makita DBC Series Chainsaw Instruction Manual

: June 16, 2024
: Makita

Table of Contents

Makita DBC Series Chainsaw
Product Information
Product Usage Instructions
Operation
Maintenance
Spare Parts List
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Makita DBC Series Chainsaw

Product Information

The DBC 3310, DBC 4010, and DBC 4510 are products manufactured by Makita Werkzeug GmbH. They are motorized tools designed for various applications. The products are available in different models with varying specifications. They are compact and lightweight, making them easy to handle and transport.

Specifications

Model : DBC 3310, DBC 4010, DBC 4510
Manufacturer : Makita Werkzeug GmbH
Dimensions : Varies based on model
Weight : Varies based on model

Product Usage Instructions

Safety Precautions

Before using the product, please read and understand the safety precautions mentioned in the user manual. Follow all safety guidelines to prevent accidents or injuries.

Assembly

Follow these steps to assemble the product:

Gather all the components mentioned in the user manual.
Refer to the assembly diagram provided in the manual for proper placement of each component.
Attach each component securely using the specified screws or fasteners.

Starting the Product

To start the product, follow these steps:

Ensure that the product is placed on a stable surface.
Check the fuel and oil levels as per the user manual instructions.
Turn on the ignition switch, if applicable.
Pull the starter grip firmly to start the engine.

Operation

Here are some general guidelines for operating the product:

Hold the product firmly with both hands.
Follow the user manual instructions for specific usage guidelines based on the application.
Adjust the speed or settings as required for the task at hand.
Regularly check and maintain the product as mentioned in the user manual.

Maintenance

Proper maintenance is essential for the longevity and performance of the product. Follow these maintenance guidelines:

Clean the product after each use to remove any debris or dirt.
Regularly check and replace worn-out parts as needed.
Keep the product stored in a dry and secure location when not in use.

FAQ

Q: What should I do if the product does not start?

A: If the product does not start, check the fuel and oil levels, ensure that the ignition switch is turned on, and try pulling the starter grip firmly again. If the issue persists, refer to the troubleshooting section in the user manual or contact customer support.

Q: How often should I perform maintenance on the product?

A: Regular maintenance should be performed as per the intervals mentioned in the user manual. However, it is recommended to visually inspect the product before each use and address any visible issues immediately.

Spare Parts List

Cylinder, crankcase, hood

DBC 3310, 4010, 4510

Seite| Pos.| DBC 3310| DBC 4010| DBC 4510| Teil- Nr. Part No.| Notes| Description| Specification
---|---|---|---|---|---|---|---|---
1| 1| 1| | | 384 100 760| | Engine cpl.| 33 cm3
1| 1| | 1| | 385 100 760| | Engine cpl.| 40 cm3
1| 1| | | 1| 386 100 760| | Engine cpl.| 45 cm3
1| 2| 1| | | 384 100 100| | Short block| 33 cm3
1| 2| | 1| | 385 100 100| | Short block| 40 cm3
1| 2| | | 1| 386 100 100| | Short block| 45 cm3
1| 3| 1| | | 384 131 012| | Cylinder| ø 37 mm
1| 3| | 1| | 385 131 012| | Cylinder| ø 40 mm
1| 4| | | 1| 386 131 011| | Cylinder| ø 43 mm
1| 5| 1| | | 957 132 384| | Piston assy.| ø 37 mm
1| 5| | 1| | 957 132 385| | Piston assy.| ø 40 mm
1| 5| | | 1| 957 132 386| | Piston assy.| ø 43 mm
1| 6| 1| | | 021 132 030| | Piston ring| ø 37 mm
1| 6| | 1| | 021 132 230| | Piston ring| ø 40 mm
1| 6| | | 1| 386 132 010| | Piston ring| ø 43 mm
1| 7| 1| 1| 1| 385 132 030| | Piston pin|
1| 8| 2| 2| 2| 385 132 040| | Spring ring|
1| 9| 1| 1| 1| 385 131 030| 4712 ➠| Gasket|
1| 10| 1| 1| 1| 965 527 010| ➠ 4711| Gasket|
1| 11| 1| 1| 1| 385 111 101| SI 2001/14| Crankcase assy.|
1| 12| 1| 1| 1| 385 120 100| | Crankshaft assy.|
1| 13| 1| 1| 1| 960 102 129| | Ball bearing|
1| 14| 1| 1| 1| 960 102 129| | Ball bearing|
1| 15| 1| 1| 1| 962 900 057| | Radial ring| 12x20x5
1| 16| 1| 1| 1| 962 900 060| SI 2000/06| Radial ring| 12x32x7
1| 17| 1| 1| 1| 939 620 371| | Key|
1| 18| 1| 1| 1| 962 211 033| | Needle cage| 10x14x13
1| 19| 4| 4| 4| 908 505 555| | Screw| M5x55
1| 20| 4| 4| 4| 928 014 000| | Cup spring|
1| 21| 4| 4| 4| 913 467 304| | Screw| 6,7×30
1| 22| 1| 1| 1| 385 118 611| | Hood, blue|
1| 23| 4| 4| 4| 908 605 205| | Screw| M5x10x20
1| 24| 1| 1| 1| 386 110 312| | Motor housing, black|
1| 25| 1| 1| 1| 001 131 020| | Nipple|
1| 26| m| m| m| 965 452 060| | Tube| 150 mm
1| 27| 2| 2| 2| 965 404 240| | Plug|
1| 28| 1| 1| 1| 980 114 201| USA| Label| SPARE PART