J BURROWS JBERGCOMBO Wireless Ergonomic Keyboard And Mouse Combo Instruction Manual
- June 16, 2024
- J.burrows
Table of Contents
J BURROWS JBERGCOMBO Wireless ErgonomicKeyboard And Mouse Combo
SPECIFICATIONS
- Keyboard & Mouse Wireless Technology: 2.4GHz RF
- Keyboard & Mouse Working Range: Up to 10 meters
- Keyboard & Mouse Battery Type: (2) AAA Batteries per device
- Keyboard Layout: 122-Key US
- Key Type: Membrane
- Keyboard Hotkeys: 17 Hotkeys (Windows, Internet and Multimedia)
- Keyboard Indicators: Battery Low, Num Lock & Caps Lock
- Keyboard Dimensions: 19.8″ x 8.3″ x 1″ (503 x 212 x 25 mm)
- Mouse Tracking Method: Optical Sensor
- Mouse DPI: 3 Levels – 800, 1200 (Default), 1600
- Mouse Dimensions: 4.5” x 2.9” x 1.5″ (115 x 74 x 38mm)
REQUIREMENTS
- Operating System: Windows® 10/8/7/XP, Mac OS X 10.7 or later
- Connectivity: Spare USB port for wireless receiver
CONTENTS
MOUSE DESCRIPTION
KEYBOARD DESCRIPTION
INSTALLATION
- Procedure of changing your batteries:
- Remove battery cover from mouse and keyboard battery compartment.
- Insert (2) AAA batteries into each device.
- Close the battery compartment cover.
- Turn both the keyboard & mouse power switch to ON.
- Turn on your computer and let computer load completely.
- Plug the USB wireless receiver into a USB port of your computer.
- Receiver will automatically connect with wireless keyboard and mouse. Now, they are ready to be used.
NOTE
- Computer will detect the keyboard, mouse and receiver automatically. No drivers are required.
- When devices can not connect efficiently, please press”CONNECT” button on the bottom of the device and re-pair. Refer to TROUBLESHOOTING Point 3.
TIPS
- When the low battery LED is on, it means that the device requires new batteries.
- Turn devices off when leaving your desk for more than an hour to save battery life and enable longer battery life.
TROUBLESHOOTING
If your keyboard or mouse cannot be operated, please try the following
- Make sure you have inserted two AAA batteries inside the battery compartment correctly and that the power switch of the keyboard and mouse is ON.
- Make sure you have connected the USB receiver correctly to the computer USB port. Move other devices 30 cm away from the receiver to avoid interference while pairing/connecting. To reconnect the keyboard or mouse to the USB receiver:
- Plug-in USB receiver to the computer and press CONNECT on the bottom of the keyboard or mouse within 15 seconds. To connect efficiently, please make sure that the keyboard or mouse is close to the USB receiver and the distance between the USB receiver and the device is no more than 30 cm.
- For the mouse, hold the middle and right buttons on the mouse together after pressing the CONNECT button.
Note: Wireless phones, routers, and other devices that use 2.4GHz frequency, might cause interference with wireless keyboards and mice. Please relocate such wireless appliances away from your keyboard and mouse.
HOTKEY DEFINITIONS
- Hotkey functions based on the Windows operating system. When used on Mac these may vary or not function.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>