions

• Always unplug the evaporative cooler from the power supply before servicing or cleaning.

• Use a soft cloth and a mild soap and warm water solution to clean the unit’s exterior. Do not use harsh cleaners, gasoline, paint thinner, benzene, etc., as these substances can damage the evaporative cooler.

•  Thoroughly dry all of the cooler’s parts with a soft cloth before reconnecting the unit to the power supply.

• If the evaporative cooler will not be in use for an extended period of time, place the unit back in its
  original carton and keep it stored in a clean, dry place.

•  The evaporative cooler’s filter and cooling pad will need to be removed prior to cleaning. Once all of the different components have been cleaned, place them back into the unit in this order: water tank, cooling pad and dust filter.

Cleaning the Dust Filter & Cooling Pad

• To prevent clogging of the dust filter, we recommend cleaning the filter at least once a month.
• To clean the dust filter, remove it from the back of the unit by pushing down on the two tabs located above the filter and pull it out. Gently scrub it with a soft brush and rinse with water. Allow it to thoroughly air dry before placing it back in the unit.
• To clean the cooling pad, first remove the dust filter to expose the pad. Remove the cooling pad from the back of the evaporative cooler, rinse it with clean water and allow it to thoroughly air dry before placing it back into the unit.

Troubleshooting

The unit should beep twice once the power supply is connected.Make sure the water tank is locked into the back of the unit.
The unit does not cool at all.| There is insufficient water in the tank.The cooler/humidifier button was not pressed.The pump is defective.| Check the water level in the tank and make sure there is enough water.Press the COOLER/HUMIDIFIER button.Contact customer service if there is an issue with the water pump.
The unit does not sufficiently cool.| The cooling pad is not sufficiently saturated with water.| Wait a few minutes for the cooling pad to be fully saturated with water.
Water is coming out of the vents.| The cooling pad may be clogged with debris.| Clean the cooling pad by rinsing it in water and allowing it to thoroughly dry.                       If the problem
persists, contact customer service.

Technical Support

Luma Comfort is committed to providing a premier service experience. If you are experiencing any
technical issues with your product related to either setup or operation, please contact our product support
team at 1-866-737-6390 or support@lumacomfort.com.

Product Specifications

Warranty

Luma Comfort products are warranted to be free from defects in workmanship or materials for one (1) year from the date of purchase. If the product is found to be defective within this period, Luma Comfort, at its sole option, will repair or replace any components that fail during normal operation. The repairs or replacement will be made at no charge to the customer for parts and labor, assuming that the customer shall be responsible for all transportation costs to and from Luma Comfort.

Luma Comfort retains the right to repair or replace (with a new or newly- refurbished replacement product) the appliance at its sole discretion

This warranty does NOT apply to the following:

• Products without a proof of purchase
• Products purchased from a source other than an authorized Luma Comfort dealer
• Cosmetic damage such as scratches or dents
• Damage caused by service performed by anyone who is not an authorized service provider of Luma Comfort
• Damage in transit
• Damage caused by accident, abuse, misuse, water, flood, fire, improper installation, maintenance negligence, commercial use for a non-commercial unit, acts of God or any other acts of nature or external causes
• Damage to a product caused by modifications or alterations without the written permission of Luma Comfort
• Normal wear and tear of parts that are designed to be replaced, such as filters or batteries
• Power failure and improper power supply such as low voltage, defective wiring or inadequate fuses
• Use of force or damage caused by external influences
• Complete or partially dismantled appliances

THE WARRANTIES AND REMEDIES CONTAINED HEREIN ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES EXPRESS, IMPLIED, OR STATUTORY, INCLUDING ANY LIABILITY ARISING UNDER ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, STATUTORY OR OTHERWISE. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, WHICH MAY VARY FROM STATE TO STATE.

IN NO EVENT SHALL LUMA COMFORT BE LIABLE FOR ANY INCIDENTAL, SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, WHETHER RESULTING FROM THE USE, MISUSE, OR INABILITY TO USE THIS PRODUCT OR FROM DEFECTS IN THE PRODUCT. SOME STATES DO NOT ALLOW THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU.

If you believe your product is defective, contact Luma Comfort for warranty service at 1-866-737-6390 or
support@lumacomfort.com. In your correspondence with Luma Comfort, please describe the problem and request a return material authorization (RMA) number. You will also need to provide the proof of purchase, return shipping address and a daytime phone number.

After a Luma Comfort representative confirms that your product is defective and is still under warranty, you will receive an RMA and return shipping instructions. Products sent to our headquarters without an RMA will be refused.

References

• Luma | Inspiring Simplicity, Unveiling Potential: – Luma-products
• Luma | Inspiring Simplicity, Unveiling Potential: – Luma-products
• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>