QAZQA 104084 Outdoors Industrial Wall Lamp Instruction Manual
- June 16, 2024
- QAZQA
Table of Contents
QAZQA 104084 Outdoors Industrial Wall Lamp
Specifications
- Model: Femke WL 1 Black 104084
- Power Supply: IP44 220-240V~
- Frequency: 50Hz
- Maximum Power Consumption: Max.35W
Installation
- Identify the incoming supply cables:
- LIVE (Brown or Red)
- EARTH (Green & Yellow)
- NEUTRAL (Blue or Black)
- Connect the cables to the fitting:
- LIVE to LIVE
- EARTH to EARTH
- NEUTRAL to NEUTRAL
- Make sure the connections are secure.
- Turn ON the product.
Operating the Product
- Use the ON/OFF switch to control the product.
- When the switch is in the OFF position, the product is turned off.
- When the switch is in the ON position, the product is turned on.
Maintenance
- Regularly clean the product with a soft, dry cloth.
- Avoid using abrasive cleaners or solvents that may damage the product.
- Do not attempt to disassemble or repair the product yourself.
- Contact a qualified technician for any maintenance or repair needs.
Troubleshooting
If you experience any issues with the product, refer to the FAQs section below or contact our customer support.
Safety Precautions
Femke WL 1 Black 104084
SAFETY INSTRUCTION
Please study the instruction manual and the below information carefully before
installing or using this product.
Please keep this user manual for further reference
-
The luminaires may only be installed by authorized and qualified technicians according to the valid regulations for electrical installation.
-
Maintenance of the luminaires is limited to their surfaces. During maintenance, no moisture can come into contact with any areas of the terminal connections or voltage control parts.
-
The electrical supply must be switched off at the outset, preferably using a switch in the distribution box, before any installation, maintenance, or repair work is undertaken.
-
Exterior lighting must not be installed during rain.
-
Take account of the minimal separation distance from other objects and the room required around the fitting.
-
If in any doubt, consult a professional, taking local installation requirements into account. Some countries stipulate that lighting may be installed only by registered installers.
-
Clamping screws in electrical connections must be adequately tightened. This is particularly the case with 12V low-voltage conductors.
-
Clean with a clean, dry cloth or brush, use no solvents or abrasives. Avoid dampness on all electrical components
-
Take account of all available technical information.
-
Meaning of symbols:
-
This icon indicates the level of water-proof and dust-proof
-
Protection Class I: the fitting must be earthed
-
Protection Class Il: the fitting is doubled insulated and does not require earthing
-
Protection Class III: the fitting is low-voltage
-
Minimum distance from lighted objects (meters)
-
The type of lamp and maximum size and wattage indicated in each lighting unit must not be exceeded; different items require different kind of light sources with different bulb icons
-
The armature is designed to work only with the indicated voltage. Different items require different working voltages.
-
The luminaire can be used in combination with a dimmer
-
The luminaire can be dimmed by a wall switch
-
The reference light angle and light space of the luminaire
This luminaire cannot be disposed of together with normal domestic waste in a standard rubbish can, but you have to bring it to a staging area for electrical waste -
Take note of the symbols when connecting wires:
FAQ
- How do I install the product?
- Follow the installation instructions provided in the user manual. Make sure to connect the correct incoming supply cables to the fitting.
- Can I exceed the maximum power consumption of 35W?
- No, it is important to not exceed the maximum power consumption specified to prevent damage to the product and ensure safe operation.
- What should I do if the product is not working?
- Check if the product is properly connected to the power supply and ensure the ON/OFF switch is in the correct position. If the issue persists, refer to the troubleshooting section in the user manual or contact our customer support.
- How should I clean the product?
- Use a soft, dry cloth to clean the product. Avoid using abrasive cleaners or solvents that may damage the surface.
- Can I disassemble or repair the product myself?
- No, it is not recommended to disassemble or repair the product yourself. Contact a qualified technician for any maintenance or repair needs.
If you have any other questions or concerns, please contact our customer support.
FittinQ B.V.
Smaragdweg 52, 5527 LB Hapert, The Netherlands
www.qazqa.nl
FittinQ LTD
55 Baker Street,
London, W1U 7EU
United Kingdom