MagiKitch n CGL-60 Outdoor Charcoal Grill Instruction Manual
- June 16, 2024
- MagiKitch n
Table of Contents
CGL-60 Outdoor Charcoal Grill
Specifications
- Model: CG-60
- Type: Outdoor Charcoal Grill
- Manufacturer: MagiKitch’n
Product Usage Instructions
Assembly
- Unwrap and remove the four leg/caster assemblies (5).
- Lift off the frame assembly and coal screens (optional) and set aside.
- Turn the base upside down. To install the leg/caster assemblies, insert each leg/caster assembly (5) into a leg socket on the base and depress the snap button on the leg. The leg will slide into the socket and lock into the correct location.
- Flip the base with the leg/caster assemblies over into the upright position.
- Place the frame assembly onto the base with the ends of the frame overlapping the ends of the base.
- Place coal screen(s) (optional) inside the base.
- Place the cooking grid (1) onto the grid supports (2).
- Adjust the cooking grid to the desired height by pushing the locking pin (3) into the appropriate hole in the grid support.
Operation
Pile charcoal sufficiently high to provide a single layer when spread evenly and light. Replace the cooking grid and adjust it to the desired height. The charcoal will require from 15 to 20 minutes to heat evenly depending on the dryness of the charcoal and weather conditions.
WARNING: NEVER ATTEMPT TO HANDLE THE UNIT UNLESS THE UNIT IS COMPLETELY COOL. NEVER HOSE DOWN THE UNIT WHEN HOT, AS THIS MAY CAUSE POSSIBLE DANGEROUS SPATTERING, WARPING IN THE METAL, AND MAY BREAK THE WELDS.
Use and Care Instructions
For Model #CG-60 and CGL-60 Outdoor Charcoal Grill
RETAIN THIS MANUAL FOR FUTURE REFERENCE
FOR YOUR SAFETY
Do not store gasoline or other flammable vapors or liquids in the
vicinity of this appliance.
- Keep the area around appliances free and clear from combustibles
- For installation in non-combustible locations only
- WARNING: Exterior surfaces of the unit may become hot enough to cause serious burns. DO NOT touch without proper protection.
The CG outdoor charcoal grill is designed for simple and efficient transportation, setup, and operation. After unpacking your unit, assemble the unit as follows:
ASSEMBLY
- Unwrap and remove the four leg/caster assemblies (5). Lift off the frame assembly and coal screens (optional) and set aside.
- Turn the base upside down. To install the leg/caster assemblies insert each leg/caster assembly (5) into a leg socket on the base and depress the “snap button” on the leg. The leg will slide into the socket and will lock into the correct location.
- Flip the base with the leg/caster assemblies over into the upright position. Place the frame assembly onto the base with the ends of the frame overlapping the ends of the base.
- Place coal screen(s), (optional) inside the base.
- Place the cooking grid (1) onto the grid supports (2). Adjust to the desired height and push the locking pin (3) in the appropriate hole in the grid support.
OPERATION
Pile charcoal sufficiently high to provide a single layer when spread evenly and light. Replace the cooking grid and adjust to the desired height by sliding the top grid on/off the unit ( a second person is recommended if the top grid is full of product). The charcoal will require from 15 to 20 minutes to heat evenly depending on the dryness of the charcoal and weather conditions.
WARNING: NEVER ATTEMPT TO HANDLE THE UNIT UNLESS THE UNIT IS COMPLETELY COOL. NEVER HOSE DOWN THE UNIT WHEN HOT, AS THIS MAY CAUSE POSSIBLE DANGEROUS SPATTERING, WARPING IN THE METAL, AND MAY BREAK THE WELDS.
PARTS LIST
CG – 60 PARTS LIST
The CGL outdoor charcoal grill is designed for simple and efficient transportation, set up, and operation. After unpacking your unit, assemble the unit as follows:
ASSEMBLY
- Unwrap and remove the four leg/caster assemblies (5). Remove coal screens (7)(optional) and set aside.
- Turn the base pan (4) upside down. To install the leg/caster assemblies insert leg/caster assembly (5) into the leg socket on the base pan (4) and depress the “snap button” on the leg. The leg will slide into the socket and will lock into the correct location.
- Flip base pan with leg/caster assembles over into the upright position.
- Place coal screen(s), (7) (optional) inside the base pan (4).
OPERATION
Pile charcoal sufficiently high to provide a single layer when spread
evenly and light. Replace the cooking grid and adjust to the desired height by
sliding the top grid on/off the unit ( a second person is recommended if the
top grid is full of product). The charcoal will require from 15 to 20 minutes
to heat evenly depending on the dryness of the charcoal and weather
conditions.
WARNING: NEVER ATTEMPT TO HANDLE THE UNIT UNLESS UNIT IS COMPLETELY COOL. NEVER HOSE DOWN THE UNIT WHEN HOT, AS THIS MAY CAUSE POSSIBLE DANGEROUS SPATTERING, WARPING IN THE METAL, AND MAY BREAK THE WELDS.
CGL – 60 PARTS LIST
WARRANTY
MagiKitch’n appliances are designed to give you long and satisfactory service if installed and operated by our instructions. This machine has been carefully tested, but despite such tests, there may be, in very rare cases, a defect not immediately noticeable. In such cases, the defect would become apparent within a few weeks of operation. To protect you, we warrant this appliance against defective workmanship and material for 1 year. See warranty statement for specific details.
NOT WARRANTED:
Accident to, misuse of harsh chemical cleaners or natural wear of this appliance.
IMPORTANT : DO NOT destroy any defective part —- IT MUST BE RETURNED FOR
REPLACEMENT under this warranty.
When writing, be sure to mention the Serial Number and Model Number appearing
on the nameplate on the front of your equipment.
FAQ
- Q: Can I store gasoline or other flammable liquids near the grill?
- A: No, for your safety, do not store gasoline or other flammable vapors or liquids in the vicinity of this appliance.
- Q: Can I place the grill on combustible surfaces?
- A: No, this grill should only be installed in non-combustible locations.
- Q: How can I prevent burns from touching the exterior surfaces of the grill?
- A: The exterior surfaces of the unit may become hot enough to cause serious burns. Do not touch without proper protection.
MAGIKITCH’N INC
509 Route 3A Bow, NH 03304 603-225-6684
FAX: 603-225-8497
www.magikitchn.com