Kuzco Lighting NCH57731-BK vola Incandescent Chandelier Installation Guide
- June 16, 2024
- Kuzco Lighting
Table of Contents
Kuzco Lighting NCH57731-BK vola Incandescent Chandelier
Specifications
- Product: Incandescent Chandelier
- Model: CH57731-BK/GO
Product Usage Instructions
-
Step 1: Remove the Fixture
Remove the fixture from its original package. -
Step 2: Separate Mounting Plate
Separate the mounting plate (1c) from the canopy (2a) by removing the canopy screws (2b). -
Step 3: Attach Mounting Plate
Attach the mounting plate (1c) to the electrical junction box (1a) using the junction box screws (1e) provided in the hardware package. -
Step 4: Determine Hanging Height
Determine the hanging height of the fixture by securing the rods (2d) to the canopy (2a) and fixture body (3a) after feeding the fixture wires through the rods. -
Step 5: Make Electrical Connections
Make proper electrical connections by connecting the black wire to hot L, white wire to neutral N, and ground wire to GND. Use the wire nuts (1b) provided in the hardware package. -
Step 6: Attach Shade
Attach the shade (3b) to the fixture body (3a) and secure it with the shade connector (3c), followed by the socket nut (3d). Use the socket nut tool (3e) to tighten the socket nut. -
Step 7: Attach Canopy
Attach the canopy (2a) to the mounting plate (1c) using the canopy screws (2b). -
Step 8: Insert Bulb
Insert the bulb (4a) into the fixture socket.
FAQ
-
Q: What should I do if the fixture is damaged?
A: If the fixture is damaged, please contact our technical support at 1-855-855-8926 for assistance. -
Q: Can I use LED bulbs instead of incandescent bulbs?
A: Yes, you can use LED bulbs as long as they are compatible with the fixture socket. -
Q: How do I clean the chandelier?
A: To clean the chandelier, gently wipe the surface with a soft, dry cloth. Avoid using any abrasive cleaners or solvents.
Incandescent Chandelier
CH57731-BK
INSTALLATION SHEET
START FROM HERE
- Make sure POWER is COMPLETELY OFF at the fuse box
- Have your fixture installed by a qualified licensed electrician
- Prepare everything in a clear area
- Wear gloves at all time during this installation
- Read instructions carefully before you start assembly
- Keep this installation sheet for future reference
Please Note:
- Black Finish Only
- 120V input
Technical Support: 1-855-855-8926
- Remove fixture from its original package
- Separate mounting plate (1c) from canopy (2a) by removing canopy screws (2b)
- Attach mounting plate (1c) to electrical junction box (1a) using junction box screws provided (1e) in hardware package
- Determine hanging height of fixture by securing rods (2d) to canopy (2a) and fixture body (3a) after feeding fixture wires through rods
- Make proper electrical connections (black to hot “L”, white to neutral “N”, ground to “GND”) with wire nuts (1b) provided in hardware package
- Attach canopy (2a) to mounting plate (1c) with canopy screws (2b)
- Insert bulb (4a) into fixture socket
Incandescent Chandelier
CH57731-BK/GO INSTALLATION SHEET
START FROM HERE
- Make sure POWER is COMPLETELY OFF at the fuse box
- Have your fixture installed by a qualified licensed electrician
- Prepare everything in a clear area
- Wear gloves at all time during this installation
- Read instructions carefully before you start assembly
- Keep this installation sheet for future reference
Please Note:
- Black/Glossy Opal Glass Finish Only
- 120V input
Technical Support: 1-855-855-8926
Assembly
- Remove fixture from its original package
- Separate mounting plate (1c) from canopy (2a) by removing canopy screws (2b)
- Attach mounting plate (1c) to electrical junction box (1a) using junction box screws provided (1e) in hardware package
- Determine hanging height of fixture by securing rods (2d) to canopy (2a) and fixture body (3a) after feeding fixture wires through rods
- Make proper electrical connections (black to hot “L”, white to neutral “N”, ground to “GND”) with wire nuts (1b) provided in hardware package
- Attach shade (3b) to fixture (3a) and secure with shade connector (3c), followed by socket nut (3d) using socket nut tool (3e)
- Attach canopy (2a) to mounting plate (1c) with canopy screws (2b)
- Insert bulb (4a) into fixture socket
19054 28th Avenue Surrey, BC Canada V3Z 6M3
- T: 604 538 7162
- TF: 1-855 85 KUZCO
- F: 604 538 7196
- W : kuzcolighting.com
- 20240109
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>